• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.453.1-453.1
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.109-112
• /
• 2003

Recently, CMP (Chemical mechanical polishing) technology has been widely used for global planarization of multi-level interconnection for ULSI applications. However, COO (cost of ownership) and COC (cost of consumables) were relatively increased because of expensive slurry. In this paper, we have studied the possibility of recycle of reused silica slurry in order to reduce the costs of CMP slurry. Also, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.47-62
• /
• 2018

This study examined recycled fashion design utilizing natural images for application to recent trends. This study is significant in that it presents the possibility of the development of recycled women's wear design by reflecting the characteristics and expressions of natural images and using denim material, which is the most common clothing material for everyday life. The results of this study are summarized as follows. First, five types of women's clothing was produced, pursuing a natural design with a soft and feminine silhouette. Second, the colors used were blue and white, which could represent nature. Third, as for materials, this study used clothing that was to be thrown away: four pairs of denim pants and two denim dresses. This study chose denim cloth, with its great value for reuse, because of the characteristics of the strong and durable fiber, because everyone has more than one article of clothing made from denim and because it can be easily sourced. Fourth, for textile motifs, this study expressed a peaceful natural scenery with tropical animals and plants. In addition, this study further emphasized natural images using transfer media printing. This study has significance in that it presented the possibility of recycled fashion design and expanded the range of utilization using transfer media printing, a dyeing treatment to reduce the environmental burden.

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.417-429
• /
• 2020

Waste glass is a global solid waste with huge reserves. The discarded waste glass has caused a series of problems such as resource waste and environmental pollution, so it is urgent to recycle waste glass with high replacement level. Glass powder (GP), as a supplementary cementitious material (SCM), used in cement-based materials has already become one of the important ways to recycle waste glass mainly attributed to its pozzolanic reaction and filling effect, especially to the suppressed ASR expansion. This paper demonstrates an overview of the properties of GP and its effect on the fresh and mechanical properties of cement-based materials. The study found that the influence of GP on the performance of cement-based materials mainly depends on its content, particle size, color and type, curing conditions, and other SCMs. Finally, based on the problems involved in the investigation of concrete containing GP, some corresponding suggestions and efforts are given to further guide the utilization of GP in cement-based materials.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.37-47
• /
• 2005

Global automobile manufacturers have made a lot of efforts to comply European Union (EU) end-of-life vehicles (ELVs) Directive. Hyundai and Kia have also made a lot of studies to eco-friendly treat our ELVs. Some results of studies have already reflected on our models to produce eco-friendly vehicles. This paper introduces our status of the recycle technology and our measures to respond to EU ELVs Directive.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.139-146
• /
• 1999

Combustion Characteristics of the wood chips(balsa chips) were experimental studied as fundamental investigation of the thermal recycle system of the urban dust. The urban dust contains plastics vegetable and lot of wood material. Then, a wood was chosen as an example of the component of urban dust. A small wood chip was burned in a electric furnace and mass reduction rate during volatile and combustion states were recorded by the micro-electric balance and the combustion flame shape took a photograph by video camera at the mass of wood chips and ambient temperature in the furance. Ignition delay took the minimum value when the mass of the test chip was 0.3g. When a mass of the test chip was smaller then 0.001g, combustion with flame did not burnt.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.48-58
• /
• 2007

For a sustainable development, the resources circulation system should be established and required alternative logistics area of enterprises. In this paper, we are to suggest a direction through analysis effects, and reduce, recycle, reuse factor of transportation, material handling, packing, information, management in logistics function, and effects of logistics organization on Firm Performance. We found significant correlations between the constructs extracted above, and between the constructs and firm's performance. This study was conducted with the subjects of manufacturing enterprises with concurrent reviews of literature and statistical analysis, and the meaning of this study would be the analysis of the influencers of the resources circulation system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1803-1806
• /
• 2008

Various efforts of reducing the green house gas in the whole industrial fields including railway industry have been implemented. Tilting train is the key example because it can run more faster on the existing rail than others due to its composite body. The system has an advantage of light weight but also a task to solve, recycling of composite material. To recycle the CFRP(Carbon Fiber Reinforced Plastic), there are two typical methods; chemical and thermal method. In this study, more environmentally friendly recycling method was recommended through the environmental function through comparing both recycling methods.

• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.76-80
• /
• 2003

There will be a big problem in disposing of waste tie coming from the cars. Because many of these have been thrown away to the field and environmentally polluted. New, We need to find out how to dispose or recycle these waste material. It is thought that recycling this material especially mixing with concrete will be a good idea. This study is focused how each material do its behavior due to the size of waste type particle and its amount into concrete material. 0.4mm-10mm range of particle has been applied to the material : Also, 1.0%, 1.5%, 2.0% range of tyre particle proportion has been applied to make cylinder molds. The concrete mold with waste-tyre particle has vibration-absorbing ability. It is found that 0.4 -0.6mm particle mixing concrete has been more solid organized. And this waste tyre material could be applied to the general concrete, it is found.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2013

This study was conducted to recycle fly ash containing an abundance of CaO generated from combustion in a circulating layer as a carbon storage medium. The study utilized XRD, TG-DTA and XRF analyses during the hydration of fly ash and identified calcium substances within fly ash that could be used in a carbonation process. $Ca^{2+}$ ions in the calcium substances were easily converted to hydrates. A carbonation experiment was done, which used the method of $CO_2$ gas injection to produce suspensions by mixing fly ash with distilled water. The results were analyzed using TG-DTA, XRD, and pH meter measurements. The study was able to verify that the reaction was completed at a $CO_2$ flow rate of 300cc/min approximately 30 minutes after an injection into a solution with a solid-liquid ratio of 1 : 10 of fly ash and distilled water. Moreover, the stirring time of the suspensions did not influence the reaction, and the reaction time was found to diminish as the portion of the fly ash became smaller. Thus, this study produced carbon storage fly ash having a $CO_2$ storage rate of about 71% through the utilization of the CaO content contained within fly ash.