• 천문학회보
• /
• 제42권2호
• /
• pp.44.1-44.1
• /
• 2017

In barred galaxies, gaseous structures such a nuclear ring and dust lanes are formed by a non-axisymmetric stellar bar potential, and the evolution of the stellar bar is influenced by mass inflows to the center and central star formation. To study how the presence of the gas affects the evolution of the stellar bar, we use the mesh-free hydrodynamics code GIZMO and run fully self-consistent three-dimensional simulations. To explore the evolution with differing initial conditions, we vary the fraction of the gas and stability of initial disks. In cases when the initial disk is stable with Q=1.2, the bar strength in the model with 5% gas is weaker than that in the gas-free model, while the bar with 10% gas does not form a bar. This suggests that the gaseous component is unfavorable to the bar formation dynamically. On the other hand, in models with relatively unstable disk with Q=1.0, the presence of gas helps form a bar: the bar forms more rapidly and strongly as the gas fraction increases. This is because the unable disks form stars vigorously, which in turn cools down the stellar disk by adding newly-created stars with low velocity dispersion. However, the central mass concentration also quickly increases as the bar grows in these unstable models, resulting in fast bar dissolution in gas rich models. We will discuss our results in comparison with previous work.

• 한국분무공학회지
• /
• 제5권2호
• /
• pp.28-34
• /
• 2000

To reduce the soot and NOx simultaneously, a new system of stratified injection is developed. This system discharges stratified diesel-methanol in a D. I. Diesel Engine. Nozzle and delivery valve of conventional injection system were remodeled to inject diesel and methanol from one injector sequently. The quantity of diesel and methanol was controled precisely by micrometers mounted on the injection control lack. The real injection ratio of dual fuel was measured by volumetric ratio. We could confirm the capabilities that soot and NOx simultaneously were reduced by diesel-methanol stratified injection from the results of in-cylinder pressure data obtained from combustion experiment by stratified injection, heat release rate and mass fraction bumed.

• 한국작물학회지
• /
• 제49권4호
• /
• pp.342-348
• /
• 2004

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the $60\%$ isopropanol extract of soybean(Glycine max [L.] Merr.) seed revealed two abundant proteins with molecular masses of 19 and 10 kDa. Amino acid analysis revealed that the isopropanol-extractable protein fraction was rich in cysteine. Two-dimensional gel electro-phoretic analysis indicated that the 19kDa and 10kDa proteins had pI of 4.2 and 4.0 respectively. Peptide mass fingerprints of trypsin digests of the two proteins obtained using matrix-assisted, laser desorption/ionization-time of flight (MALDI-TOF) mass spectroscopy revealed the 19kDa protein was Kunitz trypsin inhibitor and the 10kDa protein was Bowman-Birk proteinase inhibitor. When resolved under non-denaturing conditions, the isopropanol-extracted proteins inhibited trypsin and chymotrypsin activity. Results presented in this study demonstrate that isopropanol extraction of soybean seed could be used as a simple and rapid method to obtain a protein fraction enriched in Kunitz trypsin and Bowman-Birk proteinase inhibitors. Since proteinase inhibitors are rich in sulfur amino acids and are putative anticarcinogens, this rapid and inexpensive isolation procedure could facilitate efforts in nutrition and cancer research.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1137-1143
• /
• 2006

In this study we investigated the removal characteristics of NOM and bromate formation characteristics in SOMT reactor. The system was recently developed as a novel ozone reactor and installed in SJ pilot plant. DOC values were decreased within 3% after treatment of 0.5~2.0 mg/L ozone dosage in SOMT reactor while the $UV_{254}$ value was 69% decreased at 2.0 mg/L ozone dosage. The composition of NOM was analysed by LC-OCD (Organic Cabon Detector) after ozone treatment in SOMT reactor to elucidate the variation of NOM character. Polysaccharide (more than 20,000 g/mol) fraction of NOM was decomposed while building blocks (350~500 g/mol) and neutral (less than 350 g/mol) fraction increased. Spiked bromide reacted with 0.5~2.0 mg/L ozone dosage in the SOMT reactor. The bromate formation was proportional to the ozone dosage ($R^2=0.978$) but not proportional to reaction time. The maximum concentration of formated bromate was not exceeded to 10% of spiked bromide concentration.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.7-13
• /
• 2015

Vortex tube is a thermal static device that separates compressed air into hot and cold streams. In general, the cooling efficiency of vortex tubes is lower than that of traditional air conditioning equipment and vortex tubes are mainly used for industrial spot cooling applications because of their quick responses. In this study, conical frustums are employed in the nozzle chamber to improve the cooling performance. Conical frustums can be used to decrease the ineffective mass fraction that directly passes through the cold exit without energy separation. The shape optimization of conical frustums has been performed using full factorial design. It is found that the height of frustums has the largest main effects on the cooling performance. Computational results show that the cooling performance can be increased by about 10% within the considered range of the design parameters. This is because the ineffective mass fraction toward the cold exit is decreased by about 20%.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.381-388
• /
• 2003

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to mixtures of HFC-l34a and HCFC-123 in a uniformly heated horizontal tube. Tests were run at a pressure of 0.6 MPa and in the ranges of heat flux 1-50 kw/$m^2$, vapor quality 0-100 % and mass velocity 150-600 kg/$m^2$s. Heat transfer coefficients of mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Measured data of heat transfer are compared to a few available correlations proposed for mixtures. The correlation of Jung et. al. satisfactorily predicted the present data, but the data in lower quality was overpredicted and underpredicted the high quality data. The correlation of Kandlikar considerably underpredicted most of the data. and showed the mean deviation of 35.1%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.84-91
• /
• 2003

Flow-Induced Vibration of steam generator tubes may result in fretting wear damage at the tube-to-support locations. KSNP(Korean Standard Nuclear Power plant) steam generators experienced fretting wear in the upper part of U-bend above the central cavity region of steam generators. This region has conditions susceptible to the flow-induced vibration, such as high flow velocity, high void fraction, and longer unsupported span. To improve its performance, APR1400 steam generator is designed with additional supports in this region to reduce unsupported span and to reduce peak velocity in the central cavity region. In this paper, we examined its performance improvement using ATHOS code. The thermal-hydraulic condition in the region of secondary side of APR1400 steam generator is obtained using the ATHOS3 code. The effective mass for modal analysis is calculated using the void fraction, enthalpy, and operating pressure information from ATHOS3 code result. With the effective mass distribution along the tube, natural frequency and mode shape is obtained using ANSYS code. Finally, stability ratios and real mean squared displacements for selected tubes of the APR1400 steam generator are computed. From these results, the current design of the APR1400 steam generator are examined.

• 생약학회지
• /
• 제49권3호
• /
• pp.278-284
• /
• 2018

Asimina triloba contains many kinds of annonaceous acetogenins known to have toxicity and/or activity. In this study, analysis of acetogenins was carried out on the extract and its solvent fractions of A. triloba leaves using a liquid chromatography mass spectroscopy(LC-MS). In the extract, the ethanolic extract was significantly higher acetogenin contents than hot water extract. In the analysis of solvent fraction from the ethanolic extract, n-hexane, ethylacetate, and aqueous fraction were contained 85.17~90.92%, 8.96~14.52% and 0.12~0.35% of total acetogenin in the extract. Based on these results, the analytical method is useful for comparing annonaceous acetogenins contents in plant samples. Moreover, when research or product development aiming at the physiological activity of acetogenin such as anticancer activity using A. triloba leaves is performed, a fractionation using a nonpolar organic solvents and alcohol extract may be useful methods. This method can also be used for the purpose of eliminating toxicity as well.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.330-339
• /
• 2005

An experimental study on the behavior of droplets impinging on a solid flat surface was carried out in the present study. Breakup of a liquid droplet impinging on a solid surface has been investigated experimentally for various liquids with different properties. The liquid droplet temperature and incident angle were chosen as major parameters. Liquid droplet temperature and incident angle varied in the range from $-20{\circ}C\;to\;30{\circ}C\;and\;from\;30{\circ}\;to\;60{\circ},$ respectively. It was found that the variation of droplet temperature influences upon the mean diameter and uniformity of droplets which were bounced out from the solid surface. With increase of incident angle the dispersion mass fraction increases, causing the decrease of liquid film flow rate. As the liquid temperature increases, dispersion mass fraction increases since the surface tension decreases.

• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.17-23
• /
• 2007

In the present work, flow analysis has been performed in the steam turbine bypass control valve (single-path type) for two different cases i.e., case with steam only and case with both steam and water. The numerical analysis is performed by solving three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations. The shear stress transport (SST) model and $k-{\varepsilon}$ model are used to each different case as turbulence closure. Symmetry condition is applied at the mid plane of the valve while adiabatic condition is used at the outer wall of the cage. Grid independency test is performed to find the optimal number of grid points. The pressure and temperature distributions on the outer wall of the cage are analyzed. The mass flow rate at maximum plug opening condition is compared with the designed mass flow rate. The numerical analysis of multiphase mixing flow(liquid and vapor) is also performed to inspect liquid-vapor volume fraction of bypass valve. The result of volume fraction is useful to estimate both the safety and confidence of valve design.