• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.4
• /
• pp.106-116
• /
• 2020

To examine distribution of the Zostera species growing naturally in Ulleungdo, scuba diving surveys using ships were conducted along the coast and inside the harbors of the island at the end of September 2019. In areas of seagrass occurrence, environmental factors such as nutrient concentrations in water column and sediment pore water, salinity, and sediment organic content were also analyzed. Zostera caulescens meadows appeared in the relatively deep waters (14-24 m MSL) of Cheonbu-ri, Jeodong-ri, Sadong-ri, and Namyang-ri in Ulleungdo, and the total seagrass coverage was approximately 4.9 ha. Approximately 0.9 ha of Zostera marina meadow was found at the depths of 3-5 m MSL within Hyeonpo-hang in Hyeonpo-ri. The average shoot density and biomass of Z. caulescens were 121.9±9.7 shoot m^-2 and 99.0±13.2 gDW m^-2, respectively, with no significant differences by location. The average shoot density and biomass of Z. marina were 193.8±18.8 shoot m^-2 and 102.6±6.8 gDW m^-2, respectively. The nutrient concentrations in the sediment pore water and sediment organic content in the seagrass meadows in Ulleungdo were lower than those in eelgrass meadows on the southern and eastern coasts of Korea. These results will provide useful basic information for the marine protected species, Z. caulescens and Z. marina, and for the conservation of the waters of Ulleungdo, which has been designated as a marine protected area.

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.81-87
• /
• 2008

Distribution, population structure, and growth of the bivalve Protothaca euglypta were investigated for clams collected from the northwestern part of the East Sea of Russia. This species is distributed in further northern area than it was found earlier. In the southern area, this clam is found in the intertidal zone, up to 8 m in depth. It is one of the most numerous infaunal species of bivalves, and protected to wave action in the gravel-pebble and sand with rubble biotope. Population density of P. euglypta reaches 500 $spc./m^2$, and biomass 2 $kg/m^2$. Size and age composition of the local settlements and allometric growth of P. euglypta depend on a biotope. The growth rate of P. euglypta considerably reduces in case of the northern boundary area, whereas life span increases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.806-813
• /
• 1999

The effect of Post-Weld Heat Treatment(PWHT) of SS400 Steel was investigated with parameters such as micro vickers hardness corrosion potential polarization behaviors galvanic current Al anode generating current Al anode weight loss etc. Hardness of each parts(HAZ, BM, WM)by PWHT is lower than that of each parts by Non Post-Weld Heat Treatment(NPWHT) However hardness of WM of HAZ part was the highest among those three parts and HAZ area were also acted as cathode without any case of heat treatment. Potential difference between each three parts by PWHT was also smaller compared to NPWHT. Therefore it is suggested that Corrosion resistance property is increased by PWHT. However both Al anode generating current and anode weight loss was also decreased by PWHT compared to NPWHT when SS400 steel is cathodically protected by Al anode.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.99-120
• /
• 1997

The official talks on the amendment of the Korean - Japanese Fisheries Agreement which was concluded in 1965 are under way since 1996. The convention area of the existing fisheries agreement is the high sea, but it should be changed to the exclusive economic zone(EEZ) for the newly amended fisheries agreement. Accordingly, the fundamental policies to be embodied within the amended fisheries agreement are summarized as follows : 1. One of the basic doctrine of the new agreement should be the formulation of a device of international cooperation for the fishery development as well as the conservation and management of the fishery resources. 2. The preparation of the future-oriented international relationship which reflects the specific character of the fishery relationship between both countries. 3. The existing fishery results of both parties should be protected on the ground of the reciprocity principle. 4. Both parties should reach an agreement upon the joint conservation and management measures for the transboundary fishery resources. 5. In consideration of the difficulty of EEZ delimitation between both countries, a provisional fisheries agreement can be an alternative measure.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.53-60
• /
• 1992

In this study, cathodic protection experiment was carried out by Al-alloy sacrificial anode in marine environments which have specific resistance($\rho$) if 25~7000$\Omega$.cm and investigated protection potential, current density and loss rate of Al-alloy sacrificial anode. The main results resistance($\rho$) of 400$\Omega$.cm, the cathodic protection potential appears high about-720 mV(SCE). But below specific resistance($\rho$) of 300$\Omega$.cm, the cathodic protection potential appears low about-770 mV(SCE) and simultaneously, cathode is protected sufficiently. 2) The loss rate of Al-Alloy sacrificial anode became large with decreasing specific resistance and increasing the ratio(A sub(c)/A sub(a) of bared surface area of anode and cathode. 3) The loss rate of Al-alloy sacrificial anode(w) to the mean current density of anode(i) is as follows. w=ai+b (a, b : experimental constants)

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.1-13
• /
• 2012

We diagnosed on status and problems of environmental assessment regarding development of offshore wind power, and also on reasonable core assessment items. Most of the coastal wind power are located on the western coastline of Korea and Jeju Island. In the selections of the site for the offshore wind farms, a previous investigations should be conducted with regard to distances from the land, stabilities from external forces (tide, wave, etc.) and topographical changes, and characteristics of the surroundings (distributions of protected area, fishing ground, artificial seagrasses, and shipping traffic). It is needed to assess dispersion of suspended solids, changes of the sea bottom, and impacts on fisheries resources and fishing activities under construction of offshore wind power. Furthermore, the responses of marine organisms to noise and vibration, impacts by electromagnetic fields, impacts on sea birds, hindrances to sea lane routes, and damaged scenery and marine protection areas are thoroughly assessed during operation processes. The consultation criteria in case of development of offshore wind farm is adjusted by focusing marine environmental impact assessment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.13-30
• /
• 2018

In terms of environmental friendly land use and objective environmental assessment, legislative assessment items of Environmental Conservation Value Assessment Map (ECVAM) consists of designated areas related to conservation and protection, and areas that are planned to be designated in the future. However, the gap with the reality due to omission of several protection areas and land use regulations, and assessment grades according to 3 division land use map of forest, agricultural land, and urbanized area, results in low application and utilization of ECVAM. Therefore in this study, the legislative assessment of the ECVAM was performed with new assessment items and its new ratings, to suggest an improvement in legislative assessment items of the ECVAM. As a result, legally protected areas of inhabited islands under absolute conservation, special wildlife protection districts, protected marine areas, environmental preservation sea areas, scenic spots, forest protection zone, traditional temple preservation zone, and 45 zone or district related to regulation of land use were additionally designated as new legislative assessment items. New grade ratings were given to each additional assessment items in consideration of the restrictions on acts. As a result of the legislative assessment based on the new assessment items and new grades, the 1st grade area increased by 3.47%, and the 2nd grade area increased by 19.35%. The 3rd grade area decreased by 8.54%, the 4th grade area increased by 2.95%, and 5th grade increased by 2.91%. In addition, the out-of-grade area decreased by 20.14%, considered to be a realistic assessment based on land use. With the improved legislative assessment, it is possible to provide a more accurate environmental assessment map. Increase usage of ECVAM is expected in providing regulations of land use and base data for integrated land management of land environmental planning.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.78-88
• /
• 2000

The effect of post-weld heat treatment(PWHT) of SCM440 steel was investigated with parameters such as micro-Vickers hardness, corrosion potential, polarization behaviors, galvanic current, Al anode generating current and Al anode weight loss, etc. Each hardness of three parts(HAZ, BM, WM) by PWHT is lower than each of as-welded parts. However, hardness of WM area was the highest among those three parts in case of both PWHT and as-welded. Corrosion potential of WM part was the highest among those three parts and WM area was also acted as cathode without regard to PWHT. The magnitude of corrosion potential difference among three parts by PWHT was larger than that of three parts of as-welded, and corrosion current by galvanic cell of these three parts by PWHT was also larger compared to as-welded. Therefore, it is suggested that corrosion resistance property of SCM440 steel is decreased by PWHT than as-welded. However, both Al anode generating current and anode weight loss were also increased by PWHT compared to as-welded when SCM400 steel is cathodically protected by Al anode.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.101-111
• /
• 2018

The Korean government has been trying to conserve a marine ecosystem that has been shifting due to climate change. As part of this effort, the government designated seventy-seven marine species that have been disappearing and deserve to be protected as endangered managing them specially. To generate basic data to guide policy for these endangered species, their value must be measured. OOf the species declared endangered, coral is particularly threatened by climate change, and its management is important. Accordingly, understanding the potential value of reefs, can be an effective way of proving the benefits of continuous management to decision makers and the general public alike. To this end, we have applied the contingent valuation method (CVM), an economic technique of for valuing a environmental and non-market goods such as a coral reef. A national face-to-face survey of 1,000 randomly selected households was conducted in order to determine the public's willingness to pay (WTP) for conserving coral reefs. A one-and-one-half-bound (OOHB) model was adopted to interpret WTP responses, and a spike model was employed to deal with zero WTP responses. The results show that the conservation value of a coral reef can be estimated at 3,016 won per household per year, statistically significant at the 1 % level. Expanding values to the national population gives an annual value of 58.9 billion won. We can conclude that the public is willing to pay a significant amount to conserve coral reefs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.257-263
• /
• 2015

Recently two seismic cloaking methods of earthquake engineering have been suggested. One is the seismic wave deflection method that makes the seismic wave bend away and the other is the shadow zone method that makes an area that seismic waves cannot pass through. It is called as seismic cloaking. The fundamental principles of the seismic cloaking by variable refractive index were explained. A two-dimensional cylindrical model which was composed of 40 layers of different density and modulus was tested by numerical simulation. The center region of the model to be protected is called 'cloaked area' and the outer region of it to deflect the incoming wave is called 'cloaking area' or 'cloak area.' As the incoming surface wave is approaching to the cloaking area, the refractive index is decreasing and, therefore, the velocity and impedance are increasing. Then, the wave bends away the cloaked area instead of passing it. Three cases are tested depending on the comparison between the seismic wavelength and the diameter of the cloaked region. The advantage and disadvantage of the method were compared with conventional earthquake engineering method. Some practical requirements for realization in fields were discussed.