• 제목/요약/키워드: maximum allowable concentration

검색결과 36건 처리시간 0.025초

중국 보이차의 무기성분 특성 평가 (The Evaluation of Inorganic Components with Pu-Erh Tea)

  • 조영만;정영식
    • 한국식품영양학회지
    • /
    • 제32권5호
    • /
    • pp.401-407
    • /
    • 2019
  • This study compares and analyzes inorganic components of four different Pu-erh tea species consumed in Korea. The criteria for the inorganic components was based on the Royal Institute of Technology (KTH) recommendations. Out of the 19 general items: potassium, manganese, silicon and fluorine were detected in amounts exceeding the maximum allowable concentration by 5~23, 57~91, 1.6~1.8 and 9~18 times respectively. Out of the 15 potentially harmful elements: aluminum and nickel were exceeded the Maximum allowable concentration by 9~14 times and 0.8~1.2 times respectively. To reduce the concentration of inorganic elements in excess of the maximum allowable concentration, the extraction time of tea should be less than 1 minute in addition to limiting the amount. The amount of Pu-erh tea for extraction was about 0.1 g manganese, about 0.3 g potassium, about 0.5 g fluoride and about 2 g silicon. Therefore, the maximum amount of tea for extraction should be 0.1 g in regards to the safety of Pu-erh tea. Based on the recommended maximum daily intake of inorganic ingredients by the Ministry of Food and Drug Safety, it is desirable that the number of extractions be less than three.

선박평형수 처리장치의 활성물질 농도에 관한 고찰 (Consideration on the Concentration of the Active Substances Produced by the Ballast Water Treatment System)

  • 김은찬;오정환;이승국
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권3호
    • /
    • pp.219-226
    • /
    • 2012
  • 국제해사기구(IMO)는 선박평형수를 통한 수중생물의 이동을 막기 위해, 2004년 선박 평형수와 침전물 통제 및 관리를 위한 국제협약을 채택하였다. 34개 선박평형수 처리장치가 IMO 활성물질 승인을 받았고, 이 가운데 20개 처리장치가 최종승인을 받았다. 본 논문에서는 IMO 활성물질 승인을 받은 처리장치에 대한 작용 원리와 총잔류산화제(TRO) 농도를 고찰하였다. TRO 최대 허용 배출 농도는 중화장치를 통해 낮추어 대부분 0.2 ppm 이하의 농도를 보였으나, 최대 처리 허용 농도는 장치별로 1-15 ppm으로 큰 차이를 나타내었다. 처리장치 별로 TRO 처리 허용 농도의 차이는 처리장치의 특성 및 필터의 유무와 종류 등과의 연관성 보다는 생물 사멸시험 시 생물종 특성과 수온, 탁도 등 수질 특성에 기인하는 바가 크다고 판단된다.

Transition Characteristics and Risk Assessment of Heavy Metal(loid)s in Barley (Hordeum vulgare L.) Grown at the Major Producing Districts in Korea

  • Kim, Da-Young;Kim, Won-Il;Yoo, Ji-Hyock;Kwon, Oh-Kyung;Cho, Il Kyu
    • 한국환경농학회지
    • /
    • 제40권1호
    • /
    • pp.60-66
    • /
    • 2021
  • BACKGROUND: The concern over heavy metal(loid)s in arable land and agricultural products increases for public health in recent years. This study aims to identify transition characteristics of heavy metal(loid)s and to assess dietary risk in barley grown at the major producing districts in Korea. METHODS AND RESULTS: The soil and barley samples were collected from 38 locations around the major producing districts at Jeollabuk-do in Korea for the propose of examining the concentrations of heavy metal(loid)s. The 34 barley samples were separately purchased on the market for the same survey. The average concentration and range of arsenic (As), cadmium (Cd) and lead (Pb) in barley grown at the major producing districts in Korea were 0.037 (0.016-0.094), 0.028 (0.004-0.083) and 0.137 (0.107-0.212) mg kg-1, respectively. Currently, the maximum allowable level for barley Pb is set at 0.2 mg kg-1 in Korea, and the monitoring results suggested that some samples exceeded the maximum allowable level and required appropriate farming management. Bio-concentration factor values by heavy metal(loid)s in barley were high at Cd, copper (Cu) and zinc (Zn), similar to other crops, while As and Pb were low, indicating low transferability. CONCLUSION: Human exposure to As, Cd and Pb through dietary intake of barley might not cause adverse health effects due to relatively low concentrations, although the Pb in some barley was detected higher than the maximum allowable level. Further study on uptake and accumulation mechanism of Pb by barley might be required to assess the human health risk associated with soil contamination.

축산용 갈탄 난방기의 개발과 성능시험 (Development of a Lignite Coal Heater for Livestock Facilities and Performance Test)

  • 장동일;한우석;임영일;장요한;염호
    • 한국축산시설환경학회지
    • /
    • 제5권2호
    • /
    • pp.101-106
    • /
    • 1999
  • This study was conducted to develop a lignite coal heater which can be used to livestock facilities and to test performance of the heater developed. Experimental results are as following: 1. Heating capacity of the heater was 85,000 kcal/h. 2. The concentrations of CO gas in the exhaust gas were the maximum of 759 ppm and the average of 319 ppm; for the concentrations of NOx, the maximum of 212 ppm and the average of 57 ppm ; for the concentrations of SO2 gas, the maximum of 302 ppm and the average of 99 ppm. As the values were less than the allowable concentration limites, they did not violate the air environment law. 3. Problems such as frequent interruption of fuel supply and bridge state were happened. Therefore, it was required that these should be resolved in the future.

Effects of Carbon and Nitrogen Sources on Fatty Acid Contents and Composition in the Green Microalga, Chlorella sp. 227

  • Cho, Sun-Ja;Lee, Duk-Haeng;Luong, Thao Thanh;Park, So-Ra;Oh, You-Kwan;Lee, Tae-Ho
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권10호
    • /
    • pp.1073-1080
    • /
    • 2011
  • In order to investigate and generalize the effects of carbon and nitrogen sources on the growth of and lipid production in Chlorella sp. 227, several nutritional combinations consisting of different carbon and nitrogen sources and concentrations were given to the media for cultivation of Chlorella sp. 227, respectively. The growth rate and lipid content were affected largely by concentration rather than by sources. The maximum specific growth was negatively affected by low concentrations of carbon and nitrogen. There is a maximum allowable inorganic carbon concentration (less than 500~1,000 mM bicarbonate) in autotrophic culture, but the maximum lipid content per gram dry cell weight (g DCW) was little affected by the concentration of inorganic carbon within the concentration. The lipid content per g DCW was increased when the microalga was cultured with the addition of glucose and bicarbonate (mixotrophic) at a fixed nitrogen concentration and with the lowest nitrogen concentration (0.2 mM), relatively. Considering that lipid contents per g DCW increased in those conditions, it suggests that a high ratio of carbon to nitrogen in culture media promotes lipid accumulation in the cells. Interestingly, a significant increase of the oleic acid amount to total fatty acids was observed in those conditions. These results showed the possibility to induce lipid production of high quality and content per g DCW by modifying the cultivation conditions.

축전식 탈염 시스템에서 전하량 제어를 통한 경도물질의 안정적인 탈염 (Stable Desalination of Hardness Substances through Charge Control in a Capacitive Deionization System)

  • 김윤태;최재환
    • 공업화학
    • /
    • 제30권4호
    • /
    • pp.472-478
    • /
    • 2019
  • 막 축전식 탈염(MCDI) 셀에 공급하는 총 전하(TC)를 조절하여 경도물질($Ca^{2+}$)을 안정하게 탈염할 수 있는 방법을 연구하였다. 흡착과정에서 TC를 변화시키면서 흡착(1.5 V)과 탈착(0.0 V)을 30회 반복하였다. 탈염과정에서 유출수의 농도와 pH, 흡착 및 탈착량, 전류밀도와 셀 전위의 변화를 분석하였다. MCDI 셀에 사용된 탄소전극의 최대허용전하(MAC)는 46 C/g로 측정되었다. MAC 이하의 TC (40 C/g)에서 운전한 결과 전극반응이 일어나지 않아 장기간 운전에서도 안정적인 탈염특성을 얻을 수 있었다. 반면, MAC 이상의 TC (50, 60 C/g)에서 운전한 경우 유출수의 농도와 pH가 크게 변하였다. 또한 전극반응으로 인해 전극표면에 스케일이 생성되어 셀의 전기저항이 점차 증가하였다. 이를 통해 흡착과정에서 MCDI 셀에 공급하는 전하를 제어함으로써 전극반응 없이 경도물질을 안정하게 제거할 수 있음을 확인하였다.

분해성 액상폐기물의 해양처리시 최적 투기율 (Optimum Dumping Rate of Biodegradable Liquid Waste in Ocean Disposal)

  • 이석모
    • 한국수산과학회지
    • /
    • 제23권3호
    • /
    • pp.198-207
    • /
    • 1990
  • 하천과 연안의 극심한 오염을 유발하고 있는 액상폐기물을 동해남부해역에 투기할 목적으로 용존산소분포에 기초하여 허용농도와 최적투기율을 결정하였다. 허용농도 산출은 Streeter-Phelps 모델을 이용하였으며 이 모델의 인자인 탈산소계수는 2개월 간격으로 1년동안 각 수심별 해수에 유기물을 주입한 후 산소소모양을 측정하여 Thomas slope method에 따라 구하였고, 재폭기계수는 Redfield의 폐쇄계모델을 적용, 1년간의 현장관측재료와 C. S. K 자료를 이용하여 산출하였다. 투기율은 Csanady의 초기희석 이론을 적용하였다. 연구결과 표층에서 각 수심까지의 탈산소계수는 하계 $0.24\~0.29/day$, 동계 $0.17\~0.20/day$였으며, 재폭기계수는 하계 $0.03\~0.39/day$, 동계 $0.04\~0.56/day$이었다. 이들 인자로써 초기희석수괴의 용존산소를 $5mg/{\iota}$ 이상으로 유지할 수 있는 각 수심까지의 허용농도는 하계 $2.83\~7.33mgBOD/\iota$, 동계 $4.37\~18.83mgBOD/\iota$이었다. 혼합수심(H)과의 관계를 이용하여 산출된 허용농도($mgBOD/\iota$)는 하계 $17.23\times(H)^{-0.37}$, 동계 $54.96\times(H)^{-0.62}$으로 표현할 수 있었다. 이 허용농도에 기초하여 최적투기율($m^3/sec$)은 이호의 폭(b, m), 흘수(h, m) 그리고 폐기물의 BOD($L_n$, $mg/\iota$)의 함수로 하계에는 $R=275{\times}bh^{0.63}/L_n$, 동계에는 $=745{\times}bh^{0.48}L_n$으로 산출되었다. 이러한 차리는 하계와 동계의 용존산소농도 분포와 이를 좌우하는 각 인자에 기인한 것이다.

  • PDF

함수의 천일증발촉진성 색소에 관한 시험 (Study on the dyestuff for acceration solar evaporation)

  • 장판섭
    • 약학회지
    • /
    • 제3권1호
    • /
    • pp.26-34
    • /
    • 1957
  • The solar evaporation method is one of the most important and popular salt manufecturing method in Korea. The rate of evaporation of sea water depends on a complex climate factors. Of these factors, the most important is solar radiation and in particular the extent to which it is absorbed in the brine. By the addition of suitable dyestuff, a further increase in absorption is obtained and can result in all the radiation entering the brine being made available as heat. "Solivap Green", one of several dyestuffs which have been suggested for accelerating solar evaporation, was tested in this experiment. The results of the experiment. 1. Increase the evaporation rate of brine up to 20-25%. 2. Elevate the temperature of brine 2-$4^{\circ}C$. higher than that of brine adding no dyestuff. 3. Optimum dyestuff concentration is 25-30 mg/L and allowable maximum concentration can not exceeded 1000 mg/$m^2$ (50 mg/L). 4. Addition of dyestuff does not cause the degradation of salt produced. 5. A conversion table which indicates the concentrations for various depths of brine was prepared for engineering purpose. 6. Absorption spectrum of the dyestuff was studies, but toxicological and structural studies for the dyestuff have not been done in this experiment.

  • PDF

낙동강 중류부에서의 확정론적 수질해석 (Deterministic Water Quality Analysis in the Midstream of the Nakdong River)

  • 한건연;이정식
    • 물과 미래
    • /
    • 제27권1호
    • /
    • pp.53-67
    • /
    • 1994
  • 낙동강 중류부에서의 수질해석을 위한 확정론적 수질모형을 개발하였으며 확정론적 수질해석 모형 RQ1은 수리, 수문학적 해석을 위한 RQ1-1과 수질해석을 위한 RQ1-2로 구성되어 있다. 낙동강 중류부의 수질 해석을 위하여 왜관에서 진동에 이르는 이 유역의 월별 평균유량과 최소유량을 산정하였고 하도단면의 기하학적 특성을 기초로 하여 불등유해석을 실시하므로써 수질해석에 필요한 수리학적 특성치를 계산하였다. 확정론적 수질해석모형에 의한 수질해석 결과 BOD의 최대지점은 금호강 합류점 또는 진천천 합류점, DO의 최소 지점은 현풍하류부로 나타났다. 수질모형에 의한 계산결과치는 수개지점에서의 실측지와 합리적인 범위내에서 일치되고 있었으며 이 유역에서 목표수질에 도달하기 위한 금호강에서의 최대 BOD 허용부하량을 산정하여 제시하였다.

  • PDF

원자로에 있어서 Xenon 독소의 최적제어 (Optimal Control of Xenon Poison In Nuclear Reactor)

  • 곽은호;고병준
    • 대한전자공학회논문지
    • /
    • 제13권5호
    • /
    • pp.17-23
    • /
    • 1976
  • 고속열중성자로에서 정상 운전중인 원자로를 운전정지하였다가 재가동할 때 가장 문제가 되는 것은 핵분열 생성물인 Xe135의 독소작용이다. 이것은 Xe135가 원자로 출력에 영향을 주는 열중성자에 대한 흡수단면적이 크고 그의 반감기가 길기 때문이다. 그러므로 원자로의 일시적 운전정지가 요구될 때 이의 재가시에는 반듯이 이 독소를 능과할 수 있는 충분한 초과반응도를 가해 주던지, Xe135가 붕괴되어 그의 농도가 줄어든 이후에야 원자로의 재가동이 가능하게 된다. 위와 같은 문제는 사실상 원자로 운전시 안전성 뿐만 아니라 경제성에도 큰 영향을 주고 있다. 본 논문에서는 이 점을 고려하여 Pontoyagin의 최대원리를 이용하여 운전정지를 최적화시키므로서 언제든지 원자로를 전출력으로 재가동할 수 있도록 운전정지 방법을 개선하였다. 그러나 제어과정에서나 그 이후에도 X, 농도는 제어된 허용치를 넘지 않고 최소시간 이내에 모든 제어를 끝내도록 하였다. The buildup of fission product, i.e. Xe-135 poisoning, is a prime factor in restarting a nuclear reactor from the shutdown, which was under normal operation in the high flux thermal reactor, It is caused by the high absorption crosssection of Xe-135 to thermal neutrons and its long half life, from which the thermal power is affected. It is then possible to restart a nuclear reactor after the sufficient excess reactivity to override this poisoning must be inserted, or its concentration is decreased sufficiently when its temporary shutdown is required. As ratter of fact, these have an important influence not only on reactor safety but also on economic aspect in operation. Considering these points in this study, the shutdown process was cptimized using the Pontryagin's maximum principle so that the shutdown mirth[d was improved as to restart the reactor to its fulpower at any time, but the xenon concentration did not excess the constrained allowable value during and after shutdown, at the same time all the control actions were completed within minimum time from beginning of the shutdown.

  • PDF