• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.835-845
• /
• 1999

The objective of the present study was to investigate heat and mass transfer characteristics in a vertical falling film type absorber using LiBr-$H_2O$ solution with 6owt%. The experimental apparatus consisted of an absorber with inner diameter of 17.2 mm and length of 1150mm, a generator, an evaporator/condenser, a solution tank, a sampling trap etc. The parameters were solution temperature of 45 and $50^{\circ}C$, coolant temperature of 30 and $35^{\circ}C$, and film Reynolds numbers from 50 to 150. Pressure drop in the absorber increased as solution and coolant temperatures decreased. Pressure drop in the absorber increased up to the film Reynolds number of 90, and then decreased at the further increase of the Reynolds number above 90. The maximum absorption mass flux observed at the film Reynolds number of 90. Absorption mass flukes increased as coolant temperature decreased. Absorption mass fluxes and heat transfer coefficients under subcooled condition were larger than those under superheated condition. Heat transfer coefficients were affected by solution temperature more than coolant temperature. The maximum absorption effectiveness under the subcooled condition was 23% for coolant temperature of $30^{\circ}C$ and 31% for coolant temperature of $35^{\circ}C$ under the present experimental conditions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.319-324
• /
• 1999

This study is to investigate the properties on the load-deflection and fracture behaviors of the steel fiber reinforced concrete(SFRC) slab model specimens, Steel fibers of indent, crimp, and end hook shape were considered to reinforce the matrix under various mixing conditions and proportions. Initial cracking load, maximum load, and energy absorption capacity(load carrying capacity) of SFRC panel specimen increased with increase of steel fiber contents. And the plain concrete slab was fractured abruptly after maximum load but SRFC slabs were fractured smoothly by steel fibers in concrete matrix operated as cracking resistance force after maximum load. Indent, crimp and end hook shape steel fibers were effective in reinforcing the matrices but end hook type fiber were superior to indent and crimp type fibers.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.38-43
• /
• 2013

In order to design a wave energy generating system, a 6-DOF analysis technique is applied to CFD analysis on of a floating body and the behavior is interpreted according to the nature of the incoming waves. A spring constant is adopted to control the motion of multi floating bodies and to calculate the total average power absorption. Three cases of different wavelengths namely 20D, 30D and 40D have been modeled to analyze the total average power absorption. The average power absorption not only varies with the position of the floating body but also varies with wavelength. From the results obtained, it is concluded that the maximum total average power absorption is 9W approximately in wavelength 30D and the minimum total average power absorption is 4.3W approximately in wavelength 40D.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.151-162
• /
• 2012

Regarding experimental study on the dyeing properties of natural dye, I have dyed silk fabric with Styphnolobium japonicum, sappan wood, and indigo. The results of the experiment have been analysed by wavelength of maximum absorption, K/S and CIE Lab chromaticity co-ordinated. The results are as follows: In case of complex dyeing using Styphnolobium japonicum and sappan wood, dyeing with sappan wood, which is red related color, after dyeing with Styphnolobium japonicum, which is yellow related color, is more efficient. When dyeing was maden by complex of Styphnolobium japonicum and sappan wood, Dyeing method by the order of "Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$mordanting" made the best result of complex dyeing. In case of complex dyeing using Styphnolobium japonicum and Indigo, dyeing with Styphnolobium japonicum after the indigo made the best result. When dyeing with indigo first, and then Styphnolobium japonicum, yellow color was not well dyed, and low level of saturation caused lusterless color. Ordering of Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$indigo made the best result of complex dyeing in case of complex dying with Styphnolobium japonicum and indigo. Dyeing order, sappan wood first and then indigo last method shown 560~640 nm wavelength of maximum absorption which most color was blue related. In contrast, Indigo first and then sappan wood method shown 460~560nm wavelength of maximum absorption which color was red related. Complex dyeing with sappan wood and indigo was showing lusterless color. In case of dyeing with red and blue, dyeing with sappan wood and indigo was not appropriate.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.311-323
• /
• 2004

This paper is to study the energy absorption characteristics of CF/Epoxy(Carbon Fiber/Epoxy Resin) laminated shell with the various curvatures subjected to transverse impact loadings under the low impact velocity in consideration of design of structural members for use of transportation machine, which are consisted of the characteristics of high stiffness, strength and lightweight. The curvature radius are associated with the energy absorption characteristics of CF/Epoxy laminated shell which is brittleness material. In all tests, maximum load of CF/Epoxy laminated plate is higher than that of laminated shell with curvature, but maximum deflection is lower. And then absorbed energy of laminated shell with curvature is higher than laminated plate(curvature radius is unlimited), As curvature radius is increased, the absorbed energy is increased in laminated shell with curvature.

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.77-81
• /
• 1985

In this experiments the operation of the Geiger-Mueller tube is investigated by measuring the relationship between the count rate and the applied voltages, The length and slope of the plateau are characteristic of the tube. In our experiments, the average plateau length of the tube is extend for about 100 [V] and the slope 0.017 [%/V]. For normal counting purposes the working voltage is usually selected at value about 50 volts larger than the threshold of the plateau. To investigate the absorption of beta particles by matter. We performed an absorption experiments by using the Al absorber and Sr-90 ($0.125{\mu}Ci$) beta source. The maximum range of the beta radiation can be determined by visual extrapolation of the curve after subtraction of the constant background-rate and the maximum beta energy 2.09 [MeV] can be calculated from the range using an experimental relation.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.165-172
• /
• 2014

Novel super hydrophobic orange dyes having maximum absorption band at 450-500nm were synthesized to dye polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers, using 4-alkylanilines and ${\beta}$-naphthol. Their absorption spectra at visible range showed almost the same, which meant that the alkyl substituents introduced to chromophore did not affect on color appearance of the dyes. Considering both color strength and wash fastness, the decyl-substituted dye was determined as the optimum one practically. From the dyeing results at various conditions, the optimum dyeing was $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was also acceptable giving rating 3-4 for polypropylene fibers and rating 3 for ultra high molecular weight polyethylene fibers.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.677-682
• /
• 1999

Conjugated polycarbosilanes with diacetylene and aromatic groups of thiophene or phenylene simultaneously present in the polymer backbone such as poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(dimethylsilane)], poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(diphenylsilane)], poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(dimethylsilane)],and poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(diphenylsilane)] have been prepared. The characteristic C=C stretching frequencies appear at 2177-2179㎝-1 in the IR spectra of the polymers. The molecular weights of these polymers were detemined by GPC. All of these materials are soluble in organic solvents such as THF and chloroform, and thermally stable up to 200℃ in general without any weight loss under nitrogen. The prepared materials in THF solvent show a maximum absorption peak in the range of 334-356 nm with a molar absorptivity of 10³∼10ⁿ(n=5)L/(cm·mol) in the UV-visible absorption spectra. A maximum emission peak in the range of 403-550 nm is also observed in the fluorescence emission spectra. Both absorption and emission spectra strongly indicate that the obtained polycarbosilanes contain the new conjugated systems along the polymer main chain.

• Journal of electromagnetic engineering and science
• /
• v.19 no.2
• /
• pp.71-81
• /
• 2019

This paper presents a design methodology for wideband single-layered microwave absorbers with arbitrary absorption at the design center frequency using reactive Salisbury screens. The bandwidth of the absorber increases when the flatness of the reflection response at the design center frequency is maximized. Based on this observation, closed-form design formulas for wideband absorbers are derived. As they are scalable to any design frequency, wideband reactive screens can be systematically realized using two-dimensional periodic crossed-dipole structures patterned on a resistive sheet. Based on this method, a single-layered absorber with a 90% bandwidth improved to 124% of the design center frequency is presented. For the purpose of physical demonstration, an absorber with a design center frequency of 10 GHz is designed and fabricated using a silver nanowire resistive film with a surface resistance of 30 Ω/square. The measured absorption shows a good agreement with both the calculation and the electromagnetic simulation.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.2
• /
• pp.176-184
• /
• 1987

The purpose of this research is to study the characteristics of the coefficient of perform-ance (COP) of the small absorption refrigeration system. This experimental study is performed with two selected variables, the temperature of the generator and the input temperature of the cooling water. In order to determine the input temperature of the generator which gives maximum COP, the experimental data are obtained with controlling the temperature of the generator in the range of $20-32^{\circ}C$ of the temperature of the cooling water. The range of the generator heat suppling temperature which gives maximum efficiency is about $90-95^{\circ}C.$ The temperature range depends on the characteristics of the equipment unit. The most important result in this experiment is the trends of the COP in accordance with the variation of these temperatures. This trend will furnish the informations and knowledges for designing and operating the absorption refrigerator.