• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.98-106
• /
• 2011

Establishing conservation programs to protect and maintain populations of endangered species are not only a global trend, but also a pursuit endorsed by the Korean Environmental Conservation Act. This study evaluates the feasibility of alternative habitat patches for the endangered butterfly Parnassius bremeri. A portion of habitat of P. bremeri is expected to be fragmented and damaged due to the scheduled construction of the Sangju-Yongduk Highway. A trans fer of the habitat patches of P. bremeri is also scheduled. In order to select an alternative habitat patch, the Mark-Release-Recapture (MRR) method was used to simulate a patch transfer model. The connectedness between habitat are as and the survival of local populations were evaluated for each candidate habitat. It was found that metapopulations with patch distances of <250m showed a 50% connectedness and survival rate in local populations. P. bremeri were expected to migrate at an average distance of 300m. In addition, P. bremeri formed a metapopulation that exhibited intimate patch dynamics that promoted persistence among these patches. Possible candidate habitats including those recommended by local governing bodies were evaluated along with habitats that may counter problems arising from the damage done to the original habitat and habitats that may have a compensatory value equal to that of the original habitat. Based on these criteria, Ansa-myeon township office was selected due to its high scores. This scoring was based on a consideration of a wide range of variables that mark a successful transfer of habitat. These include the amount of funding available, the governing bodies of the possible alternative habitat, and the Expected collaborative effort of local citizens. This decision was collaborated on by incorporating the expertise of various fields of study including biology, ecology, biogeography, ecological engineering, landscape architecture, and social sciences. Therefore, it is suggested that in order to evaluate an alternative habitat for organisms, many social issues as well as ecological issues must be considered.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.4
• /
• pp.24-30
• /
• 2010

The renewable energy source is considered as a good measure to cope with the global warming problem and the fossil energy exhaustion. The construction of electric power plant such as an offshore wind farm is rapidly increasing and this trend is expected to be continued during this century. The bulky and long distance power transmission media is essential to support and promote the sustainable expansion of renewable energy source. DC power cable is generally considered as the best solution and the demand for DC electric power has been rapidly increasing. Especially, the high temperature superconducting (HTS) DC cable system begins to make a mark because of its advantages of huge power transmission capacity, low transmission loss and other environmental friendly aspects. Technical contents of DC HTS cable system are very similar to those of AC HTS cable system. However the DC HTS cable can be operated near its critical current if the heat generation is insignificant, while the operating current of AC HTS cable is generally selected at about 50~70% of the critical current because of AC loss. We chose the specifications of the cable core of 'Tres Amigas' project as an example for our study and investigated the heat generation when the DC HTS cable operated near the critical current by some electric and thermal analyses. In this paper, we listed some technical issues on the design of the DC HTS cable core and described the process of the cable core design. And the results of examination on the current capacity, heat generation, harmonic loss and current distribution properties of the DC HTS cable are introduced.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.809-818
• /
• 2020

To conserve the population of a hesperiid butterfly, Leptalina unicolor, inhabiting the protected areas of Jaeyaksan, we provide ecological information on their behavior and propose habitat conservation measures, such as the creation of alternative habitats based on comprehensive information. The behavioral study used a method of re-capture after releasing the butterfly with enamel marks on the wings. Adult behaviors were shown in four patterns: flying, settling on a plant, nectar absorption, and water absorption. Both males and females had the highest proportion of flight movement overall; however, males had a slightly higher proportion of flight movement. As for duration, females spent more time settling on plants to select spawning sites, and males seemed to take a longer time for water absorption activities, to absorb minerals needed to form the spermatophore. The average travel distance of butterflies was 27.5 m for females and 46.7 m for males, with daily activity ranges from 11.2 m to 43.8 m, and 21.4 to 57.6 m, respectively. The most important condition to preserve the habitat of Leptalina unicolor is to maintain the community of Miscanthus sinensis, a food plant. Additionally, because this butterfly has a high rate of water absorption activities, wetlands should be maintained.

• Parasites, Hosts and Diseases
• /
• v.43 no.3 s.135
• /
• pp.75-92
• /
• 2005

Extensive previous studies on taxonomy, behavior/bionomics and control of Anopheles sinensis are reviewed and summarized. Recent molecular identification revealed that the population of An. sinensis complex includes An. sinensis, An. pullus, An. lesteri and at least two new species, and An. yatsushiroensis is synonmy of An. pullus. An. sinensis is the main vector specie of vivax malaria in Korea. Larvae of An. sinensis breed in wide range of habitats which are naturally-made clean water, stagnant or flowing; main habitats include rice fields, ditches, streams, irrigation cannals, marshes, ponds, ground pools, etc. Their host preferences are highly zoophilic. Human blood rate is very low ($0.7-1.7\%$); nevertheless An. sinensis readily feeds on man when domestic animals are not found near by. They feed on hosts throughout the night from dusk to dawn with a peak period of 02:00-04:00 hours; they are slightly more exophagic (biting outdoors); much larger numbers come into the room when light is on. Main resting places are outdoors such as grasses, vegetable fields and rice fields. A mark-release-recapture study resulted that $37.1\%$ was recaptured within 1 km, $29.4\%$ at 1-3 km, $21.1\%$ at 3-6 km, $10.3\%$ at 6-9 km and $2.1\%$ at 9-12 km distance. An. sinensis hibernate outdoors (mostly under part of dense grasses) during October-March. At the end of the hibernation period (March-April) they feed on cows at daytime. Until today any single measure to effectively control An. sinensis population has not been found. Indoor residual spray with a long-lasting insecticide can not reduce vector population densities, but shorten their life spans in some degree, so contributes to malaria control.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.87-92
• /
• 2010

With recent localized heavy rain, the collapsing accident of the cut slopes occur repeatedly every year. The maintenance of the cut slopes is very crucial as the collapsing of cut slopes causes various calamities such as human causalities and sweeping away of the roads. By looking at the study of current situation of the cut slopes, designed for maintenance of cut slopes, the locations of the damaged districts are hard to figure out as they are represented through distance mark and longitude and latitude. In this paper has used NDGPS methods and VRS service through GPS signal corrections that are received by DGPS standard department to correctly analyze the exact location and the shape of the slope. The result of this analysis shows that both methods produce similar shape of the slope. Therefore, these two methods, NDGPS methods and VRS service, can be applied to other analysis of cut slopes in different areas.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.291-303
• /
• 2020

The deformation of the rock surrounding a tunnel manifests due to the stress redistribution within the surrounding rock. By observing the deformation of the surrounding rock, we can not only determine the stability of the surrounding rock and supporting structure but also predict the future state of the surrounding rock. In this paper, we used grey system theory to analyse the factors that affect the deformation of the rock surrounding a tunnel. The results show that the 5 main influencing factors are longitudinal wave velocity, tunnel burial depth, groundwater development, surrounding rock support type and construction management level. Furthermore, we used seismic prospecting data, preliminary survey data and excavated section monitoring data to establish a neural network learning model to predict the total amount of deformation of the surrounding rock during tunnel collapse. Subsequently, the probability of a change in deformation in each predicted section was obtained by using a Bayesian method for detecting change points. Finally, through an analysis of the distribution of the change probability and a comparison with the actual situation, we deduced the survey mark at which collapse would most likely occur. Surface collapse suddenly occurred when the tunnel was excavated to this predicted distance. This work further proved that the Bayesian method can accurately detect change points for risk evaluation, enhancing the accuracy of tunnel collapse forecasting. This research provides a reference and a guide for future research on the probability analysis of tunnel collapse.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4903-4929
• /
• 2018

In this study, a fully automatic pose and expression invariant 3D face alignment algorithm is proposed to handle frontal and profile face images which is based on a two pass course to fine alignment strategy. The first pass of the algorithm coarsely aligns the face images to an intrinsic coordinate system (ICS) through a single 3D rotation and the second pass aligns them at fine level using a minimum nose tip-scanner distance (MNSD) approach. For facial recognition, multi-view faces are synthesized to exploit real 3D information and test the efficacy of the proposed system. Due to optimal separating hyper plane (OSH), Support Vector Machine (SVM) is employed in multi-view face verification (FV) task. In addition, a multi stage unified classifier based face identification (FI) algorithm is employed which combines results from seven base classifiers, two parallel face recognition algorithms and an exponential rank combiner, all in a hierarchical manner. The performance figures of the proposed methodology are corroborated by extensive experiments performed on four benchmark datasets: GavabDB, Bosphorus, UMB-DB and FRGC v2.0. Results show mark improvement in alignment accuracy and recognition rates. Moreover, a computational complexity analysis has been carried out for the proposed algorithm which reveals its superiority in terms of computational efficiency as well.

• The Korean Journal of Zoology
• /
• v.21 no.2
• /
• pp.59-66
• /
• 1978

A dispersal experiment on Culex tritaeniorhynchus females by a mark-release-recapture method was carried out at Pohgang city, Korea, in Augst 1974. The results are summarized as follows: 1. Of 23,115 females of C. tritaeniorhynchus released, 120 females were recaptured, giving 0.519% recapture rate and 0.00208 recovery ration. 2. Dispersal rates from the release site were 77.5% in 0-2km, 11.7% in 4-6 km and 5.8% in 6-8km. 3. C. tritaeniorhynchus females flew 7.5km in one day. The average of the daily mean distances was 1.55km, and it showed that the dispersal distance did not correlate with days after release.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1121-1121
• /
• 2001

A previous study (Berzaghi et al., 2001) evaluated the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural networks (ANN) on the prediction of the chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with reference values for moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected using 10 different Foss NIR Systems instruments, only some of which had been standardized to one master instrument. The aim of the present study was to evaluate the behaviour of these different calibration methods when predicting the same samples measured on different instruments. Twenty-two sealed samples of different kind of forages were measured in duplicate on seven instruments (one master and six slaves). Three sets of near infrared spectra (1100 to 2500nm) were created. The first set consisted of the spectra in their original form (unstandardized); the second set was created using a single sample standardization (Clone1); the third was created using a multiple sample procedure (Clone6). WinISI software (Infrasoft International Inc., Port Mathilda, PA, USA) was used to perform both types of standardization, Clone1 is just a photometric offset between a “master” instrument and the “slave” instrument. Clone6 modifies both the X-axis through a wavelength adjustment and the Y-axis through a simple regression wavelength by wavelength. The Clone1 procedure used one sample spectrally close to the centre of the population. The six samples used in Clone 6 were selected to cover the range of spectral variation in the sample set. The remaining fifteen samples were used to evaluate the performances of the different models. The predicted values for dry matter, protein and neutral detergent fibre from the master Instrument were considered as “reference Y values” when computing the statistics RMSEP, SEPC, R, Bias, Slope, mean GH (global Mahalanobis distance) and mean NH (neighbourhood Mahalanobis distance) for the 6 slave instruments. From the results we conclude that i) all the calibration techniques gave satisfactory results after standardization. Without standardization the predicted data from the slaves would have required slope and bias correction to produce acceptable statistics. ii) Standardization reduced the errors for all calibration methods and parameters tested, reducing not only systematic biases but also random errors. iii) Standardization removed slope effects that were significantly different from 1.0 in most of the cases. iv) Clone1 and Clone6 gave similar results except for NDF where Clone6 gave better RMSEP values than Clone1. v) GH and NH were reduced by half even with very large data sets including unstandardized spectra.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.411-419
• /
• 2012

The lure-distance of Riptortus pedestris aggregation pheromone was elucidated and the damage mitigation effect by mass trapping of R. pedestris was examined in commercial soybean fields. The recaptured ratio showed that 76.1% of total recaptured individuals were lured within 40 m and 89.0% of total recaptured adults were arrested in the lower 80 m. There is not much difference in the number of recaptured individuals according to the location of installed traps in the experiment. There was linear correlation between the total installed number of traps and the total number of trapped individuals in commercial soybean fields. and the highest yield (261.8 g/10 stems) was investigated in the field that had installed a pheromone trap per $770m^2$. No relationship wasf found between the covered areas of a pheromone trap for mass trapping and yield loss. The ratio of type A seed (healthy) was higher in the field that installed a trap per $385m^2$ and $770m^2$ (around 62%) and type B seed (showing distinct injury marks) was lower in the same fields (around 27%). From this result, we could reduce slightly the damage of soybean seeds by the mass trapping of Riptortus pedestris adults with an aggregation pheromone trap per $385{\sim}770m^2$ area range.