• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.790-794
• /
• 1997

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions such as seismic loading are required to provide appropriate safety assessment to those mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique with a special experimental behavior under high strain rate loading condition In this paper, dynamic deformation behaviors of A15052-H32 under high strain rate tensile loading are determined using the SHPB technique.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.174-176
• /
• 2002

A total of 134 patients with stage 1 of non-small cell lung cancer treated by carbon ion beam of HIMAC NIRS were investigated for control rate and delivered dose. The delivered dose of every patient was converted to biological effective dose (BED) of LQ model using fraction number, dose per fraction and alpha beta ratio which shows the maximum correlation between BED and tumor control. The BED of every patient was classified to establish a BED response curve for control. Assuming fraction numbers, dose response curves were introduced from BED response curve. The total doses to realize several control rates were obtained for the treatment of small fraction number.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.350-352
• /
• 2002

In order to speed up basic concept is to enhance high speed, curve limit speed, cross limit speed, acceleration/deceleration speed. It is important to optimal interface, fundamental technology of vehicle, rail, electrical power, and signal system. Tilting train has advantage minimizing investment cost of infra railway system for increasing train limit speed in curve. the developed tilting train should be operated to commercial service speed 180km/h of 200km/h at KNR upgrade railroad. This paper proposed the basic model of system engineering for developing of tilting EMU(maximum operation speed : 180km/h) with speed-up of conventional railway system.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.19-29
• /
• 2014

In addition to the development of micro hydro turbine, the challenge in micro hydro turbine design as sustainable hydro devices is focused on the optimization of turbine runner blade which have decisive effect on the turbine performance to reach higher efficiency. A multi-objective optimization method to optimize the performance of runner blade of propeller turbine for micro turbine has been studied. For the initial design of planar blade cascade, singularity distribution method and the combination of the Bezier curve parametric technology is used. A non-dominated sorting genetic algorithm II(NSGA II) is developed based on the multi-objective optimization design method. The comparision with model test show that the blade charachteristics is optimized by NSGA-II has a good efficiency and load distribution. From model test and scale up calculation, the maximum prototype efficiency of the runner blade reaches as high as 90.87%.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.87-100
• /
• 2002

Poorly-posed problems in the balanced discriminant analysis was considered. We restrict consideration to the case of observations and the number of variables are the same and small. When these problems exist, we do not use a maximum likelihood estimates(MLE) to estimate covariance matrices. Instead of MLE, an alternative estimate for the covariance matrices are proposed. This alternative method make good use of two regularization parameters, $\lambda$} and $\gamma$. A new test rule for the discriminant function is suggested and examined via limited hut informative simulation study. From the simulation study, it is shown that the suggested test rule gives better test result than other previously suggested method in terms of error rate criterion.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.51-56
• /
• 2006

This paper proposes a control algorithm, which is verified experimentally, for aspherical surface grinding and polishing. The algorithm provides simultaneous control of the position and interpolation of an aspheric curve. The nonlinear formula for the tool position was derived from the aspheric equation and the shape of the tool. The function was partitioned at specific intervals and the control parameters were calculated at each control section. The position, acceleration, and velocity at each interval were updated during the process. A position error feedback was introduced using a rotary encoder. The feedback algorithm corrected the position error by increasing or decreasing the feed speed. In the experimental verification, a two-axis machine was controlled to track an aspherical surface using the proposed algorithm. The effects of the control and process parameters were monitored. The results demonstrated that the maximum tracking error with tuned parameters was at the submicron level for concave and convex surfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.908-911
• /
• 2002

This paper investigates the characteristics of deflection for circular plate that has same supporting condition along the width direction of plate according to the area change of supporting end. For two boundary conditions such as simple supporting and clamping on both ends, this study derives maximum deflection formula of circular plate using differential equation of elastic curve, assuming that a circular plate is a beam with different widths along the longitudinal direction. The deflection formula of circular plate is verified by carrying out finite element analysis with regard to the ratio of length of supporting part to radius of circular plate.

• Water for future
• /
• v.24 no.1
• /
• pp.99-107
• /
• 1991

This study is for simulating to the model which analyzes flow characteristics and transverse bed slopes in a coarse-streambed of the meandering alluvial channels. Using the equations for conservation of mass, momentum, and for lateral stability of the streambed, a linear differential equation of transverse bed slope is derived from the flow characteristics in curved channels. Its solutions are solved by the Sine-generated curve method(SCM) and compared with results of field measurements. Lag distances by the maximum transverse bed slope and velocity profiles will predict risk sections of concave bank under floods.

• Archives of Pharmacal Research
• /
• v.6 no.2
• /
• pp.103-108
• /
• 1983

Such sulfur-containing drugs as chlorpromazine, sulfonamides and thiazides were determined by gas chromatography with flame photometric detector (FPD) and flame ionization detector (FID). 0.6% QF-1 or 3% SE-30 on Chromosorb WAWDMCS were found suitable for drugs listed above. In the experimental conditions given maximum response the FPD response and the response ratio of FPD increased with the number of sulfur atom per molecule. It was possible to obtain a linear calibration curve from $10^{-9}$ / mole to $2{\times}10^{-8}$ / mole and to analyze variety of sulfur drugs by the calibration curve of one sulfur standard.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.60.1-60.1
• /
• 2010

본 연구에서는 년 최대 홍수량의 발생에 대한 대안으로 사용하는 PMF 추정에 관한 내용을 중심으로 분석하고자 한다. PMF를 산정하는 매개변수 도달시간(Time of concentration, TC)과 저류상수(Storage constant, K), 유출곡선번호(Runoff curve number, CN), 감수상수(Recession constant, RC), 초기손실(Initial loss, IL), 초기기저유량(Initial base flow, IBF), Threshold(TQ)들 중 CN값을 고정 하였을 때와 고정하지 않았을 때로 나눠 산정된 각각의 PMF와 기 발표된 PMF와 상호비교 분석을 통해 신뢰성 있는 분석방법을 제시하였다.