• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.145-151
• /
• 2004

According to the development of the aircraft industry, the fatigue strength of Aluminum Alloy becomes a great important material, but it seems that we don't understand an effect on the crack growth behaviour very well. This thesis is not only studied about the five kinds of 2017-T3, 2023-T3, 5083-0, 7075-T6, 7N01-T6 among the Aluminum Alloy which are the main materials of the aircraft, but also small or large relations against the fatigue strength of them. The consequence of the research was being progressed the accordance with the order. That is, The order is 2024-T3> 2017-T3> 7N01-T6> 7075-T6> 5083-0. These inclusion came out the acceleration phenomena in the crack growth behaviour among the high ${\Delta}K$ section Nevertheless I figured out their effects were being ignored at the 2b step.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.5-10
• /
• 2006

This paper investigates cutting qualities after laser dicing and predicts the problems that can be generated by laser dicing. And through 3 point bending test, die strength is measured and the die strength after laser dicing is compared with the die strength after mechanical sawing. Laser dicing is chiefly considered as an alternative to overcome the defects of mechanical sawing such as chipping on the surface and crack on the back side. Laser micromachining is based on the thermal ablation and evaporation mechanism. As a result of laser dicing experiments, debris on the surface of wafer is observed. To eliminate the debris and protect the surface, an experiment is done using a water soluble coating material and ultrasonic. The consequence is that most of debris is removed. But there are some residues around the cutting line. Unlike mechanical sawing, chipping on the surface and crack on the back side is not observed. The cross section of cutting line by laser dicing is rough as compared with that by mechanical sawing. But micro crack can not be seen. Micro crack reduces die strength. To measure this, 3 point bending test is done. The die strength after laser dicing decreases to a half of the die strength after mechanical sawing. This means that die cracking during package assembly can occur.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.554-563
• /
• 2009

The trend of current urban redevelopment and new city development project shows that the superstructure of building is getting larger and higher in consequence of a limited plottage condition. For this reason, it is definitely required to extend pile diameter and install more deep foundation(Mega foundation) to support superstructure. The existing precast pile construction method causes construction-related problems such as increasing quantities, difficulty of storage & transportation material and decreasing design load while construct pile in deep foundation. The drilled shaft method has applied to minimize those problems. This article will be presented construction case study of design & construction of R.C.D method for a large building foundation work on the inside and outside of the country.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.156-161
• /
• 2015

In this paper, we present simulation results obtained using SILVACO TCAD tools for a 3-D silicon on insulator (SOI) n-FinFET structure with a gate length of 8 nm at 300K. The effects of variations of the device’s key electrical parameters, such as threshold voltage, subthreshold slope, transconductance, drain induced barrier lowering, oncurrent, leakage current and on/off current ratio are presented and analyzed. We will also describe some simulation results related to the influence of the gate work function variations on the considered structure. These variations have a direct impact on the electrical device characteristics. The results show that the threshold voltage decreases when we reduce the gate metal work function Φ_m. As a consequence, the behavior of the leakage current improves with increased Φ_m. Therefore, the short channel effects in real 3-D FinFET structures can reasonably be controlled and improved by proper adjustment of the gate metal work function.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.1-7
• /
• 2011

The stocker system is another name of automated storage and retrieval system (AS/RS) and being popularly used as main material handling tools in Liquid Crystal Display (LCD) and semiconductor fabrication facilities. Recently the use of the stocker system has been extended to transportation from conventional storage and retrieval in LCD fabrication facilities. Toolsets are connected in the ground level of the stocker system and 4~6 stories of the shelves are placed in the upper or lower ground level. As a consequence of the more sophisticated design, move requests imposed on the system greatly increased. For solving this problem, the industry adopted the dual-robot stocker system that two robots are moving along the same guide line in the stocker system. This research develops a closed-form solution to estimate a delivery rate of the dual robot stocker system under given design and operation parameters. Using this stochastic model, industry practitioners could analyze performance levels under given various design parameters, and ultimately the model helps optimizing the design parameters.

• 한국식생활문화학회지
• /
• 제8권2호
• /
• pp.125-137
• /
• 1993

The purpose of this study was to develop nutrition education program that promotes eating behavior of preschool children. 118 parents of preschool children were surveyed to understand of children's food preferences and prejudices. The preference for vegetable showed the lowest score(2.345) and fruit was the favorite food(4.11). These results imply the consequence of teaching balanced diet with emphasizing vegetables for preschoolers. Thus, nutrition education program including teaching material were developed to provide the preschoolers with cognitive, affective, and psychomotor activities in order them to the familiar with vegetables. The program were consisted of following five parts: 1. Read-A-Story includes six stories with follow-up activities. 2. Grow-A-Plant gives instructions for growing vegetables. 3. Play-A-Game stimulates children's imagination and learning. 4. Take-A-Trip suggests places to visit that grow, sell, and prepare vegetables. 5. Eat-A-Treat presents easy ways to prepare and enjoy vegetables. Twenty one-Standardized recipes for vegetable dishes were also developed for preschooler's luncheon and snack in daycare center.

• 한국실내디자인학회논문집
• /
• 제26권1호
• /
• pp.3-12
• /
• 2017

In today's society, Monolithic expresses itself as a single featured work with a consistent exterior in the urban environment. In particular, such characteristics of the monolithic work have become increasingly influential in the modern society with the emergence of the minimalism. Monolithic architecture in modern has common feature which is maintaining simple construction format (Mass) with complicated and abundance space (Volume) inside. This simple architecture exterior leads new stimulus which is different from previous format and evokes unique sensibility and thoughts with monumental expressing. Uniformed exterior revealed thru purity of material builds up strong presence by itself. In contract with simple exterior, diverse space is expressed by consistent concept and process. Through this, it shows creating metaphorical space and space-oriented feature. We can interpret modern monolithic architecture as a sensation and alternative against Gestalt architecture in consequence of chasing clarity, visual stimulus and uncertain tendency only. It provides architectural experience by spatial imaginary and unexpected space development to users through exclusivetendency against outside and stressing un-private, we can evaluate its value as a space-oriented construction which helped us to think about space meaning in modern society.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1215-1219
• /
• 2007

이 논문에서는 폴리프로필렌/열방성 액정고분자 블렌드에 관한 연구 결과를 나타냈다. 기존의 연구에서 주로 쓰인 액정고분자 (Thermotropic Liquid Crystalline Polymer, TLCP)는 용융점이 대부분 270o0 이상으로 가공은 적어도 300oC 이상에서 가능하기 때문에, PP와의 블렌드 시 PP의 열분해를 피할 수 없다. 이 때문에 원하는 정도의 물성을 얻기 위해서는 과량의 TLCP를 첨가하여야 한다. 이 연구에서 고온용 TLCP 대신 융점이 220oC 정도 되는 새로운 TLCP를 사용하여 블렌드를 제조하였고, 그 특성을 관찰하였다. 연구 결과 기존 PP/TLCP 블렌드와 비교해 동등 이상의 물성을 보임을 관찰할 수 있었고, 이로서 새로운 저온용 TLCP가 PP의 강화제로 사용될 수 있음을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1329-1337
• /
• 2005

The OLED (Organic Light Emitting Diodes) display recently used for the information indicating device has many advantages over the LCD (Liquid Crystal Display), and its demand will be increased highly. The linear cell should be designed carefully considering the uniformity of thin film on the substrate. Its design needs to compute the temperature field analytically because the uniformity for the thin film thickness depends on the temperature distribution of the source (organic material). In the present study, the design of the linear cell will be modified or improved on the basis of the temperature profiles obtained for the simplified linear cell. The temperature distributions are numerically calculated through the STAR-CD program, and the grids are generated by means of the ICEM CFD program. As the results of the simplified linear cell, the temperature deviation was shown in the parabolic form among the both ends and the center of the source. In order to reduce the temperature deviation, the configuration of the rectangular ends of the crucible was modified to the circular type. In consequence, the uniform temperature is maintained in the range of about 90 percent length of the source. It is expected that the present methods and results on the temperature analysis can be very useful to manufacture the vapor deposition device.

• Steel and Composite Structures
• /
• 제24권6호
• /
• pp.727-740
• /
• 2017

The present paper studies the stability analysis of the continuously graded CNT-Reinforced Composite (CNTRC) panel stiffened by rings and stringers. The Stiffened Panel (SP) subjected to axial and lateral loads is reinforced by agglomerated CNTs smoothly graded through the thickness. A two-parameter Eshelby-Mori-Tanaka (EMT) model is adopted to derive the effective material moduli of the CNTRC. The stability equations of the CNRTC SP are obtained by means of the adjacent equilibrium criterion. Notwithstanding most available literature in which the stiffener effects were smeared out over the respective stiffener spacing, in the present work, the stiffeners are modeled as Euler-Bernoulli beams. The Generalized Differential Quadrature Method (GDQM) is employed to discretize the stability equations. A numerical study is performed to investigate the influences of different types of parameters involved on the critical buckling of the SP reinforced by agglomerated CNTs. The results achieved reveal that continuously distributing of CNTs adjacent to the inner and outer panel's surface results in improving the stiffness of the SP and, as a consequence, inclining the critical buckling load. Furthermore, it has been concluded that the decline rate of buckling load intensity factor owing to the increase of the panel angle is significantly more sensible for the smaller values of panel angle.