• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.349-357
• /
• 2017

The environmental problems affecting marine resources and slow growth in the fisheries industry is causing many countries to look for alternative inputs that can boost the fisheries sector. This study focuses on the effects of technological innovation in the fisheries industry on the gross domestic product (GDP) per capita across Organization for Economic Cooperation and Development (OECD) countries. Using a panel dataset, this study attempts to estimate the different effects of technological innovations in the fisheries industry from country to country using the differences-in-differences (DiD) method. After the DiD method, the Granger causality test is applied to determine the interactive relations between economic growth and the selected variables associated with technological innovation in the fisheries industry, such as government spending on fisheries R&D, the number of patents in fisheries, and employment. The results obtained from the DiD estimation show that government spending on fisheries R&D, fisheries technology development, and fisheries employment positively influences the GDP per capita across OECD counties. From the causality test, we found different bi-directional causal relationships between the GDP per capita and (spending) on fisheries technology development across countries.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.435-444
• /
• 2009

In the case of oil spill accident at sea, information concerning the movement of spilled oil is important in making response strategies. Aircrafts and the satellites have been utilized for monitoring of spilled oil. In these days, numerical models are using to predict the movement of the spilled oil. In the future a coupling method of modeling and remote sensing data should be needed to predict more correctly the spilled oil. The purpose of this paper is to present an application of satellite image data to an oil spill prediction model as an initial condition. Environmental Fluid Dynamics Computer Code (EFDC) was used to predict the movement of the oil spilled from Hebei Spirit incident occurred in Taean coastal area on December 7,2007. In order to make the model initial condition and to compare the model results, two satellite images, KOMPSAT-2 MSC and ENVISAT ASAR obtained on December 8 and 11, were used during the period of the oil spill incident. The model results showed an improvement for the prediction of the spilled oil by using the initial condition deduced from satellite image data than the initial condition specified at the oil spill incident site in the respects of the distributed spilled area.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.185-189
• /
• 2008

This study was conducted to find out the effects of relationship between ocean conditions and snowfall when cold and dry continental air mass passes through the West Sea of Korea. Route of continental high atmospheric pressure can cause effect on snowfall at the west regions (Inchoen, Gunsan, Mokpo) of the Korean Peninsula. The continental high atmospheric pressure extend from the southern China to western coastal region of the Korean Peninsula during the December, and it extend from the north side of China through Bohai Sea and Yodong Peninsula to central area of the Korean Peninsula during the February. Therefore, more snowfall recorded in Incheon is higher during Feb. than Dec.. whereas Gunsan and Mokpo is the opposite. The heavy snowfall at the western coastal region of Korea was caused by loss of the heat from the ocean to air when it's higher than $100W/m^2$. the heavy snowfall was also observed when the arrangement of continental high atmospheric pressure and low pressure was high at the West and low at the East, which formed a front in West and when the wind blow from the North or North West at the speed of $4\sim8m/sec$. There were not much relation between salinity in the western sea and snowfall in the western coastal region of Korea.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.61-67
• /
• 2008

This study analyzes the characteristics of material transportation between Busan new-port and Nakdong river estuary. Measurements of water temperate, salinity, turbidity, and tide is also analyzed to determine the characteristics of sea water and described the tidal current between two regions. For the purpose of indicating characteristics of tidal current numerical modeling is used. From the observed results, the total volume transport of sea water calculations revealed $184.71m^3/sec$ and residual volume transport was $(+)59.74m^3/sec$ during the 1st field measurement, and the total volume transport was $331.15m^3/sec$ and residual volume transport was $(-)28.88m^3/sec$ during the 2nd. The numerical simulation for three different topography cases are calculated. The results are summarized as follows: 1) The volume of material transportation about $0.7\sim18.4%$ is decreased as the depth of Busan new-port decrease (10 m). 2) The volume of material transportation about $3.5\sim21.9%$ is increased, as channel(water depth is 5 m) constructed to the Nakdong river estuary direction.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• The Korean Journal of Archival Studies
• /
• no.44
• /
• pp.199-215
• /
• 2015

This study suggest the social role of record information management for Sewol ferry disaster on sea near Jindo-gun at April 16, 2014. Social each part and the discrete member be going to carry out the social role for the disaster so that record information management part may be gather, operate, provide related record informations. Record informations is ways to reflect, to supplement about something and means to effect it. They naturally generated though automatic managed, it need to purposeful activity. From finding to lack, to remedy a problem, Korean society and record information management part shall be reinforcing directions and competency of the solution with various angles. Practical union and assistance of record information management part for Sewol ferry disaster, at first it be a help to recognize officially evidence for the accident. Secondary it producing and using better than current state of the area's record information part. Finally it may be actively comprise and implement our competency and emotion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.134-145
• /
• 2021

It is common to optimize the propulsion control system through a so-called tuning process that modifies the parameter values of the propulsion control software during a ship commissioning. However, during this process, if the error of the initial setting value is large, the tuning time may take too long, or the propulsion equipment can be seriously damaged. Therefore, we conducted research on the design of a propulsion controller that applied a Processor lever controller even for inexperienced people with relatively little experience in tuning propulsion control software to be able to reduce the tuning time while protecting the propulsion system. Through simulation, by comparing the execution result of propulsion control lever commands through the PI controller without applying the Processor lever controller. We analyzed the improvement of the Overshoot and propulsion performance. The simulation results showed that the safety of the propulsion system increased because Overshoot of approximately 9.74%, which occurred when the Processor lever function was not applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1331-1340
• /
• 2020

Object detection in maritime means that the captain detects floating objects that has a risk of colliding with the ship using the computer automatically and as accurately as human eyes. In conventional ships, the presence and distance of objects are determined through radar waves. However, it cannot identify the shape and type. In contrast, with the development of AI, cameras help accurately identify obstacles on the sea route with excellent performance in detecting or recognizing objects. The computer must calculate high-volume pixels to analyze digital images. However, the CPU is specialized for sequential processing; the processing speed is very slow, and smooth service support or security is not guaranteed. Accordingly, this study developed maritime object detection software and implemented it with FPGA to accelerate the processing of large-scale computations. Additionally, the system implementation was improved through embedded boards and FPGA interface, achieving 30 times faster performance than the existing algorithm and a three-times faster entire system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.5
• /
• pp.645-654
• /
• 2022

This study was conducted to prepare superheated steam roasted (SSR) small yellow croaker Larimichthys polyactis sweet potato salad (SPS) and tomato mousse (TM), as senior-friendly seafoods (SFS) and to examine their quality characteristics. The hardness values of SSR, SPS and TM were 110.5×1.0³, 22.4×1.0³ and 14.5×1.0³ N/m², respectively. The nutritional properties of SSR, SPS and TM were 22.4, 6.7 and 10.2 g/100 g, respectively, for protein, 97.01, 3.40 and 17.00 ㎍/100 g, respectively, for vitamin A, 10.26, 2.79 ㎍/100 g and not detected (ND), respectively, for vitamin D, 60.68 mg/100 g, ND and 4.17 mg/100 g, respectively, for vitamin C, 0.18, 0.10 and 0.33 mg/100 g, respectively, for riboflavin 24.28, 10.91 and 13.77 mg/100 g, respectively, for niacin, 76.3, 53.0 and 48.5 mg/100 g, respectively, for calcium, 258.2, 231.3 and 145.2 mg/100 g, respectively, for potassium, and ND, 0.70 mg/100 g and ND, respectively, for dietary fiber. Escherichia coli was not detected in any of the products. These results suggested that the products should be classified as step 1 for SSR, step 2 for SPS and step 3 for TM based on the SFS standard of the Korean industrial standards. Moreover, the nutritional and physical properties of the foods were improved.