• KIEAE Journal
• /
• v.15 no.1
• /
• pp.155-160
• /
• 2015

The annual average of energy sources is continuously increasing at a rate of 5.8%, and particularly, the power generation proportion of new/renewable energy is increasing significantly. Furthermore, South Korea has established a national energy master plan for 2008-2030 and is aiming at obtaining approximately 11% of total energy production from the wind turbine sector. Although offshore wind turbines are similar to wind turbines installed on land, they require materials with excellent dynamic properties and durability to prevent damage due to seawater at the lower parts and connecting parts. The lower parts of wind turbines are submerged in seawater, and the upper and lower parts are connected by filling the connecting part with grout. This paper describes the test results of the process of determining the mix ratios to develop ultra-high grout for offshore wind turbines. There is virtually no relevant technology regarding grout for offshore wind turbines in South Korea that can be referenced for the process of determining the mix ratios. Therefore, tests were conducted for determining compression strength, elastic modulus, flexural strength, density, constructability (floor test), and early strength by referencing a high-performance grout produced in South Korea, and the mixing process for achieving the goal strengths was described using the Korean Industrial Standards (KS) as the reference.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.135-138
• /
• 2000

This paper is intended to propose what manufacturing configuration (manufacturing planning and shop floor control) is suitable for the tire industry. Basically tire-manufacturing process is mixed-products, parallel-disconnected-flow-shop. Both throughput time and cycle tine are very short, the variety of tires is very high, the setup time is long, shop floor data reporting requirements is high, and there are many equipments and people working. And with no exception, tire industry also now confronts increasing requirements of delivery conformance with the above peculiar characteristics of tire manufacturing and changing market environments, this paper suggests, weekly master scheduling with no MRP is desirable and traditional kanban is right selection for shop floor control/scheduling. This paper describes why this configuration should be, using the manufacturing engineering principles and some new insights like four primitives of parallel flow shop. Generally known that shop with high parallel-product-mix and long setup time isn't good candidate for kanban. The four primitives of parallel flow shop explain why kanban is also useful scheduling technique in that environment.

• International Journal of Contents
• /
• v.7 no.4
• /
• pp.35-43
• /
• 2011

USN is a technology to detect human external environment. It is an important factor in buildinga ubiquitous computing environment. In this thesis, an authentication method was proposed to allow the sensor nodes, which have weak computing operation capability, to safely communicate with each other in USN and guarantee the anonymity of users for their privacy. In the proposed authentication method that takes into account the characteristics of sensor network, sensor nodes based on a symmetric key algorithm do not transfer keys directly, instead, they mix the random numbers received from AS to generate keys necessary for communications, having a master key and a pseudo-random number generator.In addition, in this thesis, TA was adopted to minimize the leakage of users' information, and a scheme through which virtual IDs received from AS are delivered to sensor nodes was applied to improve anonymity.

• Environmental and Resource Economics Review
• /
• v.28 no.2
• /
• pp.177-200
• /
• 2019

Energy demand forecast which serves as an essential input in energy policy is exposed to multiple factors of uncertainty such as GDP and weather forecast uncertainty. The Master Plan of Electricity Market in Korea which is biennially prepared is critically based on fluctuating energy demand forecast whereas its resulting proposal on electricity generation mix is substantially irreversible. The paper provides a real options model to evaluate energy transition policy by considering Knightian uncertainty as a measure to study multiple uncertainties with multiple set of probability distributions. Our finding is that the current energy transition policy under the master plan is not robust in terms of securing stable management of electricity demand and supply system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.473-480
• /
• 2010

A key objective is to meet the requirements for safe marine transport and protection of the marine environment by providing a comprehensive mix of Aids to Navigation commensurate with the amount of traffic and the degree of risk. The development of e-Navigation is driven by the compelling need to equip the master of a vessel and those ashore responsible for the safety of shipping with modem, proven tools to improve the reliability of marine navigation and communications. Although position fixing using GNSS is widely used, radar and visual AtoNs continue to be needed to provide safe, secure and environmentally clean navigation. The paper considers the role, evolution and future provision of traditional aids to navigation in an e-Navigation environment from both a technical and mariner perspective.

• International Journal of Costume and Fashion
• /
• v.13 no.2
• /
• pp.31-51
• /
• 2013

Hawaiian textile art has inspired artists and fashion designers worldwide and accounts for the high value of vintage Hawaiian apparel as collectibles. Other than tropical designs, a large portion of the textile art showcased the ethnic diversity of Hawai'i. In the 1800s, Hawai'i attracted immigrants from all over Asia, and the majority of Hawaii's residents today claim Asian ethnicity. This ethnic mix was made visible in textiles, a trend championed by Alfred Shaheen, an apparel manufacturer who loved Asian designs. He was committed to the celebration of cultural diversity at a time when Hawai'i was rapidly westernizing. The team of Asian textile artists he led created textile designs based on motifs and imagery from Asia. Shaheen's passionate vision led to the unique textiles produced in the 'golden age' of Hawaiian textiles, from 1940 through the 1960s. Alfred Shaheen has been called "Hawaii's Master Printer" and has been credited for turning Hawaiian textiles into art. The author's interviews with Mr. Shaheen were conducted over a decade, and form the basis for this paper in which Shaheen's own words are used to discuss his use of textile art in the transformation of the Hawaiian textiles and garment industry.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.215-221
• /
• 2020

Silica/SBR (styrene-butadiene rubber) compounds are the primary constituents of tire treads. Furthermore, the excellent dynamic viscoelastic properties of silica lead to good fuel efficiencies. However, the silanol group on the surface of silica does not mix well with non-polar rubber because of its polarity. This incompatibility causes aggregation due to the occurrence of hydrogen bonding between the hydroxyl groups, thereby reducing the dispersibility of silica. Recently, the wet master batch (WMB) process has been applied to overcome these disadvantages, and research on silica dispersants that can be used in the WMB process has been increasing. In this study, we prepared silica/SBR compounds by using three types of eco-friendly cellulose-based dispersants in the WMB process, namely: cellulose-, sodium carboxymethyl cellulose, and nanocellulose-based dispersants. Subsequently, we compared the vulcanization characteristics, viscoelastic properties, and mechanical properties of the compounds. The silica dispersibility in the rubber compounds was improved with the addition of the nano-cellulose dispersant, resulting in the enhancement of the workability, hardness, tensile strength, and wear resistance of the SBR compound.

• Asia pacific journal of information systems
• /
• v.29 no.4
• /
• pp.752-770
• /
• 2019

The purpose of this study is to incorporate telemarketing processes to improve telemarketing performance. For this application, we have attempted to mix the model of machine learning to extract potential customers with personalisation techniques to derive recommended products from actual contact. Most of traditional recommendation systems were mainly in ways such as collaborative filtering, which predicts items with a high likelihood of future purchase, based on existing purchase transactions or preferences for products. But, under these systems, new users or items added to the system do not have sufficient information, and generally cause problems such as a cold start that can not obtain satisfactory recommendation items. Also, indiscriminate telemarketing attempts can backfire as they increase the dissatisfaction and fatigue of customers who do not want to be contacted. To this purpose, this study presented a multi-purpose hybrid recommendation algorithm to achieve two goals: to select customers with high possibility of contact, and to recommend products to selected customers. In addition, we used subscription data from telemarketing agency that handles insurance products to derive realistic applicability of the proposed recommendation system. Our proposed recommendation system would certainly solve the cold start and scarcity problem of existing recommendation algorithm by using contents information such as customer master information and telemarketing history. Also. the model could show excellent performance not only in terms of overall performance but also in terms of the recommendation success rate of the unpopular product.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.236-245
• /
• 2002

The acrylic resin was first introduced as denture base materials in 1937 and it is commonly used for denture base fabrication nowadays. Three different curing cycles (Conventional curing cycle, short curing cycle and long curing cycle) and three commercially available heat-activated acrylic resins (Vertex RS, Lucitone 199 and ProBase Hot) were investigated to find the curing cycle and material that showed the minimum shrinkage of the resin during polymerization process. A brass master mold was fabricated and duplicated by additional silicone impression material. Stone molds were made by pouring of type III dental stone (SILKY-ROCK YELLOW, Whip-Mix, Louisville, Kentucky). It was embedded in the flask. Strain gauge and thermocouple were embedded in the specimen. Strain gauge and thermocouple were connected to signal conditioning amplifier and data was recorded by pre-programmed software. The parameters ESmax (Maximum expansion strain), Sb (Strain measured just before deflasking procedure), Sa (Strain measured just after deflasking procedure) and Sf (Strain measured at the end of the experiment) were measured. ${\Delta}$S was calculated from Sb and Sa (${\Delta}$S=Sb-Sa). In the experiment concerned about materials, the parameters 90-ESmax (Maximum expansion strain measured during early 90 minutes of curing procedure), 180-ESmax (Maximum expansion strain measured from 90 minutes to 180 minutes), Sb, Sa, ${\Delta}$S and Sf were measured and the following conclusions were made. 1. The ESmax value of conventional curing cycle showed the largest value and the 180-ESmax value of Lucitone 199 showed the smallest value. 90-ESmax values showed no significant difference (p<0.05). 2. ${\Delta}$S values of conventional curing cycle showed the positive values. ${\Delta}$S values of short curing cycle and long curing cycle showed the negative values. All three materials cured by conventional curing cycle showed the positive values. 3. The Sf values of long curing cycle and ProBase Hot (cured by conventional curing cycle) showed the smallest values.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.851-857
• /
• 2011

This study was conducted to develop a real time reverse transcriptase-PCR (RT-PCR) method for the detection of viable Enterobacteriaceae in milk using primers based on the genes of ribosomal proteins S11 and S13 and to determine effects of heating and subsequent treatments on the threshold cycle (Ct) of the real time RT-PCR. Total RNA was isolated from 17 strains of bacteria including 11 strains of Enterobacteriaceae suspended in milk using a modified Tri reagent method. SYBR Green Master Mix was added to the RNA and the mixture was subjected to the real time RT-PCR. The Cts of eleven type strains of the Enterobacteriaceae in milk ($10^7$ cells) in the real time RT-PCR ranged from 21.5 to 24.6. However, the Cts of Pseudomonas fluorescens, Acinetobacter calcoaceticus, and three gram-positive bacteria were more than 40. The real time RT-PCR detected as low as $10^3$ cells in agarose gel electrophoresis. The Cts increased from 22.0 to 34.2 when milk samples contaminated with Escherichia coli ($10^7$ cells/mL) were heated at $65^{\circ}C$ for 30 min. In addition, subsequent incubation at $37^{\circ}C$ for 6 and 24 h increased the Cts further up to 36.2 and 37.2, respectively. Addition of RNase A to the bacterial suspension obtained from the heated milk and subsequent incubation at $37^{\circ}C$ for 1 h increased the Cts to more than 40. The results of this study suggests that pretreatment of bacterial cells heated in milk with RNase A before RNA extraction might enhance the ability to differentiate between viable and dead bacteria using real time RT-PCR.