• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.311-316
• /
• 2020

The main cause of DMSMS is the rapid replacement cycle and short life cycle of parts, according to the development of science, compared to the long life cycle of weapons systems. In particular, the problem of the supply and demand of such parts becomes even more acute during the operation maintenance phase after the mass production and power generation stage. To eliminate DMSMS problems that arise continuously from development to the operation of weapon systems and select the most cost-effective countermeasures to obsolescence, this paper suggests a standard to determine the appropriate time for quantitative performance improvement by conducting total life cycle cost analysis. For such purpose, this study examined the domestic and overseas cost analysis methods and applied it to single domestic weapon system to verify the research. This study responds to the issue of discontinuing components and helps reduce the total life cycle cost of military products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.223-229
• /
• 2020

The current technological advances are changing the way people live. In the history of war in the past, nations or people with an edge in military science and technology have always been the victor. The emergence of new technologies not only alters war patterns drastically but also affects military operational concepts and organizational systems. As the paradigm of the security environment changes, developed countries are investing heavily in defense R & D for their security. Therefore, the importance of professionalism of the defense acquisition personnel who perform their tasks from the exploration and development of weapon systems to mass production, deployment, and logistics support cannot be overemphasized. In the United States, an advanced country in this field, to improve the work efficiency of acquisition personnel in the defense field, the Directive of Ministry of Defense issued a law on education and training career development for personnel in 1990. The present study refers to related materials, such as the Desk Guide for the main education requirements for the US acquisition personnel in the military field, which contributes to the improvement of the workforce of the acquired manpower after the systematic education system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.63-69
• /
• 2012

Recently, the cement industries brought very severe environment problems such as resource depletion and global warming with massive carbon dioxide during its production. The number of cases using industrial by-products such as the ground granulated blast furnace slag (GGBFS) in concrete mixtures is increasing to resolve the environmental issue. GGBFS is mainly used in the range between 20 to 50% to replace cement, but nowadays lots of researches are carried out to develop the alkali-activated slag (AAS) concrete with no cement. In this study, the early age properties of alkali activated slag (AAS) mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The experimental variables were the water-binder ratios of 0.3, 0.4, and 0.5 and NaOH as the alkali activator of 4%, 8%, and 12% by the mass of GGBFS, and compressive strength, flow, setting time, and ultrasonic pulse velocity of AAS mortars were measured and analyzed. It is found from the test results that as the normal concrete the lower W/B, the higher compressive strength. However, superplasticizer has to be used for producing high strength AAS concrete because the workability of AAS mortar are significantly lowered.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2015

Purpose - This study attempts to analyze whether or not there are characteristics among the top management of companies that promote corporate performance at venture companies. It investigates the characteristics of the human and social capital that are inherent in top management at a venture company and conducts an empirical analysis of hypotheses examining if these characteristics will affect utilization of the governmental R&D support system as well as affect the firm's initial success. Research design, data, and methodology - This study conducted theoretical and empirical research together to accomplish the goal of the study. The pilot study researched human capital and social capital as the independent variables; the governmental R&D support system as the parameter; and, the initial success as the dependent variable. The empirical study carried out research on the model, establishment of hypotheses, and the statistical treatment. A survey was conducted targeting top management of high-tech venture companies in Daedeok Innopolis; 500 questionnaires were distributed; and, 222 were collected. Results - The human and social capital inherent in top management at venture companies in the early stages of their existence become good evaluation data for those who are invested in similar resources. If top management includes strong human and social capital, access to external resources will be easier; these will have a positive influence on the selection of overnmental support systems; and, this proper support will also have a positive influence on the initial success of the venture company. The results revealed the following. First, it was found that when the educational level and functional background, (the top management human capital), are the output function, top management human capital had a significant influence on selection of governmental R&D support funds. Second, it was found that the internal social capital and external social capital, (the top management social capital), had a significant influence on selection of governmental R&D support tasks. Third, it was found that selection of the governmental R&D support tasks at the start of the venture company had a positive influence on the corporate financial performance such as sales, business profits, and the increase in workers; and, had a significant influence on nonfinancial performance such as market share, competitive position, product competitiveness, and the future product development. Conclusions - Selection of the governmental R&D support system is not recognized as part of the direct sales of a venture company in its early stages, but as it can reduce costs for technical development and helps significantly in creating test products and mass production, it has a positive influence on the company's financial performance and nonfinancial performance as a result. Therefore, companies should take great efforts to frequently be selected as a candidate in the governmental R&D support system, as it can help facilitate R&D that requires extensive funds. As a result, companies can expect effects such as job creation and patent applications and they can advance future product sales.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.313-318
• /
• 2014

From 2008 to 2013, the mussel Mytilus galloprovincialis were collected from a major area of mussel production (Changseon area), which is a designated shellfish-cultivating area for export, located on the southern coast of Korea. The samples were analyzed for mercury (Hg) using a direct Hg analyzer and for other metals, such as cadmium (Cd), lead (Pb), arsenic (As), chromium, copper, nickel, and zinc, using inductively coupled plasma mass spectrometry. The concentrations and bioaccumulation of the heavy metals were determined, and a potential risk assessment was conducted to evaluate their hazards towards human consumption. The concentration and bioaccumulation ratio of Cd were the highest of the three hazardous metals (Cd, Pb, and Hg). The concentrations of hazardous metals in all samples were within the limits set by Korea and other countries. The estimated dietary intake (EDI) was compared to the provisional tolerable daily intake (PTDI) adopted by the Joint FAO/WHO Expert Committee on Food Additives and the U.S. Environmental Protection Agency. The EDIs of all heavy metals tested for mussel samples ranged from 0.01 to 4.99% of the PTDI; the highest value was measured for As. The hazard index (HI) can be used to assess the risk of heavy metal consumption associated with contaminated food. The HI for all samples was far less than 1.0, which indicates that the mussels produced in the Changseon area do not represent an appreciable hazard to humans and are fit for consumption.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.751-765
• /
• 1999

Several growth factors and polypeptidesare not commonly yet used for regenerators of bone tissue or alveolar bone because of the insufficiency of studies on their side effects, genetic engineering for mass production and stability for clinical application. Recently, many natural medicines, which have advantage of less side effects and possibility of long-term use, have been studied for their capacity and effects of anti-bacterial, anti-inflammatory and regenerative potential of periodontal tissues. Olibanum, Myrrha, Phlomis Radix, and Cimicifugae Rhizoma have been traditionally used as a drug for treatment of bone disease in oriental medicine. The objective of this study was to examine the ability of alkaline phosphatase(ALP) synthesis of rat calvarial osteoblast(MC3T3-E1) when several natural medicines were supplemented. MC3T3-E1 cells were cultured with ${\alpha}$-MEM(negative control), dexamethasone(positive control), and each natural medicines for 3 and 5 days. And then ALP synthesis was measured by spectrophotometer for enzyme activity and by naphthol AS-BI staining for morphometry. All of the natural medicines induced higher activity of ALP synthesis than the negative controls. Especially Olibanumind uced the higher activity than the positive controls (p<0.05). In the aspects of culturing time, except Cimicifugae Rhizoma, the natural medicines induced higher activity of ALP synthesis at 5 days than at 3 days (p<0.05). In morphometry, all of the natural medicines showed statistical significance compared to the negative control (p<0.05). Myrrha a n d Phlomis Radix showed larger positively stained area at 5days than at 3 days, whereas the others did not showed the difference between at 5 and at 3 days(p<0.05). These results indicate that several natural medicines have an inducing ability of ALP synthesis in MC3T3-E1 cells.

• Archives of design research
• /
• v.21
• /
• pp.109-121
• /
• 1997

The poster in America was considered merely a means of advertising until the late 1880s, and was not thought to have any intrinsic value. During the 1890s, the poster in America came into its own as a medium of artistic expression, and it was recognized anew as an medium of advertising. The production and circulation of posters became active, and it won the popularity of poster collectors. But the American poster renaissance flourished for a few brief years in the 1890s. In this thesis, I paid attention that the art poster in America was mainly a product of the publishing trade, and that it's rise and fall was connected with the circumstances of the publishing business. In chapterII, I discussed the growth of publishing business and the phenomenon of poster craze, and tried to figure out the characteristic of American poster design in 1890s. The American poster boom was formally initiated in Spring 1893, when Edward Penfield published the first of his monthly designs advertising Harper's Magazine. Penfield created a native American tradition of realism in the series of Harper's posters, his figures are realistic though anonymous, and are drawn without distortion or grotesquery, and details are reduced to essentials but not eliminated. In chapterIII, I discussed the change in book cover design in the 1890s. The rapid evolution of book and magazine covers was largely a reaction to the poster craze. Most magazines were issued with the same standard covers month after month at that time. In 1894, when William Bradley was asked to design a standard cover for the Inland Printer, he convinced the publishers to change the cover with every issue instead of designing one permanent cover. With the poster craze at its height, posters became big business, but still they were not very successful as advertisements. Because collectors of the 1890s were more interested in acquiring posters than in buying books. Significantly, this was also the moment when poster like designs began to appear on the covers of books and mass magazines. Publishers took notice of an idea. If the eye-catching design was on the cover itself rather than on a separate poster, the customer who wished to acquire the design would be obliged to buy the magazine. So there was no distinction stylistically between the posters of the 1890s and the magazine covers of the early 1900s. At the same time, the artistic poster was beginning to decline. While the most typical advertisements of the 1890s were the book and magazine posters of Bradley and Penfield, after 1900 advertisements for manufacturers' products played an increasingly prominent role. They would never again assume the leading role that they had played in the 1890s.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2001

The biological carbon dioxide fixation using microalgae and photo-bioreactor has been known as an effective carbon dioxide reduction technology. As algae has many other environmental factor for its growth, the desirable cultivation factors were investigated using a green alga, Euglena gracilis Z. In this study, Euglena gracilis Z showed good $CO_2$ fixation ability in high $CO_2$ concentration of 10-20% and it contained the high protein and vitamin E enough to be used as fodder. For the mass cultivation, the continuous and semi-continuous cultivation methods were employed. The optimum hydraulic retention time (HRT) for the continuous cultivation was 4 days at carbon dioxide concentration of 10%. In this condition, the final cell number was $3.57{\times}10^6/m{\ell}$. The growth of Euglena gracilis Z increased according to the light intensity.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.722-729
• /
• 2004

Leptin is an adipocyte-secreted hormone and its plasma levels correlate with total body fat mass, however, it also plays a regulatory role in immunity, inflammation, and hematopoiesis. Chemokine is known as a chemoattractant cytokine in inflammatory reaction, but its role in leptin reaction has not been well studied. In this study, the direct effect of leptin on the expression of chemokine mRNAs and lipopolysaccharide (LPS)-induced chemokine KC mRNA in mouse peritoneal macrophages was investigated. Leptin did not induce the expression of lymphotactin, RANTES, eotaxin, MIP-1$\beta$, MIP-1$\alpha$, MIP-2, MCP-1, IP-10, TCA-3, and KC mRNA in mouse peritoneal macrophages, and had no direct effect on the expression of these LPS-induced chemokine mRNAs except KC mRNA. The synergistic effect of leptin on the expression of LPS-induced KC mRNA occurred late in the time course of response to LPS. The increased expressions of Ob-Rb mRNA and leptin receptor protein were detected during the LPS treatment. Leptin produced a substantial increase in the stability of the LPS-induced KC mRNA, and the synergistic effect of leptin on LPS-induced KC mRNA expression was further augmented by cycloheximide (CHX). Pyrrolidine dithiocarbamate (PDTC) did not block the synergistic effect of leptin on LPS-induced KC mRNA expression in mouse peritoneal macrophages. These data suggest that although leptin has no direct effect on the expression of lymphotactin, RANTES, eotaxin, MIP-1$\beta$, MIP-1$\alpha$, MIP-2, MCP-1, IP-10, TCA-3, and KC mRNA in mouse peritoneal macrophages, the synergistic effect of leptin on the expression of LPS-induced KC mRNA has the possibility that LPS might induce the expression of the Ob-Rb receptor or an unknown gene(s) that sensitizes macrophages to the synergistic function of leptin. Therefore, further studies are necessary to examine leptin as a regulatory factor of chemokine production.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.