• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.174-182
• /
• 1993

Performance of 3 indica ${\times}$ japonica(Chilseungbyeo, Samgangbyeo, and Gayabyeo), 7 japonica(Yeongsanbyeo, Yeongdeugbyeo, Hwajinbyeo, Palgongbyeo, Seumjinbyeo, Tamjinbyeo, and Milyang 95), and 2 indica(Tebonnet and Lemont) rice varieties was tested at 1, 3, 5, and 7cm seeding depths in a growth chamber and field. In the growth chamber the number of days from seeding to seedling emergence increased as seeding depth increased, while percent germination and emergence and emergence / germination ratio decreased. However, in the field seedling emergence at 1em seeding depth delayed slightly compared to 3cm probably due to lack of soil moisture. The number of seedlings and maximum tillers at 1, 3, and 5cm seeding depths was similar, but it was higher compared to 7cm seeding depth. Yield and yield components were similar among the seeding depths when all the varieties averaged although 1,000-grain weight was slightly higher at 7cm deeding depth compared to others. At 1cm seeding depth the length of mesocotyl of all varieties was similar and ranged 0.1-0.2cm and that of coleptile ranged 0.8-1.1cm. As seeding depth increased up to 7cm Tebonnet which showed the highest percent emergence emerged by elongation of both mesocotyl and coleoptile, while the other varieties emerged largely by elongation of coleoptile.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.326-336
• /
• 2003

In order to modify the construction of gizzard shad coastal purse seine net with possible to the laborsaving of fishing operation in the coastal small fishing vessels, the model experiments were carried out on the model nets for several conventional nets using in the field and the experimental nets was manufactured as 1/100 and 1/60 of the full scale net. The results obtained are summarized as follows；1. In the case of the conventional net and reduction rate 75% in conventional net with purse line the fishing efficiency decreased, the lead line was upward for the surface and the pursing depth of pursing line was very shallow to 2∼3m. 2. In the case of the net having maximum depth in center part designed in this study, the length of float and lead line was 60% of conventional net, the depth of net was fixed 20m to selvage line of the both of the end and extend gradually with 50m, 40m, 30m to the center. Among the these net, depth of pursing line was 20∼23m for 50m and 7∼15m for 40m, 30m the depth of net. These results were suitable for interception of fish school in fishing ground, but several problems will be caused by the depth and current of fishing ground.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.135-142
• /
• 2015

Floating offshore structures should be designed by considering the most extreme environmental loadings which may be encountered in their design life. The most severe loading on a wave-offshore wind hybrid power generation system is wave loads. The principal parameters of wave loads are wave length, wave height and wave direction. The wave loads have different effects on the structural behavior characteristic depending on the combination of wave parameters. Therefore, the process of investigation for critical loads based on the individual wave loading parameter is need. Namely, the equivalent design wave should be derived by finding the wave condition which generates the maximum stress in entire wave conditions. Through a series of analysis, an equivalent regular wave height can be obtained which generates the same amount of the hydrodynamic loads as calculated in the response analysis. The aim of this study is the determination of equivalent design wave regarding to characteristic global hydrodynamic responses for wave-offshore wind hybrid power generation system. It will be utilized in the global structural response analysis subjected to selected design waves and this study also includes an application of global structural analysis.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.261-269
• /
• 2013

This paper describes the design and development of VSI (VLBI standard interface) optical adapter for transmitting VLBI(Very long baseline interferometry) observation data with optical signal. VSI cable comprised of 80-line is being used for observed data transmission with maximum length of 5-meter between playbacks (Mark5B, VERA2000) and raw VLBI data buffer (RVDB), RVDB and VLBI correlation subsystem (VCS) in Daejeon correlator. It has a plan to conduct the data processing for 16-stations and introduce the 14 RVDB systems in near future. And data loss frequently occurred because of trouble of VSI cable MDR80 connector. By considering the data loss by connector error of VSI cable, RVDB system extension plan, effective space usage and long distance data transmission(e-VLBI), the VSI optical adapter was proposed and developed for effectively transmitting and receiving VLBI data through optical signal. In order to confirming the performance of developed VSI optical adapter, the experiments for data transmission was conducted between playback and RVDB system, and confirmed that data transmission was clearly done without any data loss.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.65-75
• /
• 1973

Morphological variations of the Korean Oyster, Crassostrea gigas, were studied on the basis of the oyster samples collected from seven ecologically different areas in May and October of 1972 respectively. The sampling areas were Daecheon and Buan in the west coast, Namseong, Cha-myeon, Imyeong and Chubong in the south coast and Pohang in the east coast. The average sizes of the oysters of the west coast were smaller than those of the south coast as well as those of the east coast. The oysters of the east were largest in size, The oysters from subtidal habitats (Chubong and Pohang) had elongated shells and those from intertidal habitats (Buan, Namseong, Imyeong and Chamyeon) had slanted shells. The samples from subtidal habitats showed size variations depending on cultural methods applied. The oysters from Chubong reared by hanging method had their shells as compared to those from Pohang reared by bottom culture method. The ratio of shell height to shell length showed a great variation froms areas to areas with a significant differences. The fatness (meat weight / shell weight) of all the samples collected in October revealed higher value than those collected in May. The oysters from Chubong showed maximum fatness, and those of Pohang showed minimum fatness. Seasonal variations in fatness was not significant in Chubong. On the other hand, it was relatively significant in the oysters from Pohang, Chamyeon, Imyeong and Buan. Water content of the oyster meat was greater in October than in May. It also showed variations in the sampling areas with higher values in the oyster from Imyeong and Chamyeon than those from Chubong, Pohang and Daecheon.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.6
• /
• pp.489-500
• /
• 1987

Annual reproductive cycle of Bluegill, Lepomis macrochirus (RAFINESQUE) were studied in the natural population. Based on these informations, reproductive mechanism of the fish including activation, degeneration and remature were examined under the controlled conditions of temperature and photoperioe. In the natural populations, gonads began to grow with the temperature increase in March ana matured in June, and spawning occurred in July. With the onset of the shorter day-length and the maximum temperature condition in August, the gonads began to degenerate. Resting stage was continued during winter season. In the laboratory-reared population, activation of the gonads was initiated by the complex environmental factors including higher temperature$(>15^{\circ}C)$ and longer photoperiod $(>14L)$. For the maturation, photoperiod of more than 14 hours was critical. Under this condition higher temperature was the only compensative factor. Regeneration of the gonads was induced by higher temperature$(>25^{\circ}C)$ and the shorter photoperiod accelerated the regenerative processes. Even from the resting stage the gonads can be induced to matured stage by the longer photoperiod $(>15L)$. Based on these observations, the reproductive rhythm of this fish is supposed to be artificially controlled.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.217-220
• /
• 1981

A trematode, Cercaria tapidis which is parasitic to short necked clam, Tapes philippinarum was studied in terms of its morphology and incidence of infection rate. The host bivalve was collected from Solri near Gunsan from September 1980 to August 1981. Sporocysts were observed mainly in tissues of gonad of the short necked clams. Minimum infection rate ($0.85\%$) was found in May, while maximum infection rate ($23.27\%$) in December. The sporocyst is 1.1 mm long and 0.27 mm wide. Ellipsoidal body of cercaria is $283{\mu}m$ long and $120{\mu}m$ wide. Oral sucker is much larger than ventral sucker. Moderately small pharynx, a long esophagus, and a long intestine reaching to the posterior end of the body are distinctive. Globular excretory bladder is located at the posterior part of the body and bears numerous granules of various size. The flame-cell arrangement is represented by a formula 2[(3+3+3)+(3+3)]=30. Tail is five times body length.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.39-47
• /
• 2012

This paper describes large-scale pullout test results of geosynthetic strip, which can be applied in reinforced earth wall with block-type wall facing. The pullout tests are conducted to evaluate the strain distribution, the induced pullout force and the pullout strength. The maximum pullout force is appeared regardless of reinforcement width and normal stress when end displacement is less than 15 mm. The pullout behavior based on horizontal spacing of reinforcement was similar in relationship between pullout force and end displacement. The strain distribution and pullout force distribution of the geosynthetic strip are concentrated in the front part of reinforcement, and it appeared clearly in higher normal stress condition This means that the pullout behavior of geosynthetic strip is affected by the bond between soil and friction resistance reinforcement according normal stress. Therefore, the pullout resistance design is reasonable when pullout behavior of geosynthetic strip should be evaluated by effective length considering tensile characteristic.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.15-22
• /
• 2013

By changing from ballasted track to concrete slab track, new type railroad subgrade is strongly required to satisfy strict regulations for displacement limitations of concrete slab track. In this study, sensitivity analysis was performed to assess the design characteristics of new type reinforced railroad subgrade, which could minimize residual settlement after track construction and maintain its function as a permanent railway roadbed under large cyclic load. With developed design program, the safety analysis (circular slip failure, overturning, and sliding) and the evaluation of internal forces developed in structural members (wall and reinforcement) were performed according to vertical installation spacing and stiffness of short and long geotextile reinforcement. Based on this study, we could evaluate the applicabilities of 0.4 H short geogrid length with 0.4 m vertical installation spacing of geotextile as reinforcement and what the ground conditions are for the reinforced railroad subgrade. And also, we could grasp design characteristics of the reinforced railroad subgrade, such as the importance of connecting structure between wall and reinforcement, boundary conditions allowing displacement at wall ends to minimize maximum bending moment of wall.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.76-79
• /
• 2016

This paper describes the successful development and the performance of X-band 50 W pulsed power amplifier using a 50 W GaN-on-SiC high electron mobility transistor. The GaN HEMT with a gate length of $0.25{\mu}m$ and a total gate width of 12 mm were fabricated. The X-band pulsed power amplifier exhibited an output power of 50 W with a power gain of 6 dB in a frequency range of 9.2~9.5 GHz. It also shows a maximum output power density of 4.16 W/mm. This 50 W GaN HEMT and X-band 50 W pulsed power amplifier are suitable for the radar systems and related applications in X-band.