• 한국콘텐츠학회논문지
• /
• 제7권11호
• /
• pp.102-110
• /
• 2007

본 논문에서는 UHF대역 중 900MHz 대역에서 동작하는 휴대용 RFID 리더를 설계하고 제작하여 그 제반 특성을 측정을 통하여 분석하였다. 측정 결과의 분석은 EPC Global에서 제안한 EPC Class 0 표준을 기준으로 수행되었다. 제안하는 RFID 리더는 약 11kbps의 속도로 태그와 데이터 통신을 수행하며, RF 최대 출력은 20dBm이다. 제안된 휴대용 RFID 리더는 초당 최대 68개의 태그를 인식할 수 있으며, 리더의 출력 전력이 20dBm인 경우 최대 인식 거리는 30cm 이다. 그리고 전체적인 크기는 $71mm{\times}55mm$로서 상용 제품과 비교했을 때 최대 90%, 최소 14% 감소된 것이다.

• 한국지반환경공학회 논문집
• /
• 제14권3호
• /
• pp.13-17
• /
• 2013

Determination of geotechnical characteristics of soil is either to use the field samples to measure the characteristics of soil through laboratory test or measuring the characteristics directly in the field. Field test can be derived similar value by considering characteristics of site and laboratory test can be confirmed the characteristic of soil by testing with field samples. This article describes relative density as the measure of compaction for cohesionless soils and presents several simple and mathematical relationships to help engineers estimate needed parameters for relative density calculations. The main purpose of this research is to investigate possible correlations between coefficient of uniformity, coefficient of curvature, maximum and minimum void ratio, mean grain size. Results show a linear relationship between the minimum and maximum void ratios and a power function relationship between coefficient of uniformity and the limiting void ratios. Void ratio range, which is the difference between the maximum and minimum void ratios, appeared to be log normally distributed but showed no simple mathematical fit to the data. these results were shown to help engineers estimate needed parameters for relative density calculations.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1425-1437
• /
• 2018

In this paper, a methodology was proposed to reduce the electrical level and spatial size of the smart grid with distributed generations (DGs) to a scale in which the electrical phenomena and control strategies for disturbances on the smart grid could be safely and freely experimented and observed. Based on the design methodology, a micro smart grid simulator with a substation transformer capacity of 190VA, voltage level of 19V, maximum breaking current of 20A and size of $2{\times}2m^2$ was designed by reducing the substation transformer capacity of 45MVA, voltage level of 23kV and area of $2{\times}2km^2$ of the smart grid to over one thousandth, and also reducing the maximum breaking current of 12kA of the smart grid to 1/600. It was verified that the proposed design methodology and designed micro smart grid simulator were very effective by identifying how all of the fault currents are limited to within the maximum breaking current of 20A, and by confirming that the maximum error between the fault currents obtained from the fault analysis method and the simulation method is within 1.8% through the EMTP-RV simulation results to the micro smart grid simulator model.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.951-960
• /
• 1997

Package crack caused by the soldering process in the surface mounting plastic package is evaluated by applying the maximum energy release rate criterion. It could be shown that the crack propagation from the lower edge of the ie pad is easily occurred at the maximum temperature during the soldering process, where the pressure acting on the crack surface is assumed by the saturated vapor pressure at maximum temperature. The package crack formation depends on various parameters such as chip size, relative thickness, material properties, the moisture content and soldering temperature etc. The quantitative measure of the effects of the parameters could be easily obtained by using the taguchi's method which requires only a few kinds of combinations with such parameters. From the results, it could be obtained that the more significant parameters to effect the package reliability are the orders of Young's modulus, die pad size, down set, chip thickness and maximum soldering temperature.

• Journal of the Korean Statistical Society
• /
• 제30권1호
• /
• pp.99-113
• /
• 2001

This paper deals with the problem of estimating the means in two inverse Gaussian populations with equal but unknown coefficient of variation. The maximum likelihood estimators are derived by solving a cubic equation and their asymptotic variances are presented for comparative purpose. Monte-Carlo simulation is conducted to investigate the efficiency of the estimators relative to the sample means over a wide range of values for the sample size and the coefficient of variation. The effect on this efficiency under the departure from the assumption of common coefficient of variation is also studied.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.909-917
• /
• 2003

Although many classification models have been used to classify binary data, none of the classification models dominates all varying circumstances depending on the number of variables and the size of data(Asparoukhov and Krzanowski (2001)). This paper proposes a classification model which uses information on marginal distributions of sub-variables and its maximum entropy distribution. Classification experiments by using simulation are discussed.

• 열처리공학회지
• /
• 제18권6호
• /
• pp.355-361
• /
• 2005

In this study, the effects of the maximum undeformed chip thickness on grinding characteristics of hardened steel in down-grinding have been investigated. The meaured grinding forces become larger as the workpiece velocity increases. The specific energy, e decreases as the maximum undeformed chip thickness increase. When the maximum undeformed chip thickness is the same, the specific energy, e decreases as the grain size increases.

• 한국인터넷방송통신학회논문지
• /
• 제21권5호
• /
• pp.27-32
• /
• 2021

본 논문은 16-QAM 신호 전송시 시분산 채널에서 발생되는 부호간 간섭을 경감시키기 위하여 사용되는 FC-MMA 적응 등화 알고리즘에서 고정 스텝 크기에 따른 등화 성능을 평가하였다. FC-MMA는 기존 MMA의 통신 채널의 시변 특성 및 순단과 같은 비정상적인 상황에서 신속하게 새로운 환경에 적응토록 빠른 수렴 속도를 갖는 것이 특성이지만, 수렴 속도는 고정 스텝 크기에 의하여 결정된다. 논문에서는 고정 스텝 크기값에 따른 등화 성능을 평가하였으며, 관련된 성능 지수로는 수렴 특성을 나타내는 잔류 isi와 최대 찌그러짐, MSE 및 잡음 강인성을 나타내는 SER과 군지연 보상 능력등이 사용되었다. 컴퓨터 시뮬레이션 결과 적응 스텝 크기가 클수록 정상 상태에 도달하는 수렴 속도는 개선되지만, 정상 상태 이후의 잔여량에서는 스텝 크기가 적을수록 우월해짐을 알 수 있었다. 본 연구 결과 FC-MMA 알고리즘은 초기에는 스텝 크기를 크게 설정하고, 정상 상태에 도달하면 이를 적게 조정하여 등화 잔여량을 최소화시킬 수 있을 것으로 기대된다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.669-677
• /
• 2009

철근콘크리트 연속 보의 전단거동에 대한 골재 최대직경의 영향을 평가하기 위하여 24개의 실험체가 실험되었다. 전경량, 모래경량 및 보통중량콘크리트 보에서 최대 골재직경은 4 mm에서 19 mm로 변하였으며, 전단경간비는 2.5와 0.6으로 있었다. 보통중량콘크리트 보의 무차원 최대전단내력에 대한 동일조건의 경량콘크리트 보의 무차원 최대 전단내력의 비가 ACI 318-05에서 제시하는 수정계수와 비교되었다. 파괴면에 대한 현미경 사진으로부터 경량콘크리트보의 파괴면은 주로 골재를 관통하지만 파괴되지 않은 경량골재들도 다수 발견되었는데, 이는 경량콘크리트 보의 전단거동 향상에 기여하였다. 이로 인해 경량콘크리트 연속 보의 최대전단내력은 골재 최대직경의 증가와 함께 증가하였는데, 그 증가기울기는 보통중량콘크리트 연속보에 비해 낮았다. ACI 318-05에서 제시하는 수정계수는 경량콘크리트 연속 보에서는 다소 불안전측에 있었는데, 그 불안전측은 최대 골재직경의 증가와 함께 증가하였다. 또한 ACI 318-05의 전단규정에 대한 안전성은 보통중량콘크리트 보에 비해 경량콘크리트 보에서 낮았다.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.468-474
• /
• 2014

This study was conducted to evaluate the characteristics of mesophilic fermentative $H_2$ production from food waste which was treated by food waste disposer. It was found that $H_2$ yield and lag phase were affected by particle size of food waste. The $H_2$ yield decreased with increasing particle size while lag phase increased. The maximum $H_2$ yield was found $0.584{\pm}0.03$ mol $H_2$/mol hexose at particle size smaller than 0.30 mm. The $H_2$ production rate was also affected by chemical composition of food waste. The $H_2$ production rate linearly decreased with increasing proteins to carbohydrates ratio(P/C ratio) where the maximum value was $0.031{\pm}0.006$ mol $H_2$/mol hexose h at 0.17.