• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.435-437
• /
• 2001

The change of the electricity charge from cost base to price base due to the introduction of the electricity market competition causes consumer to choose a variety of charge schemes and a portion of loads to be affected by this change. Besides, it is required the index that consolidate the price volatility experienced on the power exchange with gaming and strategic bidding by suppliers to increase profits. Therefore, in order to find a mathematical model of the sensitively-responding-to-price loads, the price-sensitive load model is needed. And the development of state-of-the-art technologies affects the electricity price, so the diffusion of high-efficient end-uses and these price affect load patterns. This paper shows the analysis on learning curves algorithms which is used to investigate the correlation of the end-uses' price and load patterns.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.41-46
• /
• 2002

In the face of global competition, the requirements fer the continuously increasing productivity, flexibility and quality (dimensional accuracy, mechanical properties and surface properties) have imposed a major change on steel manufacturing industries. The automation of hot rolling process requires the developments of several mathematical models for simulation and quantitative description of the industrial operations involved. To achieve this objectives, a new loaming method with neural network to improve the accuracy of rolling force prediction in hot rolling mill is developed. Also, Genetic Algorithm(GA) is applied to select the optimal structure of the neural network and compared with that of engineers experience. It is shown from this research that both structure selection methods can lead to similar results.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.37-39
• /
• 1998

The hybrid step motor has found applications in a wide range of mechanical systems as a low cost, open-loop positioning device. The step motor provides good stiffness at rest against disturbing load influences, a combination of moderate speed fine resolution, high reliability and simplicity. In recent years, considerable competition has arisen over the technological issue of wheather the device should be applied as a 2-Phase or 5-Phase machine. In this paper, to compare two systems, we have atempted to derive the mathematical. model, and analysed operating detent torque with this model. The analysis shows that a fundamental component of the permeance distribution produces the average torque and that harmonic components produce the ripple torque.

• Journal of applied mathematics & informatics
• /
• v.41 no.1
• /
• pp.11-31
• /
• 2023

The paper presents a critical analysis of selected topics related to the modeling of interacting species in which prey has nonlinear reproduction, which is in competition with predator. The mathematical model's stochastic stability is investigated. The method of designing appropriate Lyapunov functions is used to identify permanence conditions among the parameters of the model and conditions for the structure to no longer be extinct. The system's two-dimensional diffusive stability is regarded and studied. The system experiences the process of saddle-node bifurcation by varying the death rate of predator parameter. Further effects of parameters that undergo inherent oscillations are numerically investigated, revealing that as the intensity of predation parameter b is increased, the device encounters non-periodic and damped oscillations.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.1-9
• /
• 2012

Subterranean termites forage by constructing tunnel networks in soil and encounter food resources during tunnel excavation. Some species of termites can travel up to 150 m underground. They often travel to the surface to find wood cellulose to feed their colony, which in turn causes extensive damage to wooden architecture, such as timber-frame houses. This type of damage has been constantly increasing along with global warming because higher temperatures provide an ecological niche for termites. The damage is closely related to termite territory size and distribution. Recently, as a way to research termite control, the necessity of a mathematical model to simulate termite territory formation in relation to damage has increased. So far, however, few studies have been conducted on the development of a model because it is difficult to quantify or characterize the relationship between territorial behavior and field conditions including complicated environmental factors. In the present study, we suggest a simulation model of the territoriality of the Formosan subterranean termites, Coptotermes formosanus (Shiraki), and Reticulitermes flavipes (Kollar), based on empirical data. The model consists of 2 procedures. One describes tunnel network growth for each colony, and the other represents territoriality based on tunnel-tunnel interactions between different colonies. Using the model, we show changes in territorial competition according to the termination probability of tunnel growth.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.197-205
• /
• 2004

Batch test methods have developed for a long time to measure kinetic and stoichiometric parameters which are required to perform steady state design and mathematical modelling of activated sludge processes. However, at various So/Xo ratios, abnormal behaviors of ordinary heterotrophic organism in batch tests have been reported in many researches. Thus, in this research, abnormal behaviors of heterotrophs in batch tests were investigated at various So/Xo conditions by measuring and interpreting oxygen utilization rate. As So/Xo ratio increased, the calculated values of maximum specific growth rates, ${\mu}_{H,max}$ and $K_{MP,max}$, increased. However, at a certain point of So/Xo (around 10mgCOD/mgMLAVSS), ${\mu}_{H,max}$ and $K_{MP,max}$ values started to decrease. According to this observation, three prominent behaviours of heterotrophs were identified at various So/Xo conditions. (1) At low So/Xo region (below 5 mgCOD/mgMLAVSS), the oxygen utilization rate of heterotrophs in batch tests were almost stable and consequently yielded lower maximum specific growth rate. (2) At high So/Xo region (up to 5~10 mgCOD/mgMLAVSS), oxygen utilization rate incresed sharply with time and indicated more upward curvature than the predicted OUR with conventional activated sludge model, which consists of single hetetrotrophs group. Thus, in this region, competition model of two organisms, fast-grower and slow-grower, seemed to be appropriate. (3) At extremely high So/Xo region (over 10mgCOD/mgMLAVSS), significant oxygen utilization rate was still observed even after depletion of readily biodegradable COD. This might be caused by retarded utilization of intermediates which were generated by self inhibition mechanism in the process of RBCOD uptake.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.2
• /
• pp.183-191
• /
• 2023

Cryptographic algorithms require extensive computational resources and rely on complex mathematical principles for security. However, IoT devices have limited resources, leading to insufficient computing power. As a result, lightweight cryptography has emerged, which uses fewer computational resources. NIST organized a competition to standardize lightweight cryptography and TinyJAMBU, one of the algorithms in the competition, is a permutation-based algorithm that repeats many permutation operations. In this paper, we implement TinyJAMBU on an 8-bit AVR processor with a proposedtechnique that includes a reverse shift method and precomputing some operations in a fixed key and nonce environment. Our techniques showed a maximum performance improvement of 7.03 times in permutation operations and 5.87 times in the TinyJAMBU algorithm, improving up to 9.19 times in a fixed key and nonce environment.

• Journal of Wellness
• /
• v.14 no.2
• /
• pp.207-223
• /
• 2019

The purpose This study aimed at proposing class module elements for creativity and convergence and class models for creativity and convergence by integrating content elements by physical activity field(health, challenge, competition, ) for physical education and STEAM. For this, literature review, focus group interview(FGI) and discussions with experts were conducted, and the following study results have been drawn up: First, concerning the class module elements for creativity and convergence, total 11 class module elements in the health field were suggested including detecting risks by posture analysis and analyzing and designing amount of physical activity. Second, total 7 module elements in the challenge field were deduced such as anticipation of obstacles to target achievement and modeling of effective exercise. There were 17 convergence elements in the competition field including game record analysis and creation of game data storage application. Third, total 9 creativity and convergence module elements in the field include modeling of technology improvement for motion and symbolization for motion records. In addition, class modules related to convergence with engineering in the health field, convergence with technology in the challenge field, convergence with art in the competition field and convergence with art and mathematical symbols were proposed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.4
• /
• pp.8-15
• /
• 2004

Gilding process make thin membrane with other metals to surface of metal and metalloid. It control the hydrogen ion and oxalic acid density with rinsing work since the process used to acid and alkali. Therefore, in this study, several control method applied the gilding process. It desired to the optimal controller and their results can be save on water resource by useful feed of rinsing. And there is quite a possibility of uniform production due to fixed control of acid and alkali. Also it can be contributed the competition power because of lower production unit cost. Especially, this control method to be developed can be applied to any process without mathematical model. And it can be changed their algorithm more easily, if control object is changed.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.867-872
• /
• 2006

Fuel cells are devices that convert chemical energy directly into electrical energy. Owing to the high efficiency of the fuel cells, a large number of research work have been done during these years. Among many kinds of the fuel cells, a polymer electrolyte membrane fuel cell is such kind of thing which works under low temperature. Because of the specialty, it stimulated intense global R&D competition. Most of the major world automakers are racing to develop polymer electrolyte membrane fuel cell passenger vehicles. Unfortunately, there are still many problems to be solved in order to make them into the commercial use, such as the thermal and water management in working process of PEMFCs. To solve the difficulites facing the researcher, the analysis of the inner mechanism of PEMFC should be implemented as much as possible and mathematical modeling is an important tool for the research of the fuel cell especially with the combination of experiment. By regarding some of the assumptions and simplifications, using the finite element technique, a two-dimensional electrochemical mode is presented in this paper for the further comparison with experimental data. Based on the principals of the problem, the equations of electronic charge conservation equation, gas-phase continuity equation, and mass balance equation are used in calculating. Finally, modeling results indicate some of the phenomenon in a unit cell, and the relationships between potential and current density.