• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1581-1590
• /
• 2016

In order to reduce the risk of death from hypothermia for the fishing vessel's crew at sea, this paper suggests that the criteria of equipment of fishing vessels should be revised for fishing vessels engaged in coastal and inshore fisheries to be equipped with the immersion suit. The criteria of equipment of fishing vessels for immersion suits was amended to reflect the sinking of No.501 Oryongho but it was only reflected in ocean fisheries at Bering sea and Antarctic ocean that immersion suits must be provided with the same number of the total number of crew on board. Therefore, this paper analyses the relationship between maritime accident of fishing vessels and weather condition based on sea water temperature to find out the risk of hypothermia and also compares the international conventions(SFV Protocol 1993, Cape Town Agreement 2012, STCW-F 1995 and SOLAS 1974) and domestic law concerning criteria of equipment of fishing vessels. As a result, fishing vessels engaged in coastal and inshore fisheries are exposed to the risk of hypothermia when they are in distress and the criteria of equipment of fishing vessels should be amended to provide the immersion suits in accordance with the revision trend of international conventions.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1761-1771
• /
• 2016

In respect of the existing relation between Sea-going Vessels and Vessels at anchor, Korean Maritime Safety Tribunal has applied 'Ordinary Practice of Seamen' that is regulated by the article No. 2 of COLREG. That is, general navigation rule is not applied between the two vessels, and the action to avoid collision of vessels by utilizing experience knowledge of the seamen. However, the content of the Ordinary Practice of Seamen included in the revised plan in the process of 2011 "Maritime affairs Safety Act" revision was deleted in the screening of the Office of Legislation due to the reason that it could not specified when the content of deed is not concertized. Furthermore, prior application regulation of international treaty included in the existing "Sea Traffic Safety Act"(Article 5) was deleted in the screening of the National Assembly. So, doubt about whether the Ordinary Practice of Seamen could be continuously applied according to the regulation of the international treaty, nevertheless not specified in domestic law, has been continuously raised. In this situation, recently Central Maritime Safety Tribunal changed precedent by applying of Article 96(3) of Maritime Safety Act without applying Ordinary Practice of Seamen in the Case No. 2015-001. Accordingly, this study intended to review propriety of precedent change and legal issue with the decision of Central Maritime Safety Tribunal excluding Ordinary Practice of Seamen for a collision between Sea-going Vessels and Vessels at anchor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.858-866
• /
• 2019

In line with the transformation of the shipping industry, the number of mixed-manning ships is on the rise - bringing foreign sailors aboard with their local sailors. During on-board work, a culture is formed according to mixed-manning, which leads to changes in on-board living environment. This causes various problems such as communication problems, and lack of education and training. In order to identify and solve problems caused by mixed-manning, this study presented a plan for systematic education of foreign seafarers. The officials in charge of the affairs of foreign sailors conducted questionnaire surveys at various shipping lines. The questionnaire survey results were analyzed using the IBM SPSS Statistic 26 program. Three improvement measures were proposed to solve the problems after identification of the types of education, education methods, and problems of foreign employees. This study revealed that it is imperative to systematize related education of foreign seafarers based on the results of the survey.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.168-172
• /
• 2005

An autopilot system of a ship is very important for a safe and convenient navigation, which is realized with getting an azimuth data from a gyrocompass, a magnetic compass and a GPS(Global Positioning System) compass. Magnetic compass an azimuth error is generated by a vessel magnetism material such as steels. The magnetic pole is detected by the magnetic field sensor, it does not coincide with the true north, therefore, the detected azimuth data can not but accompany error. In this paper, in order to detect the minimum change of azimuth data which generates errors of azimuth information, a search algorithm using the Kalman Filtering method is utilized. The digital electronic compass is designed with the integration algorithm using the merits of an earth's magnetic field sensor and a GPS receiver.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2189-2196
• /
• 2015

According to increase environmental pollutions and fuel costs, The study of energy saving in the ship is proceeding actively. PCS is pump control system for cooling system in the ship to improve the energy efficiency by controling rotation speed of sea water pump, fresh water pump and position of 3way valve. In this paper, we develop the PCS simulator that has an environment similar to the cooling system of the actual vessel to ensure reliability of the PCS. Also, PC-based control and data storage system for PCS simulator is developed. To develop this system, National Instrument's cDAQ and LabVIEW are used. Finally, confirm the behavior of the simulator by analyzing the saving data.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1162-1167
• /
• 2006

The discharge of ballast water from the marine vessel without proper treatment causes the ecological disruption. Therefore, International Marine Organization(IMO) has the plan to force the proper treatment of ballast water before its discharge to open sea. To satisfy the IMO's criteria, several processes such as filtration, UV irradiation, and ozonation etc., were introduced. Since the disinfection of ballast water should be conducted within very short hydrolic retention time, electrochemical treatment can be a promissing process. The DSA(dimensional stable anode) electrode for the electrochemical treatment was prepared by thermal deposition method. The disinfection rate of microorganisms increased with the increasing current density and reaction time under low pH condition. The morphology of sterilized microorganisms was shown by SEM and Microscopy.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.192-200
• /
• 1999

This paper describes experimental investigations of helium-air exchange flow through parti-tioned opening. Such exchange flow may occur following rupture accident of stand pipe in high temperature gas cooled reactor. A test vessel with a opening on top of test cylinder is used for experiments. An estimation method of mass increment is developed and applied to measure the exchange flow rate. A technique of flow visualization by Mach-Zehnder interferometer is provided to recognize the exchange flows. Flow measurements are made with partitioned opening for parti-tion rations $H_p/H_1$ in the range 0 to 1 where $H_p$ and $H_1$ are partition length and height of the open-ing respecticely. In the case of $H_p/H_1$ of 0 flow passages of upward flow of the helium and down-ward flow of the air within the opening are unseparated (bidirectional) and the two flows interact exchange flow rate is minimum through range of the partition ratios, Two flow zones i.e. separat-ed(unidirectional)flow zone and unseparated(bidirectional) flow zone exist with increasing the partition. length, The exchange flow rate increases with increasing the separated flow zone. It is found that a maximum exchange flow rate exists at $H_p/H_1$ of 1. As a result fo comparison of the exchange flow rates by changing the partition ration the fluids interaction in the unseparated zone is found to be an important factor on the helium-air exchange flow rate.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.166-171
• /
• 2021

An active mount is devised in same geometric constraints with a conventional rubber mount. The proposed mount features the piezoelectric actuator which can be used to reduce the vibration at marine vessels or automotive vehicles. As a first step, a passive rubber mount is adopted and its dynamic characteristics are experimentally evaluated. Based on the geometry of the rubber mount, a rubber element for the active mount is manufactured and integrated with two piezostacks in series, in which the piezostack is operated as an inertial type of actuator. A conventional PID controller featured by the simple and easy implementation, is then designed to attenuate the non-resonant high frequency vibration transmitted from the base excitation. Finally, the control performances of a proposed active mount are evaluated in the wide frequency range and compared with those of the conventional rubber mount.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.281-288
• /
• 2018

The transmission of solar light according to the distribution of chromophoric dissolved organic matter (CDOM) was measured in the Pacific Arctic Ocean. The Research Vessel Araon visited the ice-covered East Siberian and Chukchi Seas in August 2016. In the Arctic, solar [ultraviolet-A (UV-A), ultraviolet-B (UV-B), and photosynthetically active radiation (PAR)] radiation reaching the surface of the ocean is primarily protected by the distribution of sea ice. The transmission of solar light in the ocean is controlled by sea ice and dissolved organic matter, such as CDOM. The concentration of CDOM is the major factor controlling the penetration depth of UV radiation into the ocean. The relative CDOM concentration of surface sea water was higher in the East Siberian Sea than in the Chukchi Sea. Due to the distribution of CDOM, the penetration depth of solar light in the East Siberian Sea (UV-B, $9{\pm}2m$; UV-A, $13{\pm}2m$; PAR, $36{\pm}4m$) was lower than in the Chukchi Sea (UV-B, $15{\pm}3m$; UV-A, $22{\pm}3m$; PAR, $49{\pm}3m$). Accelerated global warming and the rapid decrease of sea ice in the Arctic have resulted in marine organisms being exposed to increased harmful UV radiation. With changes in sea ice covered areas and concentrations of dissolved organic matter in the Arctic Ocean, marine ecosystems that consist of a variety of species from primary producers to high-trophic-level organisms will be directly or indirectly affected by solar UV radiation.