• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.375-381
• /
• 2008

Various problems such as durability degradation may happen when extra water is added to concrete. Because of these reasons, the change of water content is managed by using rapid evaluation method of unit water content such as electric capacity method, heat drying method making use of micro wave, unit capacity mass method among various methods. Especially, in Japan, guidance for the change of water content ($\pm$ 10, 15, 20 kg/$m^3$ etc.) were regulated and used. However, it is the real situation that the guidance which were regulated in South Korea evaluate suitability only considering production and measurement error under the circumstances which are not considering the degree of durability degradation. Therefore, this study tries to investigate the influence of addition of extra water in the concrete on the durability degradation of concrete when it was added by artificial manipulation or by management error. From the test results, a guideline of the contents of extra water for the quality control is suggested with the consideration of the degree of durability degradation and the probable error resulted from the addition of extra water. The contents of extra water for tests are set as 0, 15, 25, 35 kg/$m^3$. To examine the durability degradation of concrete, freezing and thawing, carbonation, chloride penetration and compressive strength are tested.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.161-168
• /
• 2016

Thanks to mass production and provision of smartphones and the HMD (head mounted display), VR (virtual reality) is now being applied to various areas. The VR HMD is the interface equipment which allows users to have realistic experiences through human sensory organs such as vision and auditory sense. Since the majority of VR equipment is operated by the display for both eyes, 360-degree video content and the depth information, the VR mechanism is closely related to human senses, especially vision. Previous studies have focused on how to minimize negative impact such as motion sickness or visual fatigue. Little attention has been paid on research about the visual treatment. Therefore, the focus of this study is to develop technical elements for utilization of vision therapy with the VR HMD and explore possible areas to apply it. To this end, we analyzed the past case studies and technical elements to identify 16 areas for vision therapy. We also developed the optical parameters for utilization of the VR HMD visual targets. The result of this study is expected to be utilized for development of visual targets for vision therapy based on the VR HMD.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.7-11
• /
• 2014

Recently, the buffer layers consisting of poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT-PSS) are extensively used to improve power conversion efficiency (PCE) of organic solar cells. However, PEDOT-PSS is not suitable for mass production of organic solar cells due to its intrinsic acid and hygroscopic properties. Moreover, because of chemical reactions between indium tin oxide (ITO) layer and PEDOT-PSS layer, the interface is not stable. For these reasons, alternative materials such as $V_2O_5$ have been developed to be an effective buffer layer. In this work, we used $V_2O_5$/Ag/ITO multilayer structure for the anode buffer layer. With variation of thickness of Ag layer, we investigated the optical and electrical properties of $V_2O_5$/Ag/ITO multi-layer films. As a result, we found that the electrical properties were improved with increasing Ag thickness while optical transmittance decreases in visible wavelength region. From the calculation of figure of merit (FOM) which is used to evaluate proper structure for transparent of optoelectronic, $V_2O_5$/Ag/ITO multilayer electrode was optimized with 4 nm thick Ag layer in optical (88% in transmittance) and electrical ($4{\times}10^{-4}{\Omega}cm$) properties. This indicates that $V_2O_5$/Ag/ITO multilayer electrode could be a candidate for the anode of optoelectronic devices.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.180-186
• /
• 2004

This study was carried out to obtain the fundamental data for the mass seedling production of grunt, Hapalogenys nitens in terms of the natural spawning and some characteristics of the eggs spawned. The wild grunt were reared at indoor tanks for three years. The adults spawners were 34.0∼44.0 cm (38.6$\pm$4.0 cm, n=7) in total length, 1.00∼2.23 kg (1.62$\pm$0.50 kg, n=7) in body weight. Spawning were observed 9 times from September 22 to October 1, 2000 and 37 times from August 22 to October 3, 2001, with a water temperature range of 19.8$\pm$28.5$^{\circ}C$. The total number of eggs collected was 2.29${\times}$10$^{7}$ (1.7${\times}$10$^{3}$/ml). The relative proportion of floating eggs to total eggs was 41.7%. The fertilization rate of floating eggs was ranged between 85.0 and 99.9% and the hatching rate was ranged between 2.9 and 93.0%. Fertilized eggs were buoyant and spherical in shape, and were 0.85∼0.98 mm in diameter. Each egg contained 1-5 oil globules which were, 0.18∼0.25 mm in diameter. The incubation time from fertilization to blastodisc formation was 10 minutes, to blastula was 3 hours, and to the hatched larvae at 26$^{\circ}C$ was 20 hours 30 minutes. The newly hatched larvae attained total length of 1.81$\pm$0.18 mm. The time required from fertilization to hatching was 31∼34 hours at 23$^{\circ}C$ and 17∼20 hours at 29$^{\circ}C$.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.329-332
• /
• 2004

This experiment was conducted to investigate pathogenicity of Spodoptera exigua nucleopolyhedrovirus (SeNPV) with different temperatures for mass production. In laboratory condition, $LC_{50}$ values of SeNPV were $9.797{\times}10^{3}PIBs/mL$ at $20^{\circ}C$ and $3.351{\times}10^{2}PIBs/mL$ at $32^{\circ}C$ in 2nd instar larvae. $LC_{50}$ of the other larval stage were similar to that of 2nd instar. $LT_{50}$ values of SeNPV was 9.0 days in $1.0{\times}10^{3}PIBs/mL$ but 6.9 to 3.5 days in $1.0{\times}10^{4-6}PIBs/mL$ against 3rd instar of Spodoptera exigua. $LT_{50}$ Values of $1.0{\times}10^{4}PIBs/mL$ were 5.7, 5.5 and 4.9 days in 24, 28 and $32^{\circ}C$, respectively. As a results, $LT_{50}$ was shortened with increase of temperatures up to $32^{\circ}C$ and also dependent on viral concentration and larval instars.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.105-125
• /
• 1992

The research, aiming an automatic pattern design of Korean Costume by utilizing CAD system, tried Grading, Seaming and Marking with a theme of girl's color-strip blouse & skirt. The content & conclusion of the research can be outlined as follows; 1) As we reviewed the current situation of Korean costume which becomes more likely celebrational or festival costume, while the demand of it is getting increase, it's being dealt mostly as ready-made dresses with different qualities & designs. Especially childrens ready-made ones were highly demanded to be picked up as the theme. 2) For the original drawing of children's color-strip blouse & skirt, Kyung-Ja Park's drawing method was used here, and for the substitute of particular body parts absolute size, Joo-Won Lee's standard size chart from a size-study by ages. 3) To work with CAD system we had input master pattern, drawn for age 5 as basic size, then graded six step-sizes for 1-11 years old. For add-subtract of particular body parts size, we graded through computing the standard variation among items to get the pattern developed into ready-made standard size, we can make precise plotting by grading wanted size very rapidly if we correct the rule of changed items different from standard size to make utilization possible enough with easy order method of ready-made Korean Dress. 4) We produced Marker after attaching a margin to seam accordingly by parts for each pattern using P/D/S to mark, In mass gament-cutting, the loss of time and material can minimized. In this research the apparel CAD system which has been utilized and only be western fashion industry was introduced for the design of ready-made Korean costume and utilized it in Grading, Marking which are critical steps to improve productivity and have reported the result in the research. Thus we expect that less cost, improved productivity and better quality with minimized loss of material from marking as well as from prompt and precise size-drawing. Furthermore the utilization of CAD system is considered as an effective one in terms of the research & the development to remove effective one in terms of the research & the development to remove irrational elements in the design and production process of Korean costume as well as in terms of the study of Korean Costume development through creative works of Korean Costume.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.45-49
• /
• 1972

The following are some results obtained from a series of experiments in rotifer culture and its usage for the food of tiny fish fry: 1, Outdoor concrete ponds, each being $16m^2$, were used to culture the rotifers, Brachionus calyciflorus, and Filinia longiseta. Brachionus calyciflorus usually attained the population of about 100 individuals per ml of pond water. Dipterex was usually applied to control Daphni,a and other crustaceans that generally appear and feed on rotifers. A concentration of 0.16 to 0.2 ppm in the pond water was sufficiently effective to control these natural enimies of rotifers. Poultry dung was very effectively used to multiplicate rotifers. The fertilization ratio was about 8 kg each pond with 30cm depth of water. 2. The tiny rotifer, Filinia longiseta attained a very high population density of about 1,000 individuals per ml of pond water, but they were very sensitive to dipterex, and for this aspect future investigation may be needed. 3. In the outdoor ponds, the multiplication of rotifers significantly decreased when the water temperature falls to about $20^{\circ}C$ in autumn. 4. In the laboratory room, unicellular planktonic algae such as Scenedesmus or Chlorella, as the food of rotifers, were collected from the outdoor ponds by dipping them together with water, and were effectively used for the culture of Brachionus calyciflorus. If the planktonic algae are cultured in specially designed containers, the sun-light would be the most effective means as the source of light. 5. Brachionus calyciflorus cultured in the outdoor ponds by the dipterex controlled method was highly efficient to rear the early fry of marble gourami. The dipterex content mixed in the water to control the crustacean emmies of rotifers sieved no harm to the gourami fish fry.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.2
• /
• pp.91-97
• /
• 1994

To improve the productivity of peroxidase (POD) of cell line SP-47 derived from cell suspension cultures of sweet potato (Ipomoea batatas (L) Lam.cv White Star), we optimized culture conditions including the composition and concentration of plant growth regulators and carbon source, and the cell inoculum size. When one g (fr wt) of cells was inoculated into 50 mL TL medium supplemented with l mg/L 2,4-D and 30g/L sucrose in 300 mL Erlenmeyer flask at 25$^{\circ}C$ in the dark (100rpm), the POD activity per g cell dry wt was maximized to be about 6,800 units after 25 days of subculture, which was about 30 times higher than that of intact roots of horseradish plants grown in the greenhouse, but the cell growth was maximum after 15 days of subculture. The protein content per g cell dry wt maintained almost plateau and after 25 days of subculture decreased as culture Proceeded further whereas the POD specific activity (unit/mg protein) was about two times higher after subculture and continuously increased from 12 days to the end of cultures (40 days). The POD isozyme patterns showed almost the same regardless of cell growth stage, but some acidic isozymes were slightly increased after 25 days of subculture. These results indicate that POD activity in suspension cultures of sweet potato is closely associated with cell growth and stresses derived from cell culture renditions and medium depletion. Due to its high POD activity the SPL47cell line seems to be suitable for the mass production of POD.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.1-6
• /
• 2009

A study was conducted to investigate in vitro micro propagation of four potato cultivars of Daese, Jasim, Chubaek and Haryeng in MS medium and PM medium (a medium containing half concentration of $NH_4NO_3$ and $KNO_3$, two fold concentration of $CaCl_2$ as compared to MS medium). During $1{\sim}2$ weeks of culture, Daese and Jasim showed better shoot elongation on the solid MS medium than Chubaek and Haryeng whereas Chubaek and Haryeng did better shoot elongation on the solid PM medium. But no difference was observed after 4 weeks of culture. As compared to shoot elongation on the solid medium, it was delayed at early stage of culture in the liquid medium without shaking. Shoot formation ratio of potato (above 4 cm of shoot length) began to increase significantly after 1 week of culture and kept on increasing until 4 weeks. The four cultivars showed the different patterns of shoot growth in bioreactor. The PM medium with a quarter salt strength was effective for the regeneration of axillary buds as well as shoot elongation of Jasim and Chubaek. Daese showed vigorous regeneration of axillary buds in the PM medium with a half salt strength. On the other hand, Haryeng showed slower growth than the other three cultivars.