• Proceedings of the Korean Statistical Society Conference
• /
• 2003.10a
• /
• pp.319-324
• /
• 2003

본 논문에서는 matched-pair design에서의 두 처리간 동등성/ 비열등성 검정에 대해 고려하였다. 기존에 비율차이나 risk ratio관점에서 동등성/비열등성 검정을 시행한 것과는 달리, 본 논문에서는 odds ratio에 기초하여 두 가지 검정통계량을 유도하였다. (1) constrained maximum likelihood estimator(mle)를 이용한 fieller type 통계량 (2) 제약없이 구한 mle를 사용한 wald-type 통계량). 비율 차이나 risk ratio에 기초한 기존의 통계적 방법들(비율차이에 근거한 (3) score-type 통계량과 (4) wald-type 통계량, risk ratio에 기초한 (5) fieller-type 통계량과 (6) wald-type 통계량)과 본 논문에서 제시한 두가지 통계량의 성능을 비교하기 위해 모의실험을 시행하였다. 모의실험 결과, 본 논문에서 제안한 constrained mle를 사용한 fieller type 통계량은 empirical type I error 측면에서 매우 만족스러운 결과를 보이고 있으며, 특히 비대각 셀의 확률이 작아질 경우에도 안정적인 성능을 보여준다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.138-145
• /
• 1995

The offset voltage in silicon Hall plates is mainly caused by stress and strain in package, and by alignment in process. The offset voltage is appeared random for condition change with time in the factory, is non-linearly changed with temperature. In this paper proposed new method of design of Hall IC, and methematicaly proved relation layout of chip of 90$^{\circ}$-shift-current Hall plate pair is matched with "Differentail to single ended Conversion amplifier." In the experiment, the offset voltage is reduced about 1/100 time than the original offset voltage.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.120-124
• /
• 2022

With advancements in underwater stealth technology for naval vessels, new sensor configurations for detecting targets have been attracting increased attention. Latest underwater mines adopt multiple sensor configurations that include electric field sensors to detect targets and to help acquire accurate ignition time. An underwater electric field sensor consists of a pair of electrodes, signal processing unit, and preamplifier. For detecting underwater electric fields, the preamplifier requires low-noise amplification at ultra-low frequency bands. In this paper, the specific requirements for low-noise preamplifiers are discussed along with the experimental results of various setups of matched transistors and chopper stabilized operational amplifiers. The results showed that noise characteristics at ultra-low frequency bands were affected significantly by the voltage noise density of the chopper amplifier and the number of matched transistors used for differential amplification. The fabricated preamplifier was operated within normal design parameters, which was verified by testing its gain, phase, and linearity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.667-670
• /
• 2010

In this paper, a high voltage current sensing circuit for boost converter is designed and verified by Cadence SPECTRE simulations. The current mirror pair, power and sensing metal-oxide semiconductor field effect transistors (MOSFETs) with size ratio of K, is used in our on-chip current sensing circuit. Very low drain voltages of the current mirror pair should be matched to give accurate current sensing, so a folded-cascode opamp with a PMOS input pair is used in our design. A high voltage high side lateral-diffused MOS transistor (LDMOST) switch is used between the current sensing circuit and power MOSFET to protect the current sensing circuit from the high output voltage. Simulation results using 0.35 ${\mu}m$ BCD process show that current sensing is accurate and the pulse frequency modulation (PFM) boost converter using the proposed current sensing circuit satisfies with the specifications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.14-14
• /
• 2010

A high voltage current sensing circuit for LED driver IC is designed and verfied by Cadence SPECTRE simulations. The current mirror pair, power and sensing MOSFETs with size ratio of K, is used in our on-chip current sensing circuit. Very low drain voltages of the current mirror pair should be matched to give accurate current sensing, so a folded-cascode opamp with a PMOS input pair is used in our design. A high voltage high side LDMOST switch is used between the current sensing circuit and power MOSFET to protect the current sensing circuit from the high output voltage. Simulation results using 0.35um BCD process show that current sensing is accurate with properly frequency compensated opamp.

• Journal of Engineering Education Research
• /
• v.25 no.5
• /
• pp.68-74
• /
• 2022

The purpose of this study was to develop an infographic-based STEAM program for high school students and test its effectiveness. In this study, we converged high school 'art' education with 'Korean language' and 'mathematics.' The program was divided into four phases. The effectiveness of the program was analyzed by conducting matched pair t-test for 377 students at a girl's high school in Seoul before and after the program. The study found that the students' self-concept on mathematics and their attitude towards choosing science and engineering career showed significant increases after the program. By connecting high school courses through data visualization based on cognitive information design, findings from this study suggest that our infographic-based STEAM program should be implemented more frequently at high schools.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.51-61
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes.. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the second one of the two companion papers, describes the similarity assessment method using NFD.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the first one of the two companion papers, describes the similarity assessment methods using convex decomposition and FFD.

• The Journal of Korean Academy of Sensory Integration
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2012

Objective : The purpose of this study was to investigate the effects of group sensory integrative intervention on the sensory integration dysfunction children's social interaction with peer and therapist Methods : The subjects were three children aged between 3 and 5 with sensory integration disorder. Each Child participated in 15 sessions of group sensory integrative intervention. The based on the observation list of the children's social interaction behavior, the children's interactions with the peers and therapist are measured. One group pretest-posttest design was used to verify the effect of group sensory integrative intervention. The difference between before and after the sensory integration group program in the observation list of the children's social interaction behavior were tested by the Wilcoxon matched-pair signed rank test. Results : The average scores of the observation list of the children's social interaction behavior was increased after the group sensory integrative intervention. However, there is no significant difference in the social interactions between data of pre-intervention and the one of post-intervention. Conclusion : The results suggest a possibility of that the group sensory integrative intervention may affect social interactions. Future research should supplement limitations of this study regarding the short period of the experiment and there must be several evaluation standard to show norm data.

• The Journal of Korean Academy of Sensory Integration
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2009

Objective : This study is to verify effect of a sensory integration (SI) intervention on sensory processing of children with sensory modulation disorder (SMD), and to explore how the SI intervention affect play, socialization, occupational performance and occupational satisfaction of those children. Method : Five children with developmental disabilities living in metropolitan were diagnosed as SMD by the Sensory History Interview (SHI) and Short Sensory Profile (SSP). The SMD children undergone the 48 sessions of 50 min intervention twice in a week for six months and took the Revised Knox Preschool Play Scale(RKPPS), Social maturity test, Canadian Occupational Performance Measure(COPM), and Japanese Sensory Inventory Revised(JSI-2) before- and after the intervention. The result data analyzed by the Wilcoxon matched-pair signed rank test. Results : All data of post-intervention differed significantly; RKPPS(Z=-2.023, p=.043), Social maturity test(Z=-2.023, p=.043); occupational performance(Z=-2.023, p=.043); satisfaction(Z=-2.032, p=.042); and tactile system of JSI-2(Z=-2.032, p=.042). Conclusions : The results advocate that sensory integration intervention is effective in improving tactile processing, play, socialization, occupational performance, and occupational satisfaction of child with SMD. It is found that sensory integration intervention improves not only one's occupational performance but also underlying components of the performance. In order to generalize this conclusion, further studies need to be done with more number of subjects and consideration of environmental factors. Striving for more reliable and valid methods of data collection is also suggested.