• Trans-
• /
• v.16
• /
• pp.33-68
• /
• 2024

In a rapidly growing digital economic environment, NFT has emerged as a hot topic in the art field. However, in China, NFT art is developing slowly due to constraints related to China's political economy and socio-cultural situation. Due to strict management and control, the circulation of cryptocurrency is limited, and the level of public awareness and acceptance of NFT art and market maturity are still low. Despite these limitations, this paper predicts that Chinese art creators and market participants can build an online personal art IP model that suits the characteristics of the Chinese market and explores the current status and possibilities.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.12-19
• /
• 1999

CERES-rice, a rice growth simulation model, was used in conjunction with daily weather data to figure out the spatial variation of the phenology and yields of paddy rice at 168 rice cultivation zone units(CZU) of Kyunggi Province in 1997. Two sets of cultivar specific coefficients, which represent early and mid-season maturing varieties, were derived from field experiments conducted at two crop experiment stations. The minimum data set to run the model for each CZU (daily maximum and minimum temperature, solar irradiance, and rainfall) was obtained by spatial averaging of existing 'Digital Map of Korean Climate'(Shin et al., 1999). Soil characteristics and management information at each CZU were available from the Rural Development Administration. According to a preliminary test using 5 to 9 years field data, trends of the phasic development(heading and physiological maturity), which were obtained from the model adjusted for these coefficients, were in good agreement with the observed data. However, the simulated inter-annual variation was somewhat greater than the reported variation. Rough rice yields of the early maturing cultivar calculated by the model were comparable with the reported data in terms of both absolute value and inter -annual variation. But those of the mid season cultivar showed overestimation. After running the simulation model runs with 1997 weather data for 168 CZU's, rough rice yields of the 168 CZU's calculated by the model were aggregated into corresponding 33 counties by acreage-weighting to facilitate direct comparison with the reported statistics from the Ministry of Agriculture and Forestry. The simulation results were good at 22 out of the 26 counties with reportedly increasing yield trend with respect to the past 9 years average.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.327-334
• /
• 2004

In this paper, method for the determination of removal time of the side forms in high strength concrete are discussed using the estimation model of compressive strength development, the development of bond strength and rebound number of P type Schmidt hammer in order to review the validity of existing regulation as to side form removal and offer effective quality control method. According to the results, as W/B increases by $10\%$, the setting time is shortened by about 2 hours. In the scope of the paper, required time to gain 8MPa of compressive strength is determined about 17 ${\~}$20 hours of age and $21{\~}25^{\circ}D{\cdot}D$ of maturity. Bond strength between form and concrete shows the highest value around final setting time, but decreases drastically after that. Amount of concrete sticking on the form is large before setting completed, but after that, its amount shows decline tendency. The rebound value test with P type schmidt hammer can be started faster by 2${\~}$3 hours than compressive strength test. It is also confirmed that the removal of forms is possible when the rebound value of P type schmidt hammer is more than 32. It is found from the results that existing regulation regarding removal time of the side form of high strength concrete provided in KCI needs no revision because required time to gain the strength provided in KCI has no adverse effect on strength development at early age and surface condition during stripping the side form. Effective procedure to decide the removal time of side form can be performed by applying P type Schmidt hammer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1083-1094
• /
• 2016

Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity ($0.41{\pm}0.031$), while moderate heritability estimates were obtained for backfat thickness ($0.20{\pm}0.018$), longissimus muscle (LM) area ($0.23{\pm}0.020$), carcass weight ($0.28{\pm}0.019$), yield index ($0.20{\pm}0.018$), yield grade ($0.16{\pm}0.017$), marbling ($0.28{\pm}0.021$), texture ($0.14{\pm}0.016$), quality grade ($0.26{\pm}0.016$) and price/kg ($0.24{\pm}0.025$). Relatively low heritability estimates were observed for meat color ($0.06{\pm}0.013$) and fat color ($0.06{\pm}0.012$). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from -0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, -0.43, and -0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were -0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, -0.41, -0.79, and -0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and -0.73, respectively, with standard errors ranging from ${\pm}0.047$ to ${\pm}0.058$. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress.

• Journal of Animal Science and Technology
• /
• v.54 no.6
• /
• pp.395-400
• /
• 2012

This study was conducted to estimate the growth curve parameters for the body weight (BW) and body length (BL) of miniature pigs in Korea. Growth curve parameters were estimated through a nonlinear regression model using Gompertz, Logistic, and von Bertalanffy methods. A total of 25 piglets were measured monthly from birth up to 15 months of age to estimate both body weight and length. Results showed that the estimated average values for the body weight (body length) were 31.83 kg (58.77 cm) for the mature weight (A), 3.06 (1.74) for the growth ratio (${\beta}$), and 0.28 (0.52) for the maturing rate (${\kappa}$). Average inflection points showing maximum growth rate estimated each month for body weight were 3.97 kg and 11.70 cm, while for the body length were 1.06 kg and 21.61 cm. Moreover, the estimated maturation rates of the body weight and length for the group of Sire 1 were 0.22 and 0.40 respectively, whereas for the group of Sire 2 these values were 0.34 and 0.39. On the other hand, for the groups of Dam 1, Dam 2, and Dam 3, maturation rates for their body weights were 0.26, 0.28 and 0.33 respectively, while for their body lengths these values were 0.43, 0.37, and 0.38, respectively. The study also indicated a negative relationship between the values of mature weight and maturity rate for the body weight will result to a higher inflection point which is in contrast for the body length where results show that a positive relationship between the values of mature length and the maturity rate will result to a higher inflection point. Furthermore, the growth performance of miniature pig varies across stages but using these estimated growth curve parameters could improve the genetic traits of miniature pig.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.49-61
• /
• 2011

In recent, library is considered as an integrated knowledge convergence center that can respond to various requests about information service of users. Therefor it is necessary to establish a novel information system based on information communications technologies of the era. In other words, it is currently required to develop mobile information service available in portable devices such as smart phones or tablet PCs, and to establish information system reflecting cloud computing, SaaS, Annotation, and Library 2.0 etc. In this paper we design and implement a library information system using collective intelligence and cloud computing. This information system can be adapted for the varieties of mobile service paradigm and abruptly increasing amount of electronic materials. Advantages of this concept model are resource sharing, multi-tenant supporting, configuration, and meta-data supporting etc. In addition it can offer software on-demand type user services. In order to test the performance of our system, we perform an effectiveness analysis and TTA authentication test. The average response time corresponding to variance of data reveals 0.692 seconds which is very good performance in timing effectiveness point of view. And we detect maturity level-3 or 4 authentication in TTA tests such as SaaS maturity, performance, and application programs.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.119-125
• /
• 2013

The Recently many companies have tried to implement the Business Intelligence (BI) system to enhance the competitive edge in the rapid change of business environment. The BI system is implemented on the basis of current Management Information System, like Enterprise Resource Planning (ERP) system. For the successful implementation of BI system, many critical factors, like maturity and satisfaction level of current Information System, should be considered. The goal of this paper is to analyze which factors influence on the implementation intention of BI system, and how is the relationship among these factors. To achieve this goal, the empirical research has been carried out with factor analysis and Structural Equation Model (SEM). The result of this paper could be usefully referred in decision making process for the successful implementation of the BI system, and show the guideline to the management of the companies, which have the plan for the implementation of BI system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.131-139
• /
• 1985

Breeders have concerned with the nature of gene action controlling the duration of grain filling period to combine early maturity and acceptable grain yield to fit wheat into multiple cropping systems. The 4 x 4 complete diallel set of F$_1$, F$_2$ and 1/2 (BC$_1$ + BC$_2$) in crosses of winter and spring wheat cultivars was made to determine the nature of gene action involved for duration of grain filling period. Using the Jinks-Hayman model, no maternal effects were noted nor were any non-allelic interactions observed for total duration of grain filling and lag period. The actual grain filling period was influenced to some degree by such interactions. The spring cultivars Red Bobs and Siete Cerros also appeared to have more dominant genes for longer total duration of grain filling and lag period. In contrast, the winter parents Yamhill and Hyslop had more dominant genes for the longer actual grain filling period. The genes appeared to be independently distributed among the parents.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.2
• /
• pp.83-90
• /
• 2008

Two hundred and sixty Korean soybean landrace accessions were analyzed for polymorphism at 92 simple sequence repeat(SSR) loci. The 995 identified alleles served as raw data for estimating genetic diversity and population structure. The number of alleles at a locus ranged from three to 27 with a mean of 10.4 alleles per locus. $F_{ST}$ values estimated by analysis of molecular variance(AMOVA) using SSR data set were 0.018, 0.027, and 0.016 for usage, collection site and maturity groups, respectively, indicating little genetic differentiation. The model-based clustering analysis placed the accessions into three clusters(K=3) with 0.0503 of $F_{ST}$, indicating moderate genetic differentiation. Duncan's Multiple Range Test at K = 3 on the basis of 18 quantitative traits revealed that one cluster was mainly differentiated from the other two clusters by seed related traits and the other two clusters were differentiated from each other by biochemical traits. Genetic structure of Korean soybean landraces was differentiated by model-based clustering and supported by their phenotypic traits in part. This preliminary study could be the first step towards more efficient germplasm management and utilization of soybean landraces and helpful in association studies between genotypic and phenotypic traits in Korean soybean landraces.

• Journal of The Korean Association of Information Education
• /
• v.14 no.2
• /
• pp.273-283
• /
• 2010

Emergent process or behaviour can be seen in many places, from any multicellular biological organism to traffic patterns, cities or organizational phenomena in computer simulations. Similarly, the concept of 'Green IT' refers to the way complex systems and patterns arise inevitably among groups due to environmental concerns in real world. Green IT has good possibility to evolve as very chaotic system, in which the number of interactions between components increases geometrically with the number of components, thus potentially allowing for many new types of behaviour to emerge. However, when Green IT system regards as a complexity one, there exits some attractors to derive and control the system. In this context, this paper presents a new model based on type-2 fuzzy logic system to identify and assess the attractors of Green IT system which correspond to Reach-Richness matrix of Green IT.