• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.563-567
• /
• 2002

Developing base data on luring fish schools into netting position by the use of underwater audible sound on japanese parrot fish Oplegnathus fasciatus found in the coastal waters of Jeju Island, S. Korea. Auditory threshold was determined by the heartbeat condition technique using pure tones coupled with a delayed electric shock. The audible range of japanese parrot fish extended from 80 Hz to 500 Hz with a peak sensitivity at 200 Hz. The mean auditory thresholds at the frequencies of 80 Hz, 100 Hz, 200 Hz,300 Hz and 500 Hz were 104 dB, 95 dB, 91 dB, 99 dB and 113 dB, respectively. As the frequency became higher than 200 Hz, the auditory threshold increased almost linearly with increasing frequency. Critical ratios of fishes measured in the presence of masking noise in the spectrum level range of 69$\~$78 dB (0 dB re 1$\mu$Pa/$\sqrt{Hz}$) ranged from 21 dB to 40 dB at test frequencies. The noise spectrum level at the start of masking was about 70 dB within the test frequency range. The sound pressure level of 100$\~$200 Hz recognized by japanese parrot fish under the ambient noise is above 91 dB and the critical ratio for them is above 21 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.65-70
• /
• 2000

It is blown that the loudness is one of the most important metrics in assessing the sound quality and a calculation method for loudness has been standardized for steady sounds. In this study, a new loudness model is suggested for dealing with the transient sound for a unified analysis of various practical sounds. A signal processing technique is introduced for this purpose, which is required for the band subdivision and the prediction of band-level change of transient sounds. In addition, models for the post-masking and the temporal integration are adopted in the analysis of the loudness of transient sounds. In order to solve the problem of the conventional loudness model in the pure-tone signal processing, a critical band filter is employed in the analysis, which consists of 47 critical filters having a filter spacing of a half of the critical bandwidth. For testing the effectiveness of the present model, the predicted responses are compared with the experimental data and it is observed that they are in good agreements.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2000

In order to obtain the fundamental data on the auditory thresholds of fishes for marine ranching, the auditory thresholds of black rock fish Sebastes Schlegeli were measured in the presence of masking noise in the spectrum level range of 73 - 83dB (0dB re $1{\mu}Pa/{\sqrt{Hz}}$) with a classical cardiac conditioning technique. Critical ratios were about 19 - 30dB at 80 - 300Hz and 46 - 54dB at 500 - 800Hz. The ratio increased almost linearly with increasing frequency to 500Hz. The noise spectrum level at the start of masking was about 70dB within the frequency range of 80 - 800Hz excepting 65dB at 300Hz. This suggests that hearing of the black rock fish is masked in the natural environment with the noise spectrum level above 65dB. The sound pressure level of which the signal sound of 100 - 200Hz is recognized by black rock fish under the ambient noise is above 90dB and the critical ratio of them is above 20dB.

• Smart Media Journal
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2022

With the recent development of device performance such as smartphones, cameras, and video cameras, it has become possible to obtain human biometric information from images and photos. A German hacker group obtained human iris information from high-definition photos and revealed hacking into iris scanners on smartphones. As high-quality images and photos can be obtained with such advanced devices, the need for a suitable security system is also emerging. Therefore, in this paper, we propose a method of automatically masking human iris information in images and photos using Haar Cascades and Blur models from openCV. It is a technology that automatically masks iris information by recognizing a person's eye in a photo or video and provides the result. If this technology is used in devices and applications such as smartphones and zoom, it is expected to provide better security services to users.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1195-1201
• /
• 2011

Since the release of safety standard IEC 61508 which defines functional safety of electronic safety-related systems, SIL(Safety Integrity Level) certification for railway systems has gained lots of attention lately. In this paper, we propose a new design technique of the computer board for train control systems with high reliability and safety. The board is designed with TMR(Triple Modular Redundancy) using a certified SIL3 Texas Instrument(TI)'s TMS570 MCU(Micro-Controller Unit) to guarantee safety and reliability. TMR for the control device is implemented on FPGA(Field Programmable Gate Array) which integrates a comparator, a CAN(Controller Area Network) communication module, built-in self-error checking, error discriminant function to improve the reliability of the board. Even if a malfunction of a processing module occurs, the safety control function based on the proposed technique lets the system operate properly by detecting and masking the malfunction. An RTOS (Real Time Operation System) called FreeRTOS is ported on the board so that reliable and stable operation and convenient software development can be provided.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.348-351
• /
• 1995

A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.803-807
• /
• 2018

The Fantomas and the Robin are the block ciphers included in the LS-designs, the family of block ciphers. They are designed to efficiently apply the masking technique, which is a side-channel analysis countermeasure technique, using L-boxes and S-boxes capable of bit slice implementation. In this paper, we show that the key recovery attacks of Fantomas and Robin through the related-key differential analysis are possible with $2^{56}$ and $2^{72}$ time complexity, $2^{56}$ and $2^{69}$ chosen plaintext respectively.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.425-427
• /
• 1996

New fabrication technique was developed to make three dimensional silicon microstructure with five fold vertical steps through entire wafer thickness. Each step is pre-defined on multiply stacked thermal oxide and silicon nitride (O/N) layers by photolithographies. Multi-stepped silicon microstructure is formed by anisotropic etch in aqueous KOH solution with the patterned nitride film as masking layer. Fabricated microstructure consists of four $16{\mu}m$ thick flexural spring beams, $290{\mu}m$ thick proof mass, mesas for overrange stop with $10{\mu}m$ height from the surface of the proof mass, and the other mesas and V grooves used for assembling this structure to the packaging frame of pendulous servo accelerometer. Using the numerical finite element method (FEM) simulator: ABAQUS, mechanical characteristics of the fabricated microstructure by the developed technique was compared with those of the same structure processed by one step silicon bulk etch followed by oxidation and patterning the etched region.

• Journal of Information Technology Applications and Management
• /
• v.14 no.1
• /
• pp.137-144
• /
• 2007

In this paper, we propose a rotation resistant robust logo embedding watermarking technique. Geometric manipulations make the detection process very complex and difficult. Watermark embedding in the normalized image directly suffers from smoothing effect due to the interpolation during the image normalization. This can be avoided by estimating the transform parameters using image normalization angle and moments, instead of embedding in the normalized image. Conventional rotation resistant schemes that use full frame transform. In this paper we adopt DCT and calculate masking using a spatio-frequency localization of the $8{\times}8$ block DCT coefficients. Experimental results show that the proposed algorithm is robust against rotation process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1111-1116
• /
• 2007

Antennas of the near field detection radar require little distortion in time domain caused by multi reflections between feed and open ends of the antenna, so that help to discriminate the target signal from the clutters. The resistive loading techniques have been used to reduce the late time distortions in order to prevent masking of target. In this paper, we design a microstrip antenna with two arms having sloted lines, which have inductance loading effect. Implemented antenna shows better performance on reducing late-time ringing, and the peak value of the received signal becomes 45% greater than the one by the antenna with two non-sloted lines.