• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.683-692
• /
• 2019

Traditional damage detection methods for nonlinear structures are often based on simplified models, such as the mass-spring-damper and shear-building models, which are insufficient for predicting the vibration responses of a real structure. Conventional global nonlinear finite element model updating methods are computationally intensive and time consuming. Thus, they cannot be applied to practical structures. A decentralized approach for identifying the nonlinear material parameters is proposed in this study. With this technique, a structure is divided into several small zones on the basis of its structural configuration. The unknown material parameters and measured vibration responses are then divided into several subsets accordingly. The structural parameters of each subset are then updated using the vibration responses of the subset with the Newton-successive-over-relaxation (SOR) method. A reinforced concrete and steel frame structure subjected to earthquake loading is used to verify the effectiveness and accuracy of the proposed method. The parameters in the material constitutive model, such as compressive strength, initial tangent stiffness and yielding stress, are identified accurately and efficiently compared with the global nonlinear model updating approach.

• Advances in concrete construction
• /
• 제1권4호
• /
• pp.289-304
• /
• 2013

A reliable concrete constitutive material model is critical for an accurate numerical analysis simulation of reinforced concrete structures under extreme dynamic loadings including impact or blast. However, the formulation of concrete material model is challenging and entails numerous input parameters that must be obtained through experimentation. This paper presents a damage scale analytical model to characterize concrete material for its pre- and post-peak behavior. To formulate the damage scale model, statistical regression and finite element analysis models were developed leveraging twenty existing experimental data sets on concrete compressive strength. Subsequently, the proposed damage scale analytical model was implemented in the finite element analysis simulation of a reinforced concrete pier subjected to vehicle impact loading and the response were compared to available field test data to validate its accuracy. Field test and FEA results were in good agreement. The proposed analytical model was able to reliably predict the concrete behavior including its post-peak softening in the descending branch of the stress-strain curve. The proposed model also resulted in drastic reduction of number of input parameters required for LS-DYNA concrete material models.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.377-380
• /
• 2006

The recently developed confinement-shear lattice model is reviewed. The procedure for generating aggregates in a given specimen and the constitutive model for on aggregate-cement strut are shown. It is suggested that the model can easily be extended for early age concretes and fiber reinforced concretes. The state-of-art of the extension and the general procedure of the extension are given in this paper.

• 소성∙가공
• /
• 제31권2호
• /
• pp.81-88
• /
• 2022

Numerical analysis and dynamic material properties are required to analyze the behavior of workpiece during an electrohydraulic forming (EHF) process. In this study, EHF experiments were conducted under three conditions (6, 7, 8 kV). Dynamic material properties of Al 5052-H34 were inversely estimated through an ANN (Artificial Neural Network) model constructed based on LS-Dyna analysis results. Parameters of Cowper-Symonds constitutive equation, C and p, were used to implement dynamic material properties. By comparing experimental results of three conditions with ANN model results, optimized parameters were obtained. To determine the reliability of the derived parameters, experimental results, LS-Dyna analysis results, and ANN results of three conditions were compared using MSE and SMAPE. Valid parameters were obtained because values of indicators were within confidence intervals.

• 한국지반공학회논문집
• /
• 제22권2호
• /
• pp.41-53
• /
• 2006

텐서(tensor) 이론에 기초한 기존의 구성방정식 모델은 암석(rock)과 같은 준취성 재료에서 나타나는 복잡한 변형열화(strain softening) 과정을 기술하기가 어려우며, 특히 구속압에 따른 변형열화 과정의 변화를 잘 반영하지 못한다. 본 연구에서는 화강암의 3차원 거동을 예측 분석할 수 있는 구성방정식을 마이크로플레인 모델을 이용하여 개발하였다. 화강암에 대한 마이크로플레인 모델은 Westerly 화강암과 Bonnet 화강암의 일축압축 및 삼축압축 시험 데이터와 최적을 이루도록 개발되었다. 개발된 마이크로플레인 모델은 화강암의 일축 및 삼축거동을 잘 예측하였다. 그리고 개발된 화강암의 마이크로플레인 모델을 유한요소법에 적용하여 암석지반 굴착시의 발파 모사를 통해 화강암의 비선형 거동 및 발파시의 파쇄 영역을 해석하였다. 또한 마이크로플레인 모델을 이용한 비선형 해석결과와 탄성해석 결과를 비교 분석한 결과 화강암의 거동은 비선형에 크게 영향을 받는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.37-48
• /
• 2016

The hyperbolic stress-strain model has been shown to be valid for modeling nonlinear stress-strain behavior for rockfill materials. The Duncan-Chang nonlinear constitutive model was adopted to characterize the behavior of the modeled rockfill materials in this study. Accurately estimating the model parameters of rockfill materials is a key problem for simulating dam deformations during both the dam construction period and the dam operation period. In order to estimate model parameters, triaxial compression experiments of rockfill materials were performed. Based on a genetic algorithm, the constitutive model parameters of the rockfill material were determined from the triaxial compression experimental data. The investigation results show that the predicted strains provide satisfactory precision when compared with the observed strains and the strains forecasted by a gradient-based optimization algorithm. The effectiveness of the proposed inversion procedure of model parameters was verified by experimental investigation in a laboratory.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.253-265
• /
• 1993

본 연구는 Lade에 의해서 제안된 비선형구성모델을 이용하여 지반거동을 해석하기 위한 수치해석 방법을 제시하고자 한것이다. 그 첫 시도로서 축대칭조건과 평면변형율조건의 비선형 경계치 문제를 해석하기 위하여 변위법을 이용한 유한요소 프로그램을 개발하였다. 모델의 매개변수를 결정하기 위한 시험과 모형기초지반의 시험재료는 백마강모래를 사용하였다. 그리고 실내시험 자료로 부터 비선형구성모델 의 매개변수를 결정할 때 컴퓨터 프로그램을 개발하여 사용하였다. 구성 모델의 정도를 검증하기 위하여 개발된 유한요소프로그램을 사용한 예측결과를 매개변수 결정에 사용된 실험 결과뿐만 아니라 결정에 사용되지 아니한 실험결과와도 비교하였다. 검증에 사용된 시험은 다음과 같다 ; (1) 등방압축팽창시험, (2) 구속압력을 달리한 배수삼축압축시험 (3) 모형기초지반의 재하시험, 이상의 시험과 수치해석결과를 비교하여 비선형구성모델과 유한요소해석프로그램의 정도를 확인하고 평면변형율조건에 있는 2차원모형기초지반의 거동 특성을 검토하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1995

The behavior of the work materials in the chip-tool interface in extremely high strain rates and temperatures is more that of viscous liquids than that of normal solid metals. In these circumstances the principles of fluid mechanics can be invoked to describe the metal flow in the neighborhood of the cutting edge. In the present paper an Eulerian finite element model is presented that simulates metal flow in the vicinity of the cutting edge when machining a low carbon steel with carbide cutting tool. The work material is assumed to obey visco-plastic (Bingham solid) constitutive law and Von Mises criterion. Heat generation is included in the model, assuming adiabatic conditions within each element. the mechanical and thermal properties of the work material are accepted to vary with the temperature. The model is based on the virtual work-stream function formulation, emphasis is given on analyzing the formation of the stagnant metal zone ahead of the cutting edge. The model predicts flow field characteristics such as material velocity effective stress and strain-rate distributions as well as built-up layer configuration

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1560-1576
• /
• 2018

With the aim to provide an efficient platform for the elastic-plastic analysis of steel structures, reinforced concrete (RC) structures and steel-concrete composite structures, a program iFiberLUT based on the fiber model was developed within the framework of ABAQUS. This program contains an ABAQUS Fiber Generator which can automatically divide the beam and column cross sections into fiber sections, and a material library which includes several concrete and steel uniaxial material models. The range of applications of iFiberLUT is introduced and its feasibility is verified through previously reported test data of individual structural members as well as planar steel frames, RC frames and composite frames subjected to various loadings. The simulation results indicate that the developed program is able to achieve high calculation accuracy and favorable convergence within a wide range of applications.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.37-48
• /
• 2004

본 연구에서는 사질토의 취성적 응력-변형률 관계와 전단시 체적팽창을 고려할 수 있는 구성모델에 대한 연구를 수행하였다. 제안된 모델은 일반등방경화규칙에 의거한 비등방 경화규칙을 적용하였으며, 미소변형에서 대변형에 이르는 전체변형률 영역의 거동을 모델할 수 있도록 적합한 경화함수를 이용하였다. 항복면의 형태는 응력공간에서 원통형으로 나타나는 단순한 형태로 실용적으로 적용하기 편리하도록 하였다. 또한 유동규칙을 단순화하여 소성 체적 변형률을 팽창률을 이용하여 정의하였다. 이로 인하여 사질토에서 나타나는 전단시 팽창을 모델하는 것이 가능하였다. 또한 가상적인 첨두응력비를 정의하여 취성적 응력-변형률 관계를 모델하는 것이 가능하였다. 이 때 제안된 모델의 계수를 체계적으로 결정하기 위하여 실수형 유전자 알고리즘이 적용된 최적화 기법이 적용되었다. 이를 통하여 구성 모델에 필요한 계수를 결정할 수 있었다. 제안된 모델을 검증하기 위하여 풍화토시료에 대한 $K_0$ 압밀 삼축시험을 수행하였다. 이러한 시험결과를 제안된 모델과 비교한 결과 $K_0$ 압밀 시험에서 나타나는 취성적 응력-변형률 관계 및 체적의 팽창과 같은 실제 유효응력 거동을 합리적으로 모델하는 것이 가능하였다.