• Journal of the Korean Geographical Society
• /
• v.48 no.6
• /
• pp.837-855
• /
• 2013

The remains and relics such as wood vessel, shell middens and acorn hollows related to marine environments were excavated at Bibong-ri, Changnyeong-gun, Gyeongsangnam-do, South Korea, approximately 70km apart from the Nakdong River mouth. The sea-level changes were reconstructed based on characteristics of shell middens and acorn hollows, sedimentary facies, AMS dating, and diatom analysis. The shell middens and acorn hollows were constructed during the early Neolithic Age and provide information on the paleo-sea level, because of influences of marine processes. The sedimentary facies are classified into a bedrock, base gravel and Holocene sediment (marine, terrestrial and back marsh sediments), upward. The sea level fluctuated during the middle Holocene is in harmony with those in Sejuk-ri, Ulsan and Pyeongtaek. In particular, the sea level at Bibong-ri of study area was higher than the mean high tidal level in Gimhae by approximately 1m during 5,000yr BP and maintained the stable condition during 4,000yr BP.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.558-563
• /
• 2014

In order to reduce the risk of deaths from hypothermia at sea, this paper suggests the performance criteria of life rafts for small fishing vessels less than 20 m in length. In our country, the life rafts are not used and have no performance criteria. This research compared the performance criteria of the domestic, foreign, international standards, and the performance comparison between foreign life rafts and the user-friendly valise prototype(2 & 4 persons) which is developed by this study. As a result, it is considered to be appropriate that ISO 9650-1 can be applied to the life rafts for offshore fishing vessels while a milder criteria can be applied to the life rafts for coastal fishing vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.179-185
• /
• 2014

A use of Asbestos onboard was banned by the provisions of SOLAS since 1 January 2011. And this provision was also implemented by the Rule for Ship's Facilities in Korea. However, these provisions were only declaration and there were no detailed measures for detect, removal and confirmation. In this study, by reviewing the Ship Recycling Convention, IMO circulars and Asbestos Safe Management Act, the following strategies for each concerned parties were proposed. The administration and class society should establish the provisions for appointment of subject vessel which to be inspected for asbestos, criteria for asbestos management and appointment of handling expert. The shipbuilder and equipment manufacturer should make written confirmation that asbestos was not used in their product. And shipowner and ship manager should establish procedure for onboard control of asbestos in the ship's safe management system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.503-512
• /
• 2017

Over the past few years, as maritime trade and traffic were highly expanding, problem of invasive species via ballast water have been raised. In 1988, Canada and Australia had firstly experience that unexpected and hazardous species were observed on their own sea, they have issued the problem to MEPC under the IMO. At the end of many years of discussion, on the diplomatic conference in 13 Feb. 2004, "International Convention for the Control and Management of Ballast Water and Sediments of the Ship" was adopted. Requirements for entering into force of this Convention is that 30 countries ratify and world merchant marine fleet is more than 35% and BWM Convention will be effected after 12months from date satisfying conditions. With Finland ratifying the BWM Convention on 8 Sep. 2016, the fleet amounted to 35.1441% and ratification country became 52 countries. Therefore, after 12month, BWM Convention will be formally effected on 8 Sep. 2017. Ballast Water Treatment System is to be fitted in new ships as well as existing ships. Thus, there are concerns of ship owners to be suitably installed a variety typed BWTS in many kinds of vessels. As approaching for resolving these problems, engineering analysis was carried out research studies and detailed design to analyze to optimal installation space for retrofitting a BWTS using 3D Scanning method, targeting representative DWT 180K Bulk carrier of dry cargo vessels charged more 40% on worldwide vessel and mainly two type BWTS as electrolysis treatment type and ultra violet treatment type. Optimal design of 3D Scanning technology was applied to analyze four step process and the overall conclusion was described in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.191-200
• /
• 2000

The marine accident is being highlighted as a serious worldwide problem for the guard station of human safety and the protection of marine environment pollution. Especially, the GMDSS is operated as a international rule for the safety of a large scale ship, but the small size ship's management is required a adaptive national rule because of the complex condition of national circumstance. This study is motivated to develop a ship's position tracking system combined with GPS information for VTS and control the ship navigation, velocity and longitude etc.. In Part of Navigation Data Transmission is GPS data transmission whih ship's ID using microprocessor and TX speed translation for flexibility with 4800∼2400 [bps]. Results show that the our system for data transmission using microprocessor is useful tool in maritime transmission as SSB used the main TX method of small ship and has a cost competitive power. Therefore, we will expected cost and technical competitive power compared to AIS. But those systems are still remained the unsolved problem for protection from marine accident.. Finally, we examined the semi-actual receiving state on simulated sailing in the around sea of Mok-Po harbor.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.203-209
• /
• 2003

In this study, the configuration and tension of a towing cable for side-scan sonar are predicted in an ambient flow and at an unsteady towing condition. The governing equation of three-dimensional dynamic analysis for a flexible cable is solved using a finite difference method. We successfully predict the configuration and tension of a side-scan sonar and designed the towing system. It is found in static analyses that the side-scan sonar must be towed to keep a its stable depth at a reasonable speed. The study also reveals in the transient analyses that the dominant component affecting the top tension is the tangential drag force for the larger towing speed than the critical speed, and the soft weight of a towed instrument for the smaller towing speed than. It should be maneuvered for a towing vessel with good consideration for the impact effect in a cable due to tension peak when a towing speed is suddenly increase. The developed program can be applicable for three-dimensional dynamic analysis of a towing system for various marine survey instruments.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.43-49
• /
• 2006

The hull form of icebreaking tanker depends on the trade route and ice characteristic. The hull form has to be designed for icebreaking concept if the vessel is operating in heavy ice and also the hull from has to be optimized for general tanker when the ship is operating in ice-free ocean. This paper presents comparison of ship resistance in pack ice, level ice and open water. Four ships are used to compare the resistance characteristic. One is conventional tanker and three ships are icebreaking tankers. The ice model test was carried out at the IOT (Institute for Ocean Technology, Newfoundland, Canada) and open water test was performed at 55MB (Samsung Ship Model Basin). The ice resistance of conventional tanker was predicted by Colbourne's method. The resistance of open water, pack ice and level ice are compared and discussed. The best hull form of icebreaker is not good in open water performance compare to conventional tanker. This result explains that the hull form of icebreaker and normal tanker have to compromise when the ship is operated in ice and ice-free condition. The result of this paper gives a guide for icebreaking tanker design.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.856-866
• /
• 2021

The increasing international awareness regarding air pollutant reduction has resulted in increasing demand for eco-friendly ships; hence, electric ships are being actively developed by various countries. Presently, studies on electric ships are mainly focused on electric propulsion systems and electric motors. However, from the ship perspective, there are no studies on conceptual designs for coastal car ferries powered by removable power supply systems. In the present study, the main research consideration is regarding the conceptual design of a fully electrified car ferry using a battery-based removable system as the main power source. By analyzing the dimensions of more than 100 domestic coastal car ferries, the main criteria satisfying the requirements for developing a suitable vessel were derived, and a study on intact/damage stability was conducted considering the application of a removable battery truck. Further analyses of the problems concerning the conceptual design were also performed to derive solutions.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.881-889
• /
• 2022

As interest in environmental pollution caused by ship emissions is increasing worldwide, many studies are being conducted on the development of systems that increase energy efficiency to reduce ship emissions. In order to test the energy management system controller driven in real time on a large ship, it is necessary to perform the test through the simulator. In this study, addresses were set for each signal according to Modbus TCP/IP so that each control system and energy management system could be linked, and the algorithm was configured according to the signal flow. In addition, the signal generator was designed and manufactured so that each controller could artificially generate the signal collected from the vessel. As a result of the simulator production and interlocking, it was confirmed that each controller operated in real time performed its role appropriately, and that the algorithm of the ship energy management system was properly applied.