• 사상체질의학회지
• /
• 제32권3호
• /
• pp.33-45
• /
• 2020

Object Although Taeeum and Soyang constitutional types have bigger body shapes and higher body mass index values than those with the Soeum, the relationship between the Sasang constitutional type and bone mass density is controversial and the association of osteopenia and osteoporosis remains unknown. Therefore, we investigated the relationship between bone mineral density, osteopenia, and osteoporosis according to Sasang constitutional type. Methods A total of 2,508 participants were included in this study. Among the study participants, 1,396 had Taeeum type, 276 had Soeum type, and 836 had Soyang type, respectively. The relationships to bone mass density, osteopenia, and osteoporosis in those with Sasang constitutional type were estimated using logistic and linear regression models. Results Bone mass density was significantly higher in the order of Taeeum, Soyang, and Soeum group (p < 0.01). Soeum group in comparison with Taeeum or Soyang group was significantly associated with a high odds ratio for osteopenia and osteoporosis except in the hip and femoral neck in the comparison of Taeeum and Soeum group (p < 0.01). Moreover, the bone mass density of Soeum group decreased more rapidly as the age increased when compared with Taeeum and Soyang group. Conclusions Our findings may contribute to the early prevention and management of high-risk individuals with poor bone mass density, osteopenia, and osteoporosis using Sasang constitution medicine.

• 대한기계학회논문집B
• /
• 제33권6호
• /
• pp.427-434
• /
• 2009

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The numerical simulations for five different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermoaerodynamic performance for five different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, volume and area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 %, and the value of maximum ratio of Nusselt number augmentation is 7.05% when the riblet angle is $60^{\circ}$. The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum volume and area goodness factors are obtained when the riblet angle is $60^{\circ}$.

• 에너지공학
• /
• 제11권1호
• /
• pp.26-33
• /
• 2002

본 연구에서는 butterfly valve주위의 비압축성 및 압축성유동 특성을 수치해석을 통하여 조사하였다. 밸브는 문제를 단순화시키기 위하여 평판 디스크로 간주하였으며, 다양한 디스크 각도 및 압력비 변화에 대한 계산을 수행하였다. 각도가 증가함에 따라 디스크 상류면의 정체점은 디스크의 중심으로 이동하는 것을 볼 수 있었고, 입구공기의 유입 속도는 감소함을 볼 수 있었다. 최고 유속은 디스크와 벽면사이에 형성되는 vena contracta 효과에 의해 생기는 목의 하류에서 형성됨을 볼 수 있었다. 압력비를 감소함에 따라 압축성 효과는 증대되며 유동이 초음속화 되면서 생성되는 강한 wall jet에 의해 shock cell structure가 형성되는 것을 볼 수 있었다. 입구유량은 디스크 각도와 압력비의 증가에 따라서 감소하며, 압력손실계수는 디스크 각도의 증가 및 압력비의 감소에 따라 증가하였다.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.56-65
• /
• 2007

기존의 단열 시스템, 지하동굴 건설기술과 새로운 동결링 방벽기술을 결합하여 암반동굴식 지하 LNG 저장시스템이 개발되었다. 이 저장시스템의 기술적 적합성은 파일럿 동굴 실증시설의 건설과 운영을 통해 검증된 바 있으며, 조만간 실규모 프로젝트가 시작될 예정이다. LNG 저장시스템에서 중요한 사항 중의 하나는 극저온 열전달을 통해 장기간의 운영 기간동안 열손실을 최소화하는 것이다. 이 논문은 지하 LNG 저장 시스템의 설계를 위한 몇 가지 중요한 열전달 해석 결과를 제시하며, 기화율, 단열재 두께와 같은 설계 변수를 결정하기 위해 일련의 실규모 동굴에 대한 열전달 및 열-수리 해석을 실시하였다. 열-수리 연계해석결과 LNG 저장시설의 기화율은 초기 단계에서 0.04 %/day로 떨어져 유지되는 것으로 나타났다. 이 값은 암반내 존재하는 불연속면을 고려할 때 더욱 낮아질 수 있을 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2465-2470
• /
• 2008

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The Numerical simulations for the 5 different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermo-aerodynamic performance for the 5 different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, Volume and Area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 [%], and the value of maximum ratio of Nusselt number augmentation is 7.05 [%] when the riblet angle is $60^{\circ}$ (Case5). The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum Volume and Area goodness factor are obtained when the riblet angle is $60^{\circ}$ (Case5).

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.33-41
• /
• 2014

초음속 터빈에서는 동익 유로에서의 질식 가능성을 줄이며, 설계 압력비를 구현할 수 있도록 한다. 하지만 동익 오버랩을 적용하면, 펌핑손실, 확산손실 등의 추가적인 손실이 동반된다. 따라서 터빈성능을 극대화하기 위한 최적 오버랩 형상을 찾기 위해 근사최적화 기법을 적용하였다. 설계변수는 동익 오버랩의 형상변수이다. 최적설계 결과, 기준모델 대비 팁 누설유량은 약 50% 감소하였으며, 정효율은 약 4% 증가하였다. 팁 오버랩 크기가 성능에 미치는 영향이 크게 나타난 반면, 허브 오버랩 크기가 성능에 미치는 영향은 작게 나타났다.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.32-45
• /
• 2020

The problem of determining the discharge rates of gases from pressurized vessels through pressure relief devices was dealt with comprehensively. First, starting from basic fluid flow equations, detailed modeling procedures were presented for isentropic nozzle flows and frictional flows in a pipe, respectively. Meanwhile, physical explanations were given to choking phenomena in terms of the acoustic velocity, elucidating the widespread use of Mach numbers in gas flow models. Frictional flows in a pipe were classified into adiabatic, isothermal, and general flows according to the heat transfer situation around the pipe, but the adiabatic flow model was recommended suitable for gas discharge through pressure relief devices. Next, for the isentropic nozzle flow followed by adiabatic frictional flow in the pipe, two equations were established for two unknowns that consist of the Mach numbers at the inlet and outlet of the pipe, respectively. The relationship among the ratio of downstream reservoir pressure to upstream pressure, mass flux, and total frictional loss coefficient was shown in various forms of MATLAB 2-D plot, 3-D surface plot and contour plot. Then, the profiles of gas properties and velocity in the pipe section were traced. A method to quantify the relationship among the pressure head, velocity head, and total friction loss was presented, and was used in inferring that the rapid increase in gas velocity in the region approaching the choked flow at the pipe outlet is attributed to the conversion of internal energy to kinetic energy. Finally, the Levenspiel chart reproduced in this work was compared with the Lapple chart used in API 521 Standatd.

• 한국포장학회지
• /
• 제28권3호
• /
• pp.231-236
• /
• 2022

상추의 양액재배 별 생육과 수확 후 저장 특성에 미치는 영향을 규명하고자 하였다. '청치마' 상추를 이용하여, 무동력 수경재배 장치를 이용한 피트모스 배지경과 순수 담액 수경 재배의 생육을 비교하였고, 수확 후 상추의 생체중량변화, SPAD, 외관 등의 저장 특성을 검토하였다. 상추는 무동력수경재배의 배지경과 담액수경 재배 방법 간에 생육 후의 초장을 제외한 생체중, 엽수, SPAD, 수분함량, C/N율에서 차이가 없었다. 상추 재배 시 무동력 수경재배 방식을 통한 양액재배는 기존의 담액수경재배와 비교하여 생육에 무리가 없는 것으로 나타났다. 양액재배 방법에 따른 상추를 수확 후 저장 중 생체중량 감소나 외관 지수가 뚜렷한 차이를 보이지 않았다. 다만 엽록소 함량과 관계 있는 SPAD에서 저장기간이 지속됨에 따라 배지경 재배가 다소 높은 것으로 나타났다. 상추와 같은 작물이 재배적 이상이 없는 호조건에서 재배되는 경우, 수확 전 재배 방법에 따라서 수확 후 저장에 크게 영향을 미치지 않는 것으로 판단된다.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.161-171
• /
• 2024

This study aimed to investigate the effect of physicochemical properties and mix ratios of iron ore (oxide feed): coke (reductant) on the carbothermic reductions of iron ore. Coke size was fixed at ≤63 ㎛ while iron ore size varied between 150-63 ㎛ and ≤63 ㎛ respectively. Mix ratios were changed from 100:0 (reference) to 80:20 and 60:40 while the temperature, heating rate and soaking duration in muffle furnace were fixed at 1100 ℃, 10 ℃/min and 1 hour. Particle size analyzer, XRF, CHNS and XRD analyses were used for determination of raw feed characteristics. The occurrence of phase transformations from various forms of iron oxides to iron during the carbothermal reductions were identified through XRD profiles and supported with weight loss (%). XRF analysis proved that iron ore is of high grade with 93.4% of Fe₂O₃ content. Other oxides present in minor amounts are 2% Al₂O₃ and 1.8% SiO₂ with negligible amounts of other compounds such as MnO, K₂O and CuO. Composite pellet with finer size iron particles (≤63 ㎛) and higher carbon content of 60:40 exhibited 45.13% weight lost compared to 32.30% and 3.88% respectively for 80:20 and 100:0 ratios. It is evident that reduction reactions can only occur with the presence of coke, the carbon supply. The small weight loss of 3.88% at 100:0 ratio occurs due to the removal of moisture and volatiles and oxidations of iron ore. Higher carbon supply at 60:40 leads into better heat and mass transfer and diffusivity during carbothermic reductions. Overall, finer particle size and higher carbon supply improves reactivity and gas-solid interactions resulting in increased reductions and phase transformations.

• 한방재활의학과학회지
• /
• 제20권4호
• /
• pp.197-213
• /
• 2010

Objectives : The clinical trial was designed to investigate the safety and effects of Taeeumjowui-tang(Taiyintiaowei-tang) extracts on the change of the weight, body compositions, serum in obese patients. Methods : This was a 12-weeks, randomized, double blind, placebo-controlled clinical trial. Patients with a body mass index of either greater than $30kg/m^2$ or between 27 and $30kg/m^2$ with controlled hypertension, diabetes, hyperlipidemia were considered eligible. Participants of 41 obese patients were randomized either to Taeeumjowui-tang(Taiyintiaowei-tang)(23) or placebo(18). After 12 weeks of treatment, we measured anthropometric factors(weight, height, waist circumference, BMI(body mass index) etc.), abdominal fat area by CT(computed tomography)scanning, serum lipid(total cholesterol, tryglyceride, HDL-cholesterol, LDL-cholesterol), blood lever of variety(AST, ALT, BUN, creatinine etc.). Adverse events also evaluated. Results : After 12 weeks of treatment mean weight, waist-circumference, total cholesterol, LDL-cholesterol and score of KEAT-26 were significant changed in Taeeumjowui-tang(Taiyintiaowei-tang). There were no serious adverse events in either groups. Conclusions : There were limited in this study that is conducted within a short period of 12 weeks. but its weight and WC(waist circumference), WHR(waist hip ratio), total cholesterol, LDL-cholesterol and score of KEAT-26 loss effect was significant and it had few adverse events.