• Journal of the Korean Magnetic Resonance Society
• /
• v.19 no.3
• /
• pp.119-123
• /
• 2015

The thermodynamic properties and structural geometry of $KMgCl_3{\cdot}6H_2O$ were investigated using thermogravimetric analysis, differential scanning calorimetry, and nuclear magnetic resonance. The initial mass loss occurs around 351 K ($=T_d$), which is interpreted as the onset of partial thermal decomposition. Phase transition temperatures were found at 435 K ($=T_{C1}$) and 481 K ($=T_{C2}$). The temperature dependences of the spin-lattice relaxation time $T_1$ for the $^1H$ nucleus changes abruptly near $T_{C1}$. These changes are associated with changes in the geometry of the arrangement of octahedral water molecules.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1861-1868
• /
• 2016

In this paper, a three-phase AC-DC high step-up converter is developed for application to microscale wind-power generation systems. Such an AC-DC boost converter prossessess the property of the single-switch high step-up DC-DC structure. For power factor correction, the advanced half-stage converter is operated under the discontinuous conduction mode (DCM). Simulatanously, to achieve a high step-up voltage gain, the back half-stage functions in the continuous conduction mode (CCM). A high voltage gain can be obtained by use of an output-capacitor mass and a coupled inductor. Compared to the output voltage, the voltage stress is decreased on the switch. To lessen the conducting losses, a low rated voltage and small conductive resistance MOSFETs are adopted. In addition, the coupled inductor retrieves the leakage-inductor energy. The operation principle and steady-state behavior are analyzed, and a prototype hardware circuit is realized to verify the performance of the proposed converter.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.89-98
• /
• 2005

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. Therefore membrane structures arc unstable structures initially. These soft structures need to be introduced initial stresses first because of its initial unstable state, and it happens large deformation phenomenon. To find the structural shape after large deformation caused by initial stiffness introduced, we need the shape analysis considering geometric nonlinearity in structural design procedure. In this study, we investigate into the stress concentration at crack of membrane structures. Therefore, using the nonlinear analysis program that NASS (Nonlinear Analysis for Spatial Structures) perform nonlinear analysis, and stress distribution for creak length investigate for using linear elastic fracture mechanics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.472-475
• /
• 2013

This study proposes an equivalent bell model for the Sacred Bell of the Great King Seongdeok An equivalent bell model bas the modal property of the real bell and it consists of an axi-symmetric bell body and a point mass, The bell model is constructed by the finite element analysis based upon the theory of a revolutionary shell. Using the equivalent bell model. the beat period can be controlled by decreasing the thickness of local area. This study aims at showing a beat period control method for a large bell having the similar size to the Sacred Bell of the Great King Seongdeok.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.945-952
• /
• 1994

In this paper, a mathematical model for a belt driven system is proposed to analyse the vibtation characteristics of the driving units with belts and the free and forced vibration analyses are carried out. The mathematical model for model for the belt-driven system includes belts,pulleys, spindle and bearings. Using the Hamilton principle, the 4 nonlinear governing equations and the 12 nonlinear boundary conditions are derived. To linearize and discretize the nonlinear govering equations and boundary conditions, the perturbation method and Galerkin method are used. Also, the free vibration analyses for the various parameters of the belt driven system, which are belt tension, belt length, material property of belt, belt speed and pulley mass are made. The forced vibration analyses of the system are made and the dynamic responses for the main parmeters are analysed with the belt driven system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.367-367
• /
• 2011

CIGS solar cell with copper, indium, gallium and selenium is a second generation solar cells for the lowering of the manufacturing cost. The relative ratio of the four elements is one of the most important measurement issues because the photovoltaic property of CIGS solar cell depends on the crystalline structure of the CIGS layer. However, there is no useful analysis method for the composition of the CIGS layer. Recently, AES depth profiling analysis of CIGS films has been studied with a reference material certified by inductively coupled plasma optical emission spectroscopy. However, there are some problems in AES depth profiling analysis of CIGS films. In this study, the in-depth profiling analysis was investigated by secondary ion mass spectrometry (SIMS) depth profiling analysis. We will present the compositional depth profiling of CIGS films by SIMS and its applications for the development of CIGS solar cells with high efficiency.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.22-27
• /
• 2008

Sulfadiazine and silver sulfadiazine are well-known bactericidal agent routinely used clinical settings. Antimicrobial acid dyes were synthesized by introducing sulfadiazine or silver sulfadiazine and applied on nylon fabric. The Chemical Structure of the Synthesized dyes was identified by HPLC-mass. The dyeability of synthesized acid dyes for nylon fabric was similar to commercial acid dyes. Resistance to washing, rubbing and lightfastness were good. Nylon fabrics dyed with synthesized acid dyes had good antimicrobial properties. Durable antimicrobial properties after 20 times washing have shown good result that reduction ratio of colonies, is 99.9 %. Mixed dyeing were carried out using commercial acid dyes(leveling type) and synthesized dyes. The mixed dyeings have also shown good antimicrobial properties.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.144.2-144.2
• /
• 2011

A dwarf irregular galaxy IC10 in the Local Group is the nearest starburst galaxy, playing an important role revealing the details of starburst. It is located close to the Galactic plane so that it suffers from severe foreground reddening. Therefore much less is known about the property of this galaxy compared with other galaxies in the Local Group. So are star clusters in this galaxy. We present a photometric study of the star clusters in IC10. 57 star clusters are already found from HST images in previous studies, and we newly found 15 star clusters using Local Group Survey data and SUBARU/Suprime-Cam data. We derive UBVRI integrated photometry of these star clusters from the images from Local Group Survey data and JHKs photometry taken with SUBARU/MOIRCS. Then we derive age and mass of these clusters using the spectral energy distribution fitting with the simple stellar population models. We discuss the photometric and physical properties of these star clusters and its implication.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.610-614
• /
• 2016

This paper proposes an inextensible wire-shaped deformation model to simulate catheter behavior. The wire-shaped model consists of serially-connected mass points and massless rigid links. Torsional springs and dampers are employed to accommodate bending. Deformation is computed by updating the rotation angles from the global coordinates while maintaining the fixed length condition. Equations of motion is derived from double pendulum motion. Spring constant is computed using strain energy and potential energy stored in a torsional spring to reflect material property. Simulation is conducted to show deformation of wire model while maintaining inextensibility condition and including material properties. The proposed method guarantees inextensible constraint in the catheter simulation.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.461-470
• /
• 2009

A railroad has a benefit of the mass transportation of a passenger and cargo, but just a time of accident could cause a huge loss of a human life and property. Especially, a typhoon and a localized torrential downpour usually happened in summer season have caused average 38.29 times of the missing roadbed which support the railroad in recent 7 years. If a train would pass on this railroad which the roadbed was missed, there could be a huge accident and many people will die. But, the security issue is not satisfied because the method of sensing the missing roadbed is depending solely on the naked eye inspection by a person in charge. So, in this study, I would like to suggest the missing roadbed real-time sensing and train operation system to reduce the possibility of the railroad accident by controlling the operation of train when the missing roadbed condition would be sensed in the real-time system.