• 자원리싸이클링
• /
• 제22권1호
• /
• pp.29-35
• /
• 2013

본 연구에서는 마찰하전정전선별을 적용하여 폐자동차 라디에이터의 Nylon을 회수하기 위한 재질분리 연구를 수행하였다. 시료(Nylon, PP glass)의 효율적인 재질분리를 위하여, 각각의 시료를 대상으로 다양한 하전재질에 따른 하전극성과 하전량을 faraday cage로 조사하였다. 그리고 시료를 분극할 수 있는 재질을 대상으로 기초 분리실험을 수행하여 하전재질을 선정하였다. 선정된 하전재질을 사용하여 연속처리가 가능한 마찰하전정전선별 장치를 개발하였으며, 다양한 조건별로 분리실험을 수행하여 시료의 회수 가능성을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.5-11
• /
• 2003

The number of the enterprises which utilize network technology has been increasing for solving problems such as productivity improvement, market trend analysis, and material collection for making decision. Especially, the management of equipment and the recovery time reduction when machines break down are very important factors in productivity improvement of the enterprise. Currently, most of the remote trouble diagnosis of equipment using the internet have just one function of transmitting the trouble information to the user. Therefore it does not directly reflect the user's recovery experience or the developer's new recovery methods. If the user's experienced recovery methods or the developer's recovery methods as well as the basic recovery methods are reflected online or on the internet, it makes it possible to recover faster than before. In this paper, we develop a Remote Monitoring Server (RMS) for chip mounters, and make it possible to reduce the recovery time by reflecting the user's experience and developer's new methods in addition to presenting the basic recovery methods. For this, trouble recovery concept will be defined. Based on this, many functions(trouble diagnosis, the presentation of the basic recovery methods, user's and developer's recovery method, counting function of the trouble number of each code, and presentation of usage number of each recovery methods) were developed. By utilizing the reports of the actual results of chip mounter and the notice function of the parts change time, the rate of operation of the chip mounter can be improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.386-387
• /
• 2006

This study is about the recycling technology of scrap a PCB(printed circuit board) produced in home appliances or automobile industry. And we develop the recycling technology of cooper (Cu)which is contained to leaching solution. In stead of electrolytic collecting in existing sulphuric atmosphere, we apply process using the ammonia solution which is used in economizing energy. So m the process of electrolyzing scrap a PCB through the leaching and separation, we examine the effect of the nickel contained to the solution and the cooper degree of purity which is changed according to current density.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.188-189
• /
• 2006

The flux-lock type superconducting fault current limiter (SFCL) has the attractive characteristics that can adjust the current limiting level by the turns ratio and the winding direction of two coils. To apply this type SFCL into power system, the analysis for the recovery characteristics of it together with the current limiting characteristic is needed. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. The recovery characteristics of the flux-lock type SFCL dependent on the winding direction of two coils were analyzed through the comparison with the resistive type SFCL.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.101-102
• /
• 2006

We investigated the characteristics of flux-lock type superconducting fault current limiter (SFCL) by the fault cycles. Since the recovery characteristics of a superconducting element in the flux-lock type SFCL were dependent on the winding' direction between two coils, the analysis for the recovery characteristics of this type SFCL together with the current limiting characteristic is necessary to apply it to power system. As the fault cycles was increased from 1 cycle to 5 cycles, the initial limiting current ($I_{ini}$) and quench characteristic were mostly same. As the fault period increases, the recovery time of the superconducting element increases. The consumed energy and recovery characteristics in a superconducting element show the same tendency.

• 복식
• /
• 제57권3호
• /
• pp.53-62
• /
• 2007

The purpose of this study was to investigate mechanical and comfort performances of the material for the improved working uniform for a volunteer fire brigade member, to get basic data for its evaluation and to help its material and design development. The results were as follows; The material of the newly developed working uniform was thinner and lighter than the material of the current used working uniform. It had better breathability, air permeability and heat transmission rate than the current one. It also had superior anti-flammability In all mechanical properties(tensile, bending, shearing, compression and surface properties), it showed better performances than the current one. It elongated and bended easier and more in both warp and weft directions. The elastic recovery and shape stability after elongation were also higher. The recovery and resistance to shearing and the resiliency and recovery after compression were also better than the current one. It was more flexible, softer and smoother in primary hand value, and was more suitable for the material for winter suit which needs softness and fullness in total hand value. The material of the improved working uniform showed lower thermal insulation value and higher evaporative resistance value compared to the material of the currently used working uniform from the sweating thermal manikin test. It was shown that the physical performances and the hand value of the textile material used in the newly developed working uniform for a volunteer fiber brigade member was improved compared to the one used in the currently used working uniform.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.515-523
• /
• 2003

Shape memory is physical phenomenon which a platically metal is restored to its original shape by a solid state phase change by heating. TiNi alloy the most effective material in the shape memory alloy(SMA). To study(measure) recovery stress of intelligent composite. Ti50-Ni50 shape memory matrix with prestrain SMA fiber. When SMA fiber of the intelligent composite is heated over austenite starting temperature(As) by electric heating. a recovery stress are generated. The recovery stress of the intelligent composite was measured by strain gage or photoelastic experiment. Measuring method of recovery stress by photoelastic experiment was developed in this research. It was certified that photoelastic experiment was more effective and more precise than strain gage method in the measurement of recovery stress.

• 대한화학회지
• /
• 제63권6호
• /
• pp.446-452
• /
• 2019

젖산을 이용하여 안전하게 양극활물질에 있는 Co, Mn, Ni을 침출할 수 있는 방법을 개발하였다. 양극활물질을 젖산으로 침출 시켰을 때, 젖산의 농도는 1N과 4 N 이상에서 보다는 2 N에서 가장 높은 효율을 보였다. 양극활물질을 단계적으로 젖산 용액에 첨가 하였을 때, 최대 용해도는 2 N의 젖산 용액에서 1 L 당 30 g이었다. 젖산 용액에 옥살산을 첨가하였고 희유금속들은 1 L 당 4 g에서 가장 경제적인 회수율을 보였다. 본 연구를 바탕으로 해서, 양극활물질로부터 희유금속들을 회수하기 위한 최적의 조건은 무게비로 옥살산과 양극활물질이 7 : 1이라는 것을 확인할 수 있었다. 첨가하여, 옥살산에 의해서 생성된 침전물은 Co, Ni, Mn 3성분이 결합되어 있는 다핵 결정성 물질이었다.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.3-15
• /
• 2009

녹색성장 정책의 핵심 단위 과제인 "온실가스 저감"과 "자원순환형 사회" 구축을 위해서는 폐기물 에너지회수와 물질재활용을 상호 보완적이고 균형적으로 실천하는 것이 중요하다고 할 것이다. 이에 본 연구는 과거 우리나라의 외국의 관련정책, "제4차 자원재활용 기본계획"과 "폐기물에너지화 종합대책"을 살펴보고 바람직한 자원재활용정책방향을 모색해 보았다. 그 결과 우리나라의 폐기물관리정책은 선진외국과 큰 차이가 없었으나 독일은 에너지회수를 중요하게 고려하고 고도 전처리를 의무화 하고 있는 점이 달랐으며, 우리나라의 여건은 과거보다 재찰용이 더욱 어려워질 것으로 판단되었다. "제4차 자원재활용 기본계획"에서는 필름류가 실질적이고 지속가능한 재활용이 되지 않고 있는 점을 알 수 있었으며, "폐기물에너지화" 종합대책에서는 RDF/RPF 에너지 회수가 일반소각 발전과 물질재활용에 비하여 효율성이 낮음을 알수 있었다. 이러한 문제를 해결하기 위해서는 에너지 및 폐열 회수는 에너지 회수(Recovery)로 개념 정립을 하며 전 과정평가(LCA: Life Cycle Assessment) 체계를 구축하는 등 제도적인 정비와 함께 필름류 합성수지를 용해하여 분자합성수지를 추출하는 기술 등의 기술개발도 필요함을 알수 있었다.

• 대한치과보철학회지
• /
• 제43권6호
• /
• pp.717-726
• /
• 2005

Statement of problem. One of the common problems of provisional crown and fixed partial denture materials is that when they are subjected to constant loads for a long period of time, they exhibit a dimensional change (creep). Purpose. The aim of this study was to investigate the viscoelastic behaviour of polymer-based provisional crown and fixed partial denture materials with time at constant compressive load. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Temphase, Luxatemp) and one monomethacrylate-based material (Trim) were selected. Dimensional changes of the specimens were recorded by a LVDT to evaluate their viscoelastic behavior and creep strain. For all specimens, two loading procedures were used. At first, static compressive stress of 4 MPa was applied for 30 minutes and followed by 1 hour of strain recovery. Then, after 24 hours of water storage, the specimens were loaded again. The creep values between materials were statistically analyzed using one-way ANOVA and multiple comparison $Scheff\acute{e}$ test. Independent samples t-test was also used to identify the difference of creep strain between first and secondary loading conditions at the significance level of 0.05. Results. Following application of the first loading, Trim showed the highest maximum creep strain (32.7%) followed by Luxatemp, Protemp 3 Garant and Temphase, with values of 3.78%, 2.86% and 1.77%, respectively. Trim was significantly different from other materials (P<0.05), while there were no significant differences among Luxatemp, Protemp 3 Garant and Temphase (P>0.05). The highest recovery and permanent set of Trim, were significantly different from those of others (P<0.05). At the secondary loading of the dimethacrylate-based materials, creep deformation, recovery and permanent set decreased and the percentage of recovery increased, while in Trim, all values of the measurements increased. This result showed that the secondary loading at 24 hours produced a significant creep magnitude. Conclusion. The dimethacrylate-based provisional crown and fixed partial denture materials showed significantly higher creep resistance and lower deformation than the monomethacrylate-based material. Thus, monomethacrylate-based materials should not be used in long-term stress-bearing situations.