• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.44-49
• /
• 2013

As the polyethylene of high strength and ductility stabilized chemically has been mass-produced, it is spreading widely as material of industrial piping and water service piping. Recently, High density polyethylene (HDPE) pipe has been used even in water supply system of plant as buried pipe instead of cast iron pipe in domestic, but HDPE pipe has a probability of occurrence of damage if plant design and operating conditions are not considered. As a result of reviewing with respect of system design engineering based on operating conditions and verification test results, the specific design criteria for the use of HDPE piping in fire water supply system need to be established because of the possibility of crack damage due to water hammer.

• Plant Biotechnology Reports
• /
• v.2 no.3
• /
• pp.179-189
• /
• 2008

We established an efficient plant regeneration system for Catharanthus roseus L. (G.) Don through somatic embryogenesis. Embryogenic callus was induced from hypocotyl of seed germinated in vitro. Somatic embryogenesis in Catharanthus has been categorized into three distinct stages: (1) initiation and proliferation of embryo; (2) maturation, and; (3) germination or plantlet conversion. Beside plant growth regulators, various stages of embryogenesis were screened for their response to a wide variety of factors (pH, gelrite, light, sugar alcohols, polyethyleneglycol and amino acids), which affect embryogenesis. All of the tested factors had a small to marked influence on embryogeny and eventual conversion to plantlets. The plantlets were acclimatized successfully in a greenhouse. To our knowledge, this is the first report describing a detailed study of various cultural factors which regulate embryogenesis in C. roseus. The results discussed in this paper may be used in mass propagation to produce medicinal raw material, and the embryo precursor cells could be used in genetic modification programmes that aim to improve the alkaloid yield as well.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.1
• /
• pp.49-57
• /
• 1993

Seedling of Aralia continentalis is more effective method rather than use of vegetative organ for mass propagation. However, lower germination rate is the main problem for seeding. In this study, we analyzed substances in aim to relate to germination process. The results indicated that longer period of stratification brought lower amount of phenolic compounds in the seeds and both promoting and inhibiting substances were at very low level or gradually disappeared.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.28.2-28.2
• /
• 2011

Coronal Mass Ejections (CMEs) are enormous eruptions of plasma ejected from the Sun into interplanetary space, and mainly responsible for geomagnetic storms and solar energetic particle events. It is very important to infer their direction of propagation, speed and their 3-dimensional configurations in terms of space weather forecast. Two STEREO satellites provide us with 3-dimensional stereoscopic measurements. Using the STEREO observations, we can determine the 3-dimensional structure and radial velocity of the CME. In this study, we applied three different methods to the 2008 April 26 event: (1) Ice cream Cone Model by Xue (2005) using the SOHO/LASCO data, (2) Flux rope model by Thernisien (2009) using the STEREO/SECCHI data, (3) Flux rope model with zero angle using the STEREO/SECCHI data. The last method in which separation angle of flux rope is zero, is similar to the ice cream cone model morphologically. The comparison shows that the radial speeds from three methods are estimated to be about 750km/s and are within ${\pm}120km/s$. We will extend this comparison to other CMEs observed by STEREO and SOHO/LASCO.

• Journal of computational fluids engineering
• /
• v.10 no.1
• /
• pp.51-55
• /
• 2005

For proper installation, operation and performance of axial flow jet engines in aircrafts, the impacts and effects of inlet flow distortion in axial compressors have to be understood. Inlet distortion conditions may cause component-mismatch and instability problems known as rotating stall, and severe oscillations of mass flow rate called surge or a combination of both. Typical effects of this phenomenon include stresses and wear on the compressor blading, destruction of entire jet engines due to the failure of airfoil and mechanical failure or interruption of the combustion process. Therefore, it is important to study inlet flow distortion and its propagation effects to minimize and hence to prevent the occurrence of such calamity. The current novel integral method with parametric analysis signifies its validity to this field of research and offers much potential for further improvements. The present effort further indicates that this simple method may be flourishing in the problems of strongly distorted flow and propagating stall in axial compressor. It is therefore believe that using a more realistic and flexible velocity and pressure profiles could develop this approach further.

• Journal of Plant Biotechnology
• /
• v.8 no.1
• /
• pp.37-41
• /
• 2006

In vitro mass multiplication of Vanilla planifolia was investigated using node as explant. Multiple shoots were developed in MS medium supplemented with $2.0mgl^{-1}$ 6-benzylaminopurine and $1.0mgl^{-1}$ $\alpha$-naphthalene acetic acid. Multiple shoots were maintained for 6-T weeks with regular subculturing at the end of $3^{rd}$ week onto fresh medium. The maximum number of shoots at the rate of 12.8 per node segment was achieved over a period of four weeks. The elongated shoots were separated from the shoot clusters and were transferred onto half strength MS medium supplemented with indole-3-acetic acid ($1.0mgl^{-1}$) over a period of 28 days for induction of roots. The development of roots was observed on $7^{th}$ day of incubation. The in vitro raised plantlets were transferred to poly-cups, covered with polyethylene sheets and maintained under shade net for 25 days for hardening. Finally these plants were transferred to field and recorded that 85 % of tissue cultured plants were survived. From the present study, a simple and efficient micropropagation protocol was developed for Vanilla planifolia using single node segments as explants.

• Computers and Concrete
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2013

The use of ground fly ash in concrete can increase the risk of slump loss due to the drastic surface change of the particles after the grinding treatment and the accelerated reaction compared to the untreated ash. This study is aimed at the early age hydration and time-dependent rheology changes of cement paste containing ground fly ash. An original fly ash is ground into different fineness and the hydration of cement paste containing the ground fly ash is monitored with the ultrasound propagation method. The zeta potentials of the solid particles are measured and the changes of rheological parameters of the cement pastes with time are analyzed with a rheometer. A particle packing model is used to probe packing of the solid particles. The results show that the early age hydration of the paste is strongly promoted by replacing Portland cement with fly ash up to 30 percent (by mass), causing increase of the yield stress of the paste. The viscosity of a paste containing ground fly ash is lower than that containing the untreated ash, which is explained by the denser packing of the solid particles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.4
• /
• pp.141-152
• /
• 1984

Nowadaty, To keep pace with the mass transportation carried out by vessels in the international trade, the Korean government is trying to make a rapid progress to be a higher ranked shipping country to the world through the shipping increase. For the effective management of international trade by vessels and the safe operation of vessels, it is indispensable for ships radio communication to be effective and smooth. Therefore, to enhance the efficiency of ships radio communication is one of the primary factors to be solved for the econimics of shipping management. The reserch area is not only limited to the ships radio communication on the North Pacific Ocean but limited to the ships radio communication which is one of the chiefest methods of communications. From the research for the efficient methods of ships radio communication, the following results are obtained. (1) The operator on ships radio communication should have the knowledge of specific know-how and wide experience in the operation of ships radio communications. (2) The operator should abopt the radio propagation prediction made by the Ministry of Communications to use the best ionosphere reflection in the short wave communications. (3) The increase the radio officer of 1 to 2 in order to contrive the safety at sea and to keep the ships radio communication fare low. (4) The owner should pay their attentions to the education and employment of radio officer. (5) The authorities concerned on the ships radio communication should estabilish the effective and consistent policy for the ships radio officers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.391-398
• /
• 2004

The propagation mechanism of a detonation pressure with fully coupled charge is clarified and the blasting pressure propagated in rock mass is derived from the application of shock wave theory. Probabilistic distribution is obtained by using explosion tests on emulsion and rock property tests on granite in Seoul and then the probabilistic distribution of the blasting pressure is derived from their properties. The probabilistic distributions of explosive properties and rock properties show a normal distribution so that the blasting pressure propagated in rock can be also regarded as a normal distribution. Parametric analysis was performed to pinpoint the most influential parameter that affects the blasting pressure and it was found that the detonation velocity is the most sensitive parameter. Moreover, uncertainty analysis was performed to figure out the effect of each parameter uncertainty on the uncertainty of blasting pressure. Its result showed that uncertainty of natural rock properties constitutes the main portion of blasting pressure uncertainty rather than that of explosive properties.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.407-408
• /
• 2006

Passenger safety is one of the most important considerations in the purchase of an automobile. A curtain-type air bag is increasingly adapted in deluxe cars for protecting passengers from the danger of side clash. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to pump up the air bag-curtain. Although the inflator housing is fundamental in designing a curtain-type air bag system, flow information on the inflator housing is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the inflator housing using a dynamic PIV system. From the velocity field data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the airbag inflator housing in the initial stage, we can see a flow pattern of broken shock wave front and its downward propagation. The flow ejecting from the inflator housing was found to have large velocity fluctuations and the maximum velocity was about 700m/s. The velocity of high-speed flow was decreased rapidly and the duration of high-speed flow over 400m/s was maintained only to 30ms. After 100ms, there was no perceptible flow.