• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.319-327
• /
• 2022

An eight-week feeding trial was conducted to evaluate the effects of a diet consisting of different onion juice processing by-product (OJPB) levels on juvenile black rockfish Sebastes schlegelii growth, feed utilization, and, lysozyme and antioxidant enzymes activities. Juvenile rockfish (2.2 g) were randomly distributed into 15 flow-through tanks (30 fish/tank). Five experimental diets were prepared in triplicate. The experimental diets were supplemented with OJPB at different levels of 0 (control), 0.25, 0.5, 0.75 and 1% (designated as OJPB0, OJPB0.25, OJPB0.5, OJPB0.75 and OJPB1, respectively). At the end of the feeding trial, the results revealed that the fish that were fed the OJPB0.75 and OJPB1 diets showed enhancement in growth (weight gain and specific growth rate) and feed utilization (feed efficiency and protein efficiency ratio) compared with the fish that were fed other diets. Plasma lysozyme, glutathione concentration, and superoxide dismutase and catalase activities significantly increased in the fish that were fed the OJPB0.75 and OJPB1 diets. In conclusion, dietary supplementation of 0.75-1% OJPB in juvenile rockfish diet improved the growth performance and antioxidant status.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.99-111
• /
• 2008

Copper was exposed unsheltered and sheltered in four humid tropical sites, representing urban, urban-industrial, urban-marine and rural environments. The corrosion rates and the sequence of corrosion product formation are presented and discussed in relation with climatic and atmospheric pollution parameters. Chemical compositions of corrosion products were found to depend on environments and duration of exposure. In all environments, cuprite was the predominating corrosion product that formed first and continuously increased during the exposure. Among the sulphur-containing corrosion products, posnjakite and brochantite were more frequently found and the first formed earlier. Nantokite was the most common chlorine-containing products for most cases, except the high-chloride environment, where atacamite was detected instead. The corrosion rate of copper was well indicated by the colour of patina. The red-purple colour corresponded to the high corrosion rate and the greenish grey colour corresponded to the low corrosion rate. Corrosion rate of sheltered copper in urban-marine environment increased with the exposure time.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.6
• /
• pp.449-459
• /
• 2010

Recently, not only marine PLM (Product Lifecycle Management) system but also an effective outfitting BOM (Bill of Material) management has been attracted by many shipyards. In particular, efficient outfitting design is being one of major issues in shipyards since most of currently designed marine vessels have more complex outfitting system than ever. Furthermore, each outfitting system has huge number of parts that should be arranged based upon the procurement and installation plan. Outfitting BOMs evolve into different forms according to the product development phases during basic design; detail design; and production design. Therefore, it is very difficult to maintain a consistent BOM data during the design phases. In order to express the evolution of product structures and the information of outfitting along the ship design, we suggested UID (Unique ID) code system. The UID (Unique ID) is used in order to create the relationship within evolutional BOMs of each design stage. It utilizes as the procedure of weight calculation for procurement BOM during each design stage. Thereafter, in order to demonstrate suggested outfitting BOM management technique, we suggested a prototype. In the prototype system, suggested features of outfitting BOM are implemented.

• Preventive Nutrition and Food Science
• /
• v.6 no.4
• /
• pp.235-239
• /
• 2001

In order to enhance suitable processing methods of imported Pacific saury, Cololabis saira, storage stability of seasoned-dried Pacific saury (imported product) treated with liquid smoke (T2 product) was compared with a control (C, seasoning only) and T1 (treatment of 0.05% BHT instead of liquid smoke). The histamine contents of 3 seasoned-dried products were within a stable range (9.08 ~ 12.08 mg/100 g) during storage. The water activities of all products were in the 0.698 ~ 0.755 range. The viable cell count of T2 was lower than those of C and T1 during storage. The change in color values of C, T1 and T2 were not significant with increasing storage period. The results of the sensory evaluation during storage showed that the shelf-life of T2 was extended to 60 days, while those of C and T1 were limited to up to 45 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.173-178
• /
• 2002

This study was conducted to evaluate the quality of the commercial boiled-dried anchovies (Engraulis japonicus) caught from different sea (southern, eastern and western sea) by determining chemical components and sensory evaluation. Product S was from the southern sea. product W was from the western sea and product E was from the eastern. The moisture content of product S was $22.9\%$ which was low compared with those of the product I ($27.4\%$%) and the product W ($27.8\%$). There are no difference in the acid-insoluble ash total amino acid (dry basis), mineral (dry basis) contents and fatty acid composition among products caught from different sea. On the other hand, The product S was superior in the lipid properties (peroxide value and (20:5n-3+22:6n-3)/16:0) and sensory Properties (appearance and color) to those of product I and product W. Judging from the above results of chemical analyses and sensory evaluation, the product S was the best quality among commercial boiled-dried anchovy, followed by product W, and then product E.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2001.10a
• /
• pp.10-14
• /
• 2001

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.199-202
• /
• 2001

A case study classified applications which is marine systhesize, port construction, marine product and fishery, marine transportation, marine safety. And this each case investigated that GIS system, Database, system contents and the subjective management, system strong and weakness. And so analysis a current issues that marine GIS developmental policy establishment

• Natural Product Sciences
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2018

Halophytes are expected to possess abundant secondary metabolites and various biological activities because of habitat in extreme environments. In this study, we collected 14 halophytes (Asparagus oligoclonos, Calystegia soldanella, Carex pumila, Chenopodium glaucum, Elymus mollis, Glehnia littoralis, Limonium tetragonum, Messerschmidia sibirica, Rosa rugosa, Salsola komarovii, Spergularia marina, Suaeda glauca, Suaeda maritima, and Vitex rotundifolia) native to Korea and compared their total polyphenol contents, antioxidant and anti-inflammatory activities. The total polyphenol contents of R. rugosa (27.28%) and L. tetragonum (13.17%) were significantly higher than those of the other 12 halophytes and L. tetragonum, R. rugosa, and M. sibirica showed significantly greater antioxidant activities than the other 11 halophytes, as determined by DPPH (2,2-diphenyl-1-picrylhydrazyl). A. oligoclonos, E. mollis, and C. pumila showed significantly greater anti-inflammatory activities than the other 11, as determined by NO (Nitric oxide) and $PGE_2$ (Prostaglandin $E_2$) levels. In contrast, these three extracts had normal and low total polyphenol contents among the 14 halophytes. Consequently, the total polyphenol content in the 14 studied halophytes appeared to be related to antioxidant, but not anti-inflammatory activity levels.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2006

Nowadays major shipbuilding companies are trying to expand their business not only to shipbuilding but to offshore projects as well. DSME is one of them. DSME is trying to set up a flexible design and construction environment for shipbuilding and offshore construction in a single shipyard. The shipbuilding and offshore projects, however, have their unique technology but they need to be designed and constructed in one site. To support this new requirement, DSME has developed an integrated CAD system for ship and offshore projects. In this integrated design environment, the designers can design commercial ships and offshore projects in a flexible manner. Concurrent design is very important for ship and offshore design. As compared to the complexity of the product, the design period is quite short. In effect, the design system for the ship and offshore project has to support concurrent design. One essential point of concurrent design environment is a product model based design system. DSME has developed and implemented the 3D product model concurrent design environment based on Tribon M3. Tribon is a widely used CAD system in shipbuilding area that is developed by Tribon Solutions. DSME has both customized the Tribon system and developed in-house application systems to support its own design and production procedures. All the design objects are modeled in one common database to support concurrent design and accurate production. The major in-house development focused on the modeling automation and automatic drawing generation. During the drawing generation process many of the additional production information are also extracted from the 3D product model. In addition, several applications and functionalities have been developed to apply the shipbuilding based Tribon M3 system to offshore projects. The development of shape nesting, tubular connection, isometric drawing, grating nesting systems are the typical.