• 경영과학
• /
• 제10권2호
• /
• pp.43-59
• /
• 1993

A production control information system developed for multi-product, small-lot-sized production is presented. The system is composed of interrelated modules for production planning, shop floor control, and inventory/material management. The architecture of the system, functions of each module, and information processing procedures of each function are discussed.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2016년도 춘계학술논문요약집
• /
• pp.23-24
• /
• 2016

• 한국건축시공학회지
• /
• 제20권5호
• /
• pp.441-448
• /
• 2020

CLSM은 다량의 산업부산물 및 폐기물을 안전하게 유효 활용할 수 있는 슬러리계의 되메움 재료이다. 본 연구에서는 FA 및 모래의 대체 재료로써 GBFS 및 FNS, GF의 적용가능성을 평가함은 물론 나아가 도로 및 노면 하부, 싱크홀 및 포토홀 등의 되메움 및 공동충전재로서의 현장적용을 위한 품질기준을 제안하고자 하였다. 이를 통해 선진외국 대비 재생자원의 유효 재활용을 향상시킴은 물론 국내에서의 CLSM 확대적용 및 보급을 위한 기초적인 자료로 제안하고자 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.539-542
• /
• 1999

In this study, acrylate salt material of new chemical composition for injection grouting was prepared in the state of aqueous solution, and the chemical and physical properties of the material were investigated. The gelation time of the material was freely controllable through the control of added catalysts amount. As the viscosity of the material was very low (2∼3cps), its injection efficiency was expected to be very excellent. The variation of its viscosity plotted with the process of gelation revealed that the efficiency of its penetration into the ground soil was very excellent. The LD$\sub$50/ test on white mouse verified the toxicity of the material was very slight and substantially negligible. The grouting effect using the material was examined through field case histories.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.621-633
• /
• 2006

To reflect the size effect of material $(1\sim15{\mu}m)$ during plastic deformation of polycrystalline copper, a constitutive equation which includes the strain gradient plasticity theory and intrinsic material length model is coupled with the finite element analysis and applied to plane strain deformation problem. The method of least square has been used to calculate the strain gradient at each element during deformation and the effect of distributed force on the strain gradient is investigated as well. It shows when material size is less than the intrinsic material length $(1.54{\mu}m)$, its deformation behavior is quite different compared with that computed from the conventional plasticity. The generation of strain gradient is greatly suppressed, but it appears again as the material size increases. Results also reveal that the strain gradient leads to deformation hardening. The distributed force plays a role to amplify the strain gradient distribution.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.151-158
• /
• 2005

It is important to control material flow in shipbuilding as it decides the productivity of production, cost and period of production. The weight of material in a big shipyard is even more one million tons. The results contained in this paper can provide the valuable information on the effect of reduction of cost and competitive power. The intention of this paper is to let ship builders pay attention to material flow. This paper refers to other manufacture's methods to improve their material flow and also give one example to show how to pursue to improve material flow in a shop. We have still lots of room to improve material flow.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.243-251
• /
• 1998

These days material handling accidents and injuries are some of the most common in the workplace. 20-45% of all occupational injuries is taken place in the area of material handling industry. The control and management of material handling activities can have a significant impact on the workforce safety and productivity in the manufacturing industry. This paper is to suggest effective countermeasures for reducing and protecting occupational accidents in the area of material handling industry. To do so, firstly, we found out the relationship between occpational accidents and business. Secondly, we are to analyse overall occupational accidents caused by material handling tools. Thirdly, we found out important factors of occupational accidents and injuries in the area of material handling industry by analysing 10 cases in detail, which have been occured from 1994 to 1997 in the workplace.

• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.233-233
• /
• 2009

Piezoelectric Transformer (PT) was emerged in device and material industry. PT has some advantages such as low profile and mechanical energy transfer with little electromagnetic interface (EMI). But, It is known that the maximum PT efficiency can be obtained when it operates near the resonant frequency of the PT. Also PT's resonant frequency moves according to the load conditions Therefore, As the operating frequency moves further from the resonant frequency, the PT efficiency decreases dramatically due to the increase of the circulating current. This paper proposes analyzes modeling of PT convert and propose a guide-line to adaptive control

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.700-705
• /
• 2003

In this paper, an extended process model is proposed for the application of flexible belt grinding equipment as utilized in robotic grinding. The analytical and experimental results corresponding to grinding force, material removal rate (MRR) and contact area in the robotic grinding shows the difference between the conventional grinding and the flexible robotic grinding. The process model representing the relationship between the material removal and the normal force acting at the contact area has been applied to robotic programming and control. The application of the developed model in blade grinding demonstrates the effectiveness of proposed process model.