• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.76-86
• /
• 2007

This study was conducted to investigate the effects of formaldehyde to urea (F/U) mole ratio on thermomechanical curing of UF resin adhesives with different F/U mole ratios. Thermomechanical curing of these UF resin adhesives was characterized using parameters of dynamic mechanical analysis (DMA) such as the gel temperature, maximum storage modulus, and peak temperatures of storage and loss modulus. As the F/U mole ratio decreased, the gel temperature of UF resin adhesives increased. The maximum storage modulus as an indicator of the rigidity of UF resin adhesives decreased with decreasing F/U mole ratio. The peak temperature of tan $\delta$ increased with decreasing F/U mole ratio, indicating that the vitrification occurred faster for high F/U mole ratio of UF resin adhesives than for the one of lower F/U mole ratio. These results partially explained the reason why UF resin adhesives with lower F/U mole ratio resulted in relatively poor adhesion performance when they were applied.

• Korean Journal of Hydrosciences
• /
• 제5권
• /
• pp.33-43
• /
• 1994

This study is to determine the critical duration of design rainfall and to utilize it for the design of detention pond with pump station. To examine the effect of the duration and temporal distribytion of the design rainfall, Huff's quartile method is used for the 9 cases of durations (ranges from 20 to 240 minutes) with ten years return period, and the ILLUDAS model is used for runoff analysis. The storage ratio, which is the ratio of maximum storage amounts to total runoff volume, is introduced to determine the criticalduration of design rainfall. The duration which maximizes the storage ratio is adopted as the critical duration. This study is applied to 18 urban drainage watercheds with pump station in Seoul, of which the range of watershed area is 0.24~12.70$km^2$. The result of simulation shows that the duration which maximizes storage ratio is 30 and 60 minutes on the whole. It is also shown that the storage ratios of 2nd - and 3rd-quartile pattern are larger than those of 1st- and 4th-quartile pattern of temporal distribution. A simplified empirical formula for Seoul area is suggested by the regression analysis between the maximum storage ratio and the peak ratio. This formula can be utilized for the preliminary design and planning of detention pond with pump station.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.133-146
• /
• 1999

The charge operation of an ice storage system has been analyzed in this paper. The thermal characteristics of major components of the ice storage system. i.e., the refrigerator and the ice storage tank are evaluated from performance tests on an existing ice storage system. Based on the measured data for thermal characteristics, a simulation is carried out for the charge operation and the effect of the refrigerator size on the system performance is investigated. The results indicate that the larger the refrigerator size for a given storage capacity, the lower the inlet temperature of the ice storage tank so that the lower the efficiency of charge operation. It is also found that there exists an optimal size of the refrigerator with which the ice storage at the end of the charge operation is maximized, but the complete charge is not possible even with the optimally sized refrigerator. This leads to the result that the design capacity of the storage tank should be larger than the required amount of cold energy for the daytime cooling considering the practically chargeable amount of cold energy during the nighttime. Where the cooling load sharing of the storage is 40%, the nominal capacity of an ice storage tank needs to be larger than the required storage amount by 30%.

• 태양에너지
• /
• 제12권1호
• /
• pp.81-87
• /
• 1992

본 연구의 목적은 건물의 냉난방에 이용되는 현열이용형 축열조의 축열 특성을 규명하는데 있었다. 실험에 사용된 축열재는 자갈이었으며 일정한 온도조건하에서 축열재 사이를 통과하는 유체의 유동속도와 자갈의 크기별로 실험을 하였다. 자갈의 크기와 유속을 변화시켜 축열량과 축열효율을 실험적으로 구한 결과 축열재의 충진율이 72.5%이고 유속이 0.14m/s일 때가 최단시간 내에 최대축열량에 도달하였으며, 축열효율도 가장 높았다.

• 한국수자원학회논문집
• /
• 제36권3호
• /
• pp.385-398
• /
• 2003

내배수시설계획시 최대저류비에 의한 유수지 규모의 결정 방법은 이전 연구자에 의하여 제시된 바 있다. 본 연구에서는 동두천시 11개 소규모 내배수시설을 선정하여 분석한 결과, 배수면적이 작고 펌프기능이 강화된 내배수 시설에서는 강우지속기간별 우수지의 저류비의 차이는 미미하므로 최대저류비에 의한 조정지 규모의 결정은 무리가 있음을 알 수 있었다. 또한 최대저류비에 의하여 결정된 조정지 용량을 펌프에 의하여 배제되는 시간은 펌프의 허용시동간격보다 짧은 경우도 있어 펌프의 빈번한 작동을 초래한다. 그러므로 조정지는 펌프의 빈번한 작동에 의한 펌프 고장의 가능성을 피할 수 있는 규모로 결정되어야 한다. 다양한 펌프용량을 적용하여 분석한 결과, 소유역에서도 조정지의 기능이 강화된 내수배제시설에서는 최대저류비를 기준으로 한 조정지 용량의 결정은 펌프운영 측면에서 타당함을 알 수 있었다. 따라서 본 연구에서는 소규모 배수구역에서 조정지용량의 결정시 펌프의 계획배수량과 유수지의 용량에 따른 펌프의 시동빈도를 반영하여 기존의 최대저류비에 의한 방법을 개선한 방안을 제시하였다. 또한 유수지 규모와 펌프용량의 관계를 간단한 선형계획모형으로 분석한 결과, 종래의 유수지 홍수추적에 의한 유수지 용량 결정은 도시지역의 내배수시설 계획에만 타당함을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.280-285
• /
• 2001

This paper presents a modelling of thermal discharge performance for a static ice-on-coil ice-storage tank. Through the present study, discharging characteristics were examined with the existing results of theoretical and numerical heat transfer analyses. Also, an experiment was conducted to obtain a real set of discharge performance. The thermal effectiveness, the ratio of the actual heat transfer rate to the maximum possible heat transfer rate, decreased when the stored energy decreased during discharging period. And the effectiveness increased as the coolant flow rate through the storage increased, of which increasing rate decreased abruptly near the maximum and the minimum stored energy. An empirical correlation was obtained from the experimental and the numerical analysis data.

• 태양에너지
• /
• 제20권4호
• /
• pp.61-67
• /
• 2000

The purpose of this study is to improve heat transfer by attaching rectangular fins to tube. Experiments were carried out under the following conditions - Aspect ratio$(W_f/R_f)$ is 0.7, 1.2 and 1.8. Temperature conversion between high and low positions of water in the thermal storage appeared because maximum density point of water is about $4^{\circ}C$ and inlet direction of working fluid influenced conductive heat transfer Compared with the unfinned tube(bare tube), the rectangular tube increased the ice thermal storage energy and the ice thermal storage energy was increased as aspect ratio was increased.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.32-37
• /
• 2023

In this study, in order to propose a integrity evaluation for type IV high aspect ratio hydrogen storage vessel, a numerical analysis of the hoop tensile test and pressure test was performed using FEM software, and the results of the actual physical property test were reviewed. The property test and numerical analysis were compared, and very similar results were obtained with deviations of maximum tensile strength of 4.75% and fiber direction stress of 5.39%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권4호
• /
• pp.1342-1359
• /
• 2021

The data deduplication technique identifies the duplicates and minimizes the redundant storage data in the backup server. The chunk level deduplication plays a significant role in detecting the appropriate chunk boundaries, which solves the challenges such as minimum throughput and maximum chunk size variance in the data stream. To provide the solution, we propose a new chunking algorithm called Dynamic Prime Chunking (DPC). The main goal of DPC is to dynamically change the window size within the prime value based on the minimum and maximum chunk size. According to the result, DPC provides high throughput and avoid significant chunk variance in the deduplication system. The implementation and experimental evaluation have been performed on the multimedia and operating system datasets. DPC has been compared with existing algorithms such as Rabin, TTTD, MAXP, and AE. Chunk Count, Chunking time, throughput, processing time, Bytes Saved per Second (BSPS) and Deduplication Elimination Ratio (DER) are the performance metrics analyzed in our work. Based on the analysis of the results, it is found that throughput and BSPS have improved. Firstly, DPC quantitatively improves throughput performance by more than 21% than AE. Secondly, BSPS increases a maximum of 11% than the existing AE algorithm. Due to the above reason, our algorithm minimizes the total processing time and achieves higher deduplication efficiency compared with the existing Content Defined Chunking (CDC) algorithms.

• 한국수소및신에너지학회논문집
• /
• 제9권1호
• /
• pp.31-37
• /
• 1998

Ti-Cr-V의 3원계 합금에 대하여 결정구조 격자상수 및 $30^{\circ}C$에서의 수소저장 특성을 조사하였다. 실험영역에서 Ti-Cr-V의 3원계 합금은 거의 모두 bcc구조를 갖는 단일상으로 구성되어 있고, 수소저장용량 및 유효수소저장용량은 합금 조성의 Ti/Cr비에 크게 의존하였으며, Ti/Cr비 약 0.75에서 그 최대치를 보였다. 합금들의 격자상수는 Ti/Cr비가 증가함에 따라 직선적으로 증가하였다. Ti/Cr비와 격자상수, 수소저장용량 및 유효수소 저장용량의 관계를 각 원소의 수소와의 친화력 및 순금속에서의 격자상수의 차이로써 설명하였다.