• Title/Summary/Keyword: mass uncertainty

Search Result 252, Processing Time 0.025 seconds

자동피킹 시스템 구동용 선형 유도 모터 드라이브 설계 및 적분형 가변구조 제어 기반의 강인 위치 제어기 설계 (Design of Linear Induction Machine Drive and Robust Position Controller based on Integral Variable Structure Scheme for Automatic Picking System)

  • 최정현;유동상;김경화
    • 한국지능시스템학회논문지
    • /
    • 제23권6호
    • /
    • pp.511-518
    • /
    • 2013
  • 고 정밀도와 고 속응성의 물류 이송을 위한 자동피킹 시스템 (Automatic Picking System; APS) 구동용 선형 유도 모터 드라이브의 설계 및 강인한 위치 제어 기법이 제안된다. 모델 불확실성에 대한 강인한 위치 제어기 설계를 위해서 적분형 가변구조 제어 기법이 고려된다. APS의 외란추력, 질량 및 마찰계수 등의 기계적 파라미터 변화는 위치 제어 성능에 직접적 영향을 주며 이러한 불확실성 하에서도 강인한 위치 응답 성능을 보유하는 위치 제어기가 설계된다. 선형 유도 모터의 모델을 위한 Simulink 라이브러리가 상태방정식으로부터 개발되며 이를 활용한 Matlab - Simulink 기반의 비교 시뮬레이션을 통해 제안된 방식이 강인한 위치 응답 성능을 가지며 고 정밀도와 고 속응성을 요구하는 APS에 적합함이 입증된다.

Positional uncertainties of cervical and upper thoracic spine in stereotactic body radiotherapy with thermoplastic mask immobilization

  • Jeon, Seung Hyuck;Kim, Jin Ho
    • Radiation Oncology Journal
    • /
    • 제36권2호
    • /
    • pp.122-128
    • /
    • 2018
  • Purpose: To investigate positional uncertainty and its correlation with clinical parameters in spine stereotactic body radiotherapy (SBRT) using thermoplastic mask (TM) immobilization. Materials and Methods: A total of 21 patients who underwent spine SBRT for cervical or upper thoracic spinal lesions were retrospectively analyzed. All patients were treated with image guidance using cone beam computed tomography (CBCT) and 4 degrees-of-freedom (DoF) positional correction. Initial, pre-treatment, and post-treatment CBCTs were analyzed. Setup error (SE), pre-treatment residual error (preRE), post-treatment residual error (postRE), intrafraction motion before treatment (IM1), and intrafraction motion during treatment (IM2) were determined from 6 DoF manual rigid registration. Results: The three-dimensional (3D) magnitudes of translational uncertainties (mean ${\pm}$ 2 standard deviation) were $3.7{\pm}3.5mm$ (SE), $0.9{\pm}0.9mm$ (preRE), $1.2{\pm}1.5mm$ (postRE), $1.4{\pm}2.4mm$ (IM1), and $0.9{\pm}1.0mm$ (IM2), and average angular differences were $1.1^{\circ}{\pm}1.2^{\circ}$ (SE), $0.9^{\circ}{\pm}1.1^{\circ}$ (preRE), $0.9^{\circ}{\pm}1.1^{\circ}$ (postRE), $0.6^{\circ}{\pm}0.9^{\circ}$ (IM1), and $0.5^{\circ}{\pm}0.5^{\circ}$ (IM2). The 3D magnitude of SE, preRE, postRE, IM1, and IM2 exceeded 2 mm in 18, 0, 3, 3, and 1 patients, respectively. No association were found between all positional uncertainties and body mass index, pain score, and treatment location (p > 0.05, Mann-Whitney test). There was a tendency of intrafraction motion to increase with overall treatment time; however, the correlation was not statistically significant (p > 0.05, Spearman rank correlation test). Conclusion: In spine SBRT using TM immobilization, CBCT and 4 DoF alignment correction, a minimum residual translational uncertainty was 2 mm. Shortening overall treatment time and 6 DoF positional correction may further reduce positional uncertainties.

유상하중의 불확실성을 고려한 쿼드로터의 모델 참조 적응제어 기법 설계 (Model Reference Adaptive Control of a Quadrotor Considering the Uncertainty of Payload)

  • 이동우;김남수;장광우;이성헌;방효충
    • 한국항공우주학회지
    • /
    • 제49권9호
    • /
    • pp.749-757
    • /
    • 2021
  • 쿼드로터를 활용한 운송 임무에서 임의의 유상하중을 장착하게 되면 질량, 관성모멘트, 무게중심의 위치와 같은 모델 파라미터가 변화하게 된다. 더욱이 유상하중이 기체에 장착되는 위치가 기체의 무게중심과 일치하지 않는 경우 무게중심의 변화는 야기되며 이는 제어 성능에 악영향을 미치게 된다. 이에 본 논문에서는 유상하중에 따른 모델의 불확실성을 보상하기 위하여, 선형 제차 조정기(Linear Quadratic Regulator, LQR) 기반의 모델 참조 적응 제어기법(Model Reference Adaptive Control, MRAC)을 제안한다. 먼저 고정된 유상하중을 고려한 쿼드로터의 동역학 모델을 유도하고, 선형 제차 조정기를 이용하여 기준제어기를 선정한다. 참조 모델은 과도응답을 향상하기 위해 폐루프 참조 모델을 사용하였으며, 선형 제차 조정기를 통하여 선정하였다. 또한, 안정성 분석을 통하여 모델 파라미터를 추정하기 위한 적응 제어기법을 설계하였다. 제안하는 제어기의 성능을 확인하기 위하여 모델 파라미터의 불확실성이 존재하는 상황에서 선형 재차 조정기와 성능을 비교하였다. 그리고 외란이 있는 상황에서 기존의 모델 참조 적응 제어기법과도 제안한 제어기의 결과를 비교하여 과도응답과 강건성에 대해서도 분석하였다.

터널발파로 인한 굴착선주변 암반거동의 확률론적 연구 (Probabilistic Analysis of Blasting Loads and Blast-Induced Rock Mass Responses in Tunnel Excavation)

  • 이인모;박봉기;박채우
    • 한국지반공학회논문집
    • /
    • 제20권4호
    • /
    • pp.89-102
    • /
    • 2004
  • 디커플링장전조건의 화약 폭발시 발생하는 발파압력은 최대압력, 최대압력 도달시간, 압력파형의 함수로 나타난다. 발파 최대압력과 최대압력 도달시간은 화약과 암반 특성의 함수이다. 화약과 암반특성시험 결과로부터 그 특성치의 확률분포를 산출하였다. 화약과 암반 특성치의 확률분포가 정규분포로 나타났으므로 발파 최대압력과 최대압력 도달시간의 확률분포도 정규분포로 추정되었다. 발파 최대압력과 최대압력 도달시간에 가장 크게 영향을 미치는 변수를 파악하기 위하여 매개변수분석과 불확정성분석을 실행하였다. 최대압력과 최대압력 도달시간은 매개변수분석결과 화약특성에 가장 크게 영향을 받았지만 불확정성분석결과 화약보다 암반특성에 크게 영향을 받았다. 발파로 인하여 굴착선주 변 암반에 발생하는 손상을 수치해석으로 분석하였다. 암반손상을 산정하기 위하여 연속체손상역학에 기초하여 사용자 부 프로그램을 작성하였다. 이 부 프로그램을 ABAQUS 주 프로그램과 연결하여 해석하였다. 동적 해석결과는 확대공 발파에 의한 손상이 외곽공보다 크게 나타났다. 확대공 배치, 암반분류 세분화 등 여굴방지 방안이 제안되었다 손상계수의 파쇄기준이 불명확하므로 fuzzy-random 확률이론을 적용하여 파쇄기준과 파쇄영역을 명확하게 나타내었다.

중성자 방사화분석법과 Gent SFU 샘플러를 이용한 도시의 농촌지역의 대기분지($PM_{10}$)관측 연구 (Study on Airborne Particulate Matter ($PM_{10}$) Monitoring in Urban and Rural Area by Using Gent SFU Sampler and Instrumental Neutron Activation Analysis)

  • 정용삼;문종화;김선하;박광원;강상훈
    • 한국대기환경학회지
    • /
    • 제16권5호
    • /
    • pp.453-467
    • /
    • 2000
  • The aim of this research is to collect and characterize fine particles (FPM:$\leq$2.5${\mu}{\textrm}{m}$) and coarse particles (CPM: 2.5~10${\mu}{\textrm}{m}$) using a low volume air sampler provided by the IAEA, at urban (Taejon) and rural area(Wonju) for a period of about two years(April 1996 to May 1998) and to promote a use of nuclear analytical techniques for air pollution studies. For the collection of airborne particulate matter (PM(sub)10), the Gent stacked filter unit sampler and polycarbonate membrane filters were employed. The concentration of trace elements in collected APM samples were determined byu instrumental Neutron Activation Analysis. For validation of the analytical data, internal quality control were implemented by using both the comparison of the analytical results of standard reference materials(NIST SRM 1648) and interlaboratory comparison for proficiency test (NAT-3). The standard uncertainty was less than 15% and Z-score of two samples were within $\pm$1. The monitoring of (PM(sub)10) mass concentration and elemental concentrations were carried out weekly. The average mass concentration of (PM(sub)10) in urban and rural areas were 59.2$\pm$36.5$\mu\textrm{g}$/㎥ and 41.4$\pm$23.7$\mu\textrm{g}$/㎥, respectively. To investigate the emission source, the enrichment factors were calculated for the fine and coarse particle fractions at two sites, respectively and these values were classified for anthropogenic and soil origin elements.

  • PDF

수소화물 발생-유도결합플라스마 질량분석법에 의한 철강 중의 납의 정량 (Determination of Lead in Steels by Hydride generation-Inductively Coupled Plama/Mass Spectrometry)

  • 박창준;송선진;이동수
    • 분석과학
    • /
    • 제14권5호
    • /
    • pp.410-415
    • /
    • 2001
  • 철강 시료 중의 납 분석을 위하여 수소화물 발생법을 플라스마에 납을 선택적으로 주입하고 유도결합플라스마 질량분석법으로 측정하는 분석법을 개발하였다. 납 수소화물 $PbH_4$의 생성을 위해서는 $NaBH_4$와 반응 전에 먼저 준안정 상태의 Pb(IV)로 만들어주기 위하여 산화제가 필요하다. $1000{\mu}g/mL$ 이상의 철 매질을 함유하는 시료용액으로 납 수소화물을 발생시키기 위한 최적조건을 찾는 연구를 수행하였다. 철 매질이 $10{\mu}g/mL$ 이상 존재할 때는 $K_2Cr_2O_7$이 효과적인 산화제로 작용하였으며 젖산을 가하여 감도를 향상시켰다. 시료용액의 산농도 그리고 산화제와 젖산 농도의 최적값은 철 매질의 농도에 따라 달랐다. 동위원소 희석법을 사용하여 납을 정량하였으며 철강 표준물질 NIST SRM 361, 362 분석결과는 불확도 범위안에서 검정값과 잘 일치하였다.

  • PDF

Determination of Dibutyltin in Sediments Using Isotope Dilution Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry

  • Yim, Yong-Hyeon;Park, Ji-Youn;Han, Myung-Sub;Park, Mi-Kyung;Kim, Byung-Joo;Lim, Young-Ran;Hwang, Eui-Jin;So, Hun-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권3호
    • /
    • pp.440-446
    • /
    • 2005
  • A method is described for the determination of dibutyltin (DBT) in sediment by isotope dilution using liquid chromatography inductively-coupled plasma/mass spectrometry (LC-ICP/MS). To achieve the highest accuracy and precision, special attentions are paid in optimization and evaluation of overall processes of the analysis including extraction of analytes, characterization of the standards used for calibration and LC-ICP/MS conditions. An approach for characterization of natural abundance DBT standard has been developed by combining inductively-coupled plasma/optical emission spectrometry (ICP/OES) and LC-ICP/MS for the total Sn assay and the analysis of Sn species present as impurities, respectively. An excellent LC condition for separation of organotin species was found, which is suitable for simultaneous DBT and tributyltin (TBT) analysis as well as impurity analysis of DBT standards. Microwave extraction condition was also optimized for high efficiency while preventing species transformation. The present method determines the amount contents of DBT in sediments with expanded uncertainty of less than 5% and its result shows high degree of equivalence with reference values of an international inter-comparison and a certified reference material (CRM) within stated uncertainties.

불안정한 현실과 대면하는 이 시대 청년들의 삶에 관한 질적인 분석 '삼포세대', 그리고 '헬조선'이라는 호명에 대한 청년주체들의 체화된 대응과 관점을 중심으로 (A Cultural Analysis of the Varying Modes of Survival and the Particular Structures of Feeling among Young Adults in Contemporary South Korea in an Era of Fierce Competition and Widespread Social Uncertainty)

  • 송동욱;이기형
    • 한국언론정보학보
    • /
    • 제84권
    • /
    • pp.28-98
    • /
    • 2017
  • 이 작업은 현재 '헬조선'으로 상징되는 한국 사회에서, 다수의 청년주체들이 대면하고 있는 극심한 사회경제적인 불안과 이들의 삶을 옥조이는 과도한 경쟁의 집합적인 효과를 질적인 분석과 비판적인 문화해독의 방식으로 접근한다. 이 과정에서 연구에 섭외된 청년층이 기존의 '삼포세대' 담론에 관하여, 또한 자신들이 처한 불안정하고 그늘진 상황과 이에 연동하는 주요 사회적인 이슈들에 대하여, 어떠한 복합적인 반응과 구체적인 비판, 그리고 항변 등을 제기하는지를 세밀하게 진단하고자 한다. 더 나아가서 이들 청년주체들이 표출하는 자기서사와 그 속에 배태된 다기한 감정의 결을 조밀하게 탐구함으로써, 이 시대 청년층이 처한 상황이 응축하는 구체적인 맥락성의 특징과 특히 '생존주의'의 명암을 진중하게 조명하고자 한다.

  • PDF

The Starting Characteristics of the Steady Ejector-Diffuser System

  • Gopalapillai, Rajesh;Kim, Heuy-Dong;Matsuo, Shigeru;Setoguchi, Toshiaki
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.680-685
    • /
    • 2008
  • The ejector is a simple device which can transport a low-pressure secondary flow by using a high-pressure primary flow. In general, it consists of a primary driving nozzle, a mixing section, and a diffuser. The ejector system entrains the secondary flow through a shear action generated by the primary jet. Until now, a large number of researches have been made to design and evaluate the ejector systems, where it is assumed that the ejector system has an infinite secondary chamber which can supply mass infinitely. However, in almost all of the practical applications, the ejector system has a finite secondary chamber implying steady flow can be possible only after the flow inside ejector has reached an equilibrium state after the starting process. To the authors' best knowledge, there are no reports on the starting characteristics of the ejector systems and none of the works to date discloses the detailed flow process until the secondary chamber flow reaches an equilibrium state. The objective of the present study is to investigate the starting process of an ejector-diffuser system. The present study is also planned to identify the operating range of ejector-diffuser systems where the steady flow assumption can be applied without uncertainty. The results obtained show that the one and only condition in which an infinite mass entrainment is possible is the generation of a recirculation zone near the primary nozzle exit. The flow in the secondary chamber attains a state of dynamic equilibrium at this point.

  • PDF

국내 석유계총탄화수소 위해성평가 방법 마련을 위한 국외 지침 비교 및 고찰 (Comparison and Consideration on Foreign Guidances for Establishing Risk Assessment Method of Total Petroleum Hydrocarbons in Korea)

  • 윤성미;노회정;김지인;윤정기;임가희;이홍길;조훈제;김인자;황지애;김현구
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제23권6호
    • /
    • pp.54-72
    • /
    • 2018
  • This study reviewed standard operation procedures for fractionation and analytical methods of total petroleum hydrocarbons (TPH) in north america and european countries to aid proper establishment of risk assessment protocols associated with TPH exposure in Korea. In current, the TPH fraction methods established by Massachusetts Department of Environmental Protection (MassDEP) and Total Petroleum Hydrocarbon Criteria Working Group (TPHCWG) are most frequently employed worldwide. Both methods were developed on the basis of direct exposure of TPH from soil, although the method by TPHCWG also took into account the mobility of TPH. Volatile and extractable fractions of petroleum hydrocarbons were analyzed either separately or together. TPH fractionation methods were evaluated based on conservative toxicity values considering the uncertainty of risk assessment in light of current standard protocol for analyzing soil contaminants in Korea, and it was concluded that the method developed by MassDEP is more appropriate.