• Rapid Communication in Photoscience
• /
• v.2 no.1
• /
• pp.24-27
• /
• 2013

A polymeric photobase generator containing oxime-urethane groups is applied to a fluorescence micropatterning material. Polymer bearing oxime-urethane groups was prepared by copolymerization of methyl methacrylate with methacryloyloxyethyl benzophenoneoxime urethane (MBU). The reaction of amino groups in the irradiated copolymer film with dansyl chloride (Dns-Cl) was monitored by using UV absorption, IR absorption and fluorescence spectroscopy. The fluorescence spectrum of the Dns-Cl-treated irradiated copolymer film shows a strong fluorescence with a fluorescence maximum wavelength at 510 nm. A blue fluorescent micropattern with a line width of $2{\sim}3{\mu}m$ was obtained. Treatment of the irradiated copolymer film with Dns-Cl and rhodamine B mixture led to the formation of green, red, and orange-colored fluorescence micropatterns. Thus, various colored micropatterns on a single polymer film can be obtained by selective excitation of each dye molecules.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.223-228
• /
• 1997

In this study, bottom ash, lightweight aggregate, and Expanded Polystyrene was used to lighten the mortar. In order to compensate the reduction of strength caused by lightening, the waste foundry sand produced as solid waste was substituted for fine aggregate. As the device of reducing the ratio of absorption, the procedure of mixture was altered to check the effectiveness of surface coating of porous lightweight aggregate. It was observed over 170kg/$\textrm{cm}^2$ compressive strength at gravity about 1.3, an over 380kg/$\textrm{cm}^2$ at gravity about 1.7. the maximum strength was occurred when 30% of fine aggregate was replaced was replaced with waste foundry sand, and the ratio of absorption was decreased over 10% by changing the procedure of mixture.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.193-198
• /
• 1999

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of fatty acid. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about $130{\AA}^2$. MDCs were investigated in connection with monolayer compression cycles. It was found that the current pulses were generated over the entire range of molecular area, and the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. We investigated the change in absorption spectra of the fatty acid(8A5H) monolayer LB film due to cis-trans photoisomerization. It was found that the absorption spectrum of the 8A5H LB film was induce to photoisomerization by alternate irradiation with UV and visible light irradiation.

• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.15-19
• /
• 1997

The stability of monascin yellow pigment isolated from Monascus purpureus was determined over a period of storage for the wide range of pH, various metal ions and antioxidants. The absorption maximum of monascin pigment was 385 nm. Monascin pigment was more stable in acid solutions than in alkaline (pH 9 and pH 11) during storage period. It was also observed the reduction of absorption was occur after 3 days storage. The stability of monascin pigment was not changed by adding the various metal ions of the concentration of 10-4 M, however, it was unstable by adding the Zn2+, Al3+ and Fe3+ of 103- M concentration. The antioxidants. BHA, BHT, cysteine and L-ascorbic acid, have no effects on the stability of monascin yellow pigment. Thus, it may be concluded that the monascin pigment is stable and useful food additives as the natural colorant except for the alkaline food and food containing the Zn2+, Al3+ and Fe3+.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.156-163
• /
• 2016

The 6 novel super hydrophobic bluish-green dyes, showing the maximum absorption at 600~650nm, were synthesized to dye polyolefin fibers such as polypropylene and high strength polyethylene fibers. Their absorption spectra appeared almost the same at visible range, which meant the length of alkyl substituents did not affect on color appearance of the dyes. The optimum length of alkyl group was determined as hexyl substituents from the practical point of view. From the dyeing results, the optimum dyeing condition was $130^{\circ}C$ for 1 hour. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was obtained also good rating 4 for both fibers.

• YAKHAK HOEJI
• /
• v.25 no.3
• /
• pp.101-108
• /
• 1981

Quantitative determination of capsaicin in biological fluid was investigated. The pharmacokinetic study of capsaicin in rabbits was performed by high-pressure liquid chromatography, equipped with a microparticulate reversed-phase column and a fixed wavelength detector. Elution was carried out using methanolwater(70:30). It allows the quantitative determination at 8-400 ng level. When single dose of capsaicin(4mg/kg) was given to rabbits intravenously, the elimination phase was extremely short with average half-life to 17.35 minute. Urine excretion of capsaicin itself during first 2 hours after intravenous administration (4mg/kg) was 0.004-0.04% of the administered amount. The maximum plasma concentration of capsaicin after oral administration (300mg/kg) was $4{\times}10^{-7}$g/ml at 40 minutes. The $LD_{50}$ of capsaicin in mouse was 0.40mg/kg (i.v.) and 47.2 mg/kg (p.o.) which was determined by Litchfield and Wilcoxon's method, suggesting that the gastrointestinal absorption of capsaicin is poor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.651-654
• /
• 2009

Novel compounds with rod and disc mesogens were synthesized and characterized. The molecular structures were confirmed by FT-IR, $^1H$-NMR spectroscopy and elemental analysis. The optical properties of these molecules were investigated by UV-vis absorption spectroscopy and photo-luminescence spectroscopy. We found that they are a novel series of blue light-emitting molecules. The absorption spectra peaks of these compounds varied from 336 nm-341 nm, while the maximum emissions centered form 410 nm-450 nm in chloroform solution. However, unexpectedly we could not found their biaxiality and mesomorphic properties by POM, conoscopy and DSC method.

• Journal of the East Asian Society of Dietary Life
• /
• v.2 no.2
• /
• pp.277-282
• /
• 1992

This study was designedto investigate changes in phsicochemical properties of rice extrudate with added glycerin fatty acid ester extruded by single screw extruder. According to emulsifier content, expansion ratio and water solubility index were represented minimum in rice extrudate with added 2.0% and 2.5% glycerin fatty acid ester. Extrudate with added 1.5% emulsifier revealed lowest break strength and bulk density, so got a tender and light texture. Meanwhile water absorption index was showed maximum at 1.5% emulsifier content. As emulsifier content increased, lightness raised. By the microstructure obsorved with image analyzer, addition of emulsifier had decreased area and fractarea of air cells of cross section of extrudates. On the results of this research, quality of extrudate with added 1.5% glycerin fatty acid ester was considered very well than 100% rice extrudate, because of tender and light texture, highest water absorption indexand fine structure with higher lightness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.475-478
• /
• 2000

Maxwell displacement current(MDC) was generated when the area per molecule was about 140${\AA}$$^2$and 100${\AA}$$^2$. MDC were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N,N-dimethylacetamide(DMAc) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The precursor LB film was heated in a vacuum dry oven at 120$^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.401-406
• /
• 2004

In this experimentation, we investigated the characteristics of electromagnetic wave absorption of ferroxplana powder and silicone rubber composite. Ferroxplana was prepared by flux method at low temperature. The crystallization, magnetic properties and particle morphology of the obtained ferroxplana powder were investigated by using XRD, VSM and SEM. The particle size of ferroxplana powder was 2∼4$\mu\textrm{m}$ at the ratio of R=26, The coercivity and saturation magnetization of ferroxplana powder increased slightly with increase of temperature, The magnetic loss was the main factor of electromagnetic wave absorption of ferroxplana powder and silicone rubber composite, The maximum reflection loss of composite was about -l5dB below 4GHz.