• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.175-180
• /
• 2023

Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.152-160
• /
• 2024

In this study, ZnCo₂O₄ nanoparticles were synthesized via the coprecipitation method using different annealing temperatures from 200℃ to 800℃. By varying the treatment temperature, the morphology changed from amorphous to tetragonal, and finally to polygonal particles. As temperature increased, the sizes of the nanoparticles also changed from 5 nm at 200℃ to approximately 500 nm at 800℃. The fabricated material was used to modify the working electrode of a screen-printed carbon electrode (SPE), which was subsequently used to survey the detection performance of the antibiotic, chloramphenicol (CAP). The electrochemical results revealed that the material exhibits a good response to CAP. Further, the sample that annealed at 600℃ displayed the best performance, with a linear range of 1-300 μM, and a limit of detection (LOD) of 0.15 μM. The sensor modified with ZnCo₂O₄ also exhibited the potential for utilitarian application when the recovery in a real sample was above 97%.

• 자원리싸이클링
• /
• 제15권1호
• /
• pp.28-36
• /
• 2006

2004년 이후 EPR 제도의 시행과 더불어 폐플라스틱을 함유한 물질의 소각과 매립을 법으로 규제함에 따라 폐플라스틱 재활용의 필요성이 가중되고 있다. 본 연구는 생활계 폐플라스틱 재활용을 위한 정전선별 기술의 개발을 목적으로, 하전물질과 하전장치를 개발하여 선별효율을 높이고자 하였다. 따라서 우리는 대상 플라스틱의 하전효율과 재질분리에 적합한 하전장치 및 마찰하전형정전선별기를 개발하여 2종 혼합 플라스틱으로부터 PVC를 $99\%$ 이상 제거하였으며, PET와 같이 PVC 함량을 규제하는 경우 최적 실험조건에서 PET 회수율 $80\%$로 PVC를 $99.99\%$ 까지 제거할 수 있는 기술도 개발하였다. 또한 3종 혼합 플라스틱은 $98\%$이상으로 분리하여 플라스틱의 재활용을 높일 수 있는 재질분리 기술을 확립하였다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
• /
• pp.23-33
• /
• 2005

2004년 이후 EPR 제도의 시행과 더불어 폐플라스틱을 함유한 물질의 소각과 매립을 법으로 규제함에 함에 따라 폐플라스틱 재활용의 필요성이 가중되고 있다. 본 연구는 생활계 폐플라스틱 재활용을 위한 정전선별 기술개발로써, 하전물질과 하전장치 개발에 따라 선별효율을 높일 수 있다. 따라서 우리는 대상 플라스틱의 하전효율과 재질분리에 적합한 하전장치와 마찰하전형정전선별기 개발하여 2종 혼합 플라스틱으로부터 PVC를 99% 이상 제거하였으며, PET와 같이 PVC 함량을 규제하는 경우 최적 실험조건에서 PET 회수율 80%로 PVC를 99.99% 까지 제거할 수 있는 기술도 개발하였다. 또한 3종 혼합 플라스틱은 98%이상으로 분리하여 플라스틱의 재활용을 높일 수 있는 재질분리 기술을 확립하였다.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1904-1911
• /
• 1999

The most effective material in the shape memory alloy(SMA) is the TiNi alloy, because its shape recovery characteristics are very excellent. We molded the composite material with shape memory function. The fiber of it is $Ti_{50}-Ni_{50}$ shape memory alloy and matrix of it is epoxy resin(Araldite B41, Hardner HT903. Ciba Geigy), its adhesive and optical sensitivity are very excellent. It was assured that the composite material could be used as model material of photoelastic experiment for intelligent materials or structures. In this research, the composite material with shape memory function is used as model material of photoelastic experiment. Photoelastic experimental hybrid method is developed in this research, it is assured that it is useful on the obtaining stress intensity factor and the separation of stress components from only isochromatic data. The measuring method of stress intensity factor of intelligent material by photoelastic experiment is introduced. In the mode I state, we can know that stress intensity factors are decreased more than 50% of stress intensity factor of room temperature when temperature of fiber is greater than 4$0^{\circ}C$, prestrain greater than 5% and fiber volume ratio greater than 0.42% and that stress intensity factors are decreased by 100% when fiber volume ratio is greater than 0.84%, prestrain greater than 5% and temperature greater than 60 $^{\circ}C$.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.54-60
• /
• 2014

The purpose of this study is to examine whether cementitious powder separated from waste concrete can be used as an alternative raw material to limestone and reduce the usage of natural resource (limestone) and $CO_2$ emission based on recycling cementitious powder from waste concrete. Experiments actually analyzed the chemical composition of cementitious powder and performed hyperthermia analysis, measurement of free CaO and XRD analysis to measure the degree of recovery of hydration in the model of cementitious powder manufactured based on chemical composition. These were performed in each cementitious powder model at different calcination temperatures such as $900^{\circ}C$, $1200^{\circ}C$, $1300^{\circ}C$, $1400^{\circ}C$ and $1450^{\circ}C$. Through the experiments, it was found that the recovery of hydration was at a level which can be used as the alternative raw material for limestone, but the replacement ratio was directly affected by the degree of mixing of fine aggregate in less than $150{\mu}m$, which cannot be separated from cementitious powder. It was shown that there was no difference in the production of compounds involved in hydration at calcination temperatures of $1200^{\circ}C$ or higher. Therefore, to pursue the replacement of limestone and reduction of greenhouse gas by recycling cementitious powder, the development of technology to efficiently separate aggregate fine powder is required.

• KSBB Journal
• /
• 제25권3호
• /
• pp.205-214
• /
• 2010

역류크로마토그래피 (counter-current chromatography, CCC)는 일련의 분배과정을 한 개의 튜브 내에서 연속적으로 일어나도록 고안된 시스템으로서 컬럼으로는 polytetrafluoroethylene(PTFE) 튜브가 다층으로 감겨있는 원통형의 홀더 3개가 서로 기어를 통해 물려있으며, 홀더가 회전과 공전을 통해 튜브의 꼬임을 방지하는 rotary seal-free flow centrifuge 시스템으로 되어있다. 역상 HPLC (reverse phase HPLC)에서는 고정상이 실리카에 결합된 유기물단 (organic moiety)이 수용성 이동상 물질에 의해서 용매화 (solvated)되는 반면 CCC는 실리카 대신에 강한 중력장에 의해 분리되는 자유로운 용매가 고정상이 되며 이 고정상의 부피비율은 20-30%에 이른다. 즉 고체담체에 결합된 유기관능기 대신에 물과 섞이지 않는 hexane 같은 유기용제가 고정상으로 사용되는 것이다. 고속역류크로마토그래피 (high-performance countercurrent chromatography, HPCCC)는 CCC의 기능을 향상시킨 분리시스템으로서 높은 중력장하에서 높은 이동상 속도와 높은 분리효율과 짧은 분리시간을 특징으로 하고 있다. 특히 mg 단위에서 kg 단위로의 스케일업이 선형적으로 가능하다는 큰 장점을 지니고 있다. 이 총설에서는 현재까지 개발된 CCC의 일반적인 이론을 간략히 정리하고 최신 HPCCC 장비의 적용 예를 살펴보고 그 응용분야로서 생리활성물질의 분리 및 정제와 관련된 연구동향을 정리하였다.

• 한국치위생학회지
• /
• 제1권2호
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.162-167
• /
• 2013

X-선과, ${\gamma}$-선을 이용한 형광분석장치는 현재 널리 쓰이는 물질의 고유특성을 분석하는 장치이다. 하지만 여러 가지 원인으로 인해 장치사용 시 측정 신호에서 중첩 현상이 발생한다. 검출 신호의 높이는 측정 물질의 특성을 반영하며 측정 물질을 정확히 분석하기 위해서는 중첩된 신호를 제거하거나 복원을 해야 한다. 현재 trapezoidal 필터는 형광분석장치에 널리 사용되고 있으며 중첩펄스 검출에서도 좋은 결과를 보이고 있다. 본 논문에서는 측정 신호의 사다리꼴 변형에 기반 한 중첩펄스 처리방법을 제안한다. 제안방법은 사다리꼴 필터를 이용한 최대값 검출 알고리즘에 두 개의 카운터와 몇 개의 레지스터만을 추가하여 추가적인 중첩펄스 처리 알고리즘을 구현하기 때문에 기존 방법에 비해 하드웨어 복잡도가 훨씬 적으면서도 정확히 중첩펄스를 처리 할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.21-25
• /
• 2001

In this study, recovery of plasma etching· damage in PZT thin film with additive gas and re-annealing after etching have been investigated. The PZT thin films were etched as a function of $Cl_2/CF_4$ with addition of Ar and $O_2$ with inductively induced plasma. The etch rates of PZT thin films were 1450 $\AA$/min at 30% additive Ar into $(Cl_2(80%)+CF_4 (20%))$ and 1100 $\AA$/min at 10% additive $O_2$ into $C(Cl_2(80%)+CF_4(20%))$. In order to recovery properties of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures in at $O_2$ atmosphere. From the hysteresis curves, ferroelectrical properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed sample is consistent with the increase of the (100) and (200) PZT peaks revealed by x-ray diffraction (XRD). From x-ray photoelectron spectroscopy (XPS) analysis, intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of $Ti_xO_y$ is recovered by $O_2$ recombination during rapid thermal annealing process.