• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.939-949
• /
• 2023

In South Korea, a cloud-based vessel traffic service (Cloud VTS) system integrating the fourth industrial revolution technologies such as cloud and AI is currently under development in contrast to the existing VTS systems. A pilot center for at Busan VTS is being established based on differentiated technology and operational programs. The roles of operators and maintenance personnel who operate the innovative Cloud VTS system must be redefined. Additionally, a demand exists for the development of new educational programs to ensure the smooth operation of the Cloud VTS. Therefore, this study introduces the development details of a Cloud VTS system and explores educational strategies aimed at operators and maintenance personnel to ensure its safe operation.

• ALGAE
• /
• v.39 no.2
• /
• pp.109-127
• /
• 2024

High production and efficient harvesting of microalgae containing high omega-3 levels are critical concerns for industrial use. Aeration can elevate production of some microalgae by providing CO₂ and O₂. However, it may lower the production of others by generating shear stress, causing severe cell damage. The mixotrophic dinoflagellate Gymnodinium smaydae is a new, promising microalga for omega-3 fatty acid production owing to its high docosahexaenoic acid content, and determining optimal conditions and methods for high omega-3 fatty acid production and efficient harvest using G. smaydae is crucial for its commercial utilization. Therefore, to determine whether continuous aeration is required, we measured densities of G. smaydae and the dinoflagellate prey Heterocapsa rotundata in a 100-L semi-continuous cultivation system under no aeration and continuous aeration conditions daily for 9 days. Furthermore, to determine the optimal conditions for harvesting through centrifugation, different rotational speeds of the continuous centrifuge and different flow rates of the pump injecting G. smaydae + H. rotundata cells into the centrifuge were tested. Under continuous aeration, G. smaydae production gradually decreased; however, without aeration, the production remained stable. Harvesting efficiency and the dry weights of omega-3 fatty acids of G. smaydae + H. rotundata cells at a rotational speed of 16,000 rpm were significantly higher than those at 2,000-8,000 rpm. However, these parameters did not significantly differ at injection pump flow rates of 1.0-4.0 L min^-1. The results of the present study provide a basis for optimized production and harvest conditions for G. smaydae and other microalgae.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.195-206
• /
• 2017

In situ capping technology for marine sediment pollution control has never been applied in South Korea. In this study a pilot project for the capping was carried out in Busan N Harbor. Pipeline and clamshell capping technologies were implemented for the pollution control. Changes of capping shapes, sediment contamination, and the time and costs required for the two constructions were compared. Both the pipeline and clamshell technologies were found to satisfy the target thickness of 50 cm on average. However, the pipeline method did not operate sensitively in terms of change of the sea floor topography, resulting in an uneven shape and a thickness. Organic carbon and ignition loss quite decreased after the pipeline or the clamshell capping while pH showed no significant change. Organic and residual fraction of Cd, Ni, and Zn in the sediments appeared to decrease after all cappings. The pipeline method took a construction time four times as much as the clamshell method. The clamshell method was demonstrated to reduce the construction cost by about 40% compared with the pipeline method. However, a monitoring for all the parameters needs to be conducted at least two years in order to better evaluate an efficiency of the pollution control by these capping constructions.

• Journal of Power System Engineering
• /
• v.21 no.5
• /
• pp.55-62
• /
• 2017

In this study, the water content and the low calorific value of the dried sludge are analyzed by using a vertical cylinder type indirect heating type dryer for evaluatation of energy source value. The vertical cylindrical thin film dryer was an Okadora Pilot Plant, and the dryer was indirect heating vertical thin film type. The internal standard consisted of 500 mm in diameter and 700 mm in height. In the drying experiment, 10 kg of dehydrated sewage sludge was added to the dryer and the total amount of the sludge was adjusted to 27 times by variable of the time, the number of revolutions and the steam temperature. The results of analysis of the 27th experiment component of the dried product showed that the average low calorific value of about 11.2 MJ/kg and the water content of 6%. This is satisfy the fuel use standard of the thermal power plant of the sludge.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.43-48
• /
• 2004

A pilot-scale system of 20t/h for the treatment of ship's ballast water and the setup of dissolved hydroxyl radical was introduced in this paper. With this experimental system, the kill efficiencies of bacteria, mono-algae, protozoan reach 100% within 2.67s when dissolved OHㆍconcentration is 0.6mg/L. At the same time, the effect of hydroxyl radicals on the photosynthesis pigments of phytoplankton was done. The results indicate that the contents of chi-a, chl-b, chl-c and carotenoid are decreased to 35~64% within 8.0s further to the lowest limit of test after 5 minutes. When dissolved OHㆍratio concentration is 0.68mg/L, the attenuation efficiencies of photosynthesis pigment are 100%. Therefore the invasive marine species can be killed in the process of the inputting and discharge ship's ballast water.

• Journal of Drive and Control
• /
• v.10 no.4
• /
• pp.14-21
• /
• 2013

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.448-457
• /
• 2005

The experiment was performed at the large wind tunnel of the Chungnam National University to measure the velocity distribution around the stern of a Liquefied Natural Gas Carrier model. The data, mean velocity vectors of turbulent shear flows at the stern and near-wake including the propeller plane, were obtained by a five-hole Pilot tube for the double body model fixed inside the wind tunnel test section. The present result of the double body model shows a close agreement with the result of the lowing tank experiment performed by the KRISO for the same ship model. The characteristics of the LNG stern flow are discussed based on the measured velocity distribution. The data can be very useful for the validation of some numerical methods in computational fluid dynamics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.247-255
• /
• 2021

The Ulsan anchorage has not secured a sufficient area than the anchorage demand, and the criteria for objective evaluation are not clearly defined. In this study, a general formula to solve the problems of the current anchorage density and occupancy concept was derived, and new adequacy evaluation criteria were proposed. The proposed criteria were applied to the Ulsan E anchorage to evaluate the suitability of the anchorage. The anchorage density and occupancy of the E1 anchorage were 129 % and 122 %, respectively, showing that both evaluation techniques exceeded 100 %, requiring anchorage expansion according to the evaluation criteria. A plan to expand the anchorage was reviewed considering the traffic pattern and the distance from the pilot boarding point. Therefore, a plan to open 35˚ on a sector at the end of the Ulsan No. 1 fairway was developed, and its suitability was verified. Base on the verification results, there was a part of the overlap between the extended area and the traffic track on the south of the E3 anchorage, but the possibility of affecting the marine traffic was minimal. In addition, it was confirmed that anchorage adequacy was achieved.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.542-549
• /
• 2019

Maritime accidents, such as the collision of a fishing boat in Incheon's Yeongheung Island, result in several casualties and property damage, even if they occur just once. To prevent such accidents, the Incheon Metropolitan Government is implementing safety management policies; further, they will provide ship collision warning services to prevent collisions on WAVE (Wireless Access in Vehicular Environment) communication-based ship safety operation pilot projects. However, to realize these objectives, a service standardization method is required that defines specific service types, configurations, and systems, which should be prepared based on user requirement analyses. In this study, a standardization method of WAVE communication-based collision warning service was developed by analyzing the requirements of the vessel operators subject to the services and related authorities. This will help improve the quality of service, ensuring professionalism and reliability through continuous improvement and efforts for standardization, as well as data derived from demonstration projects. Therefore, it is expected to help prevent maritime accidents to a considerable extent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.2
• /
• pp.139-145
• /
• 2012

Two feeding trials were conducted to evaluate the effects of experimental extruded pellets (EEPs) and commercial EPs (CEPs) on Far Eastern catfish $Silurus$ $asotus$ in pilot- (experiment I) and commercial-scale (experiment II) tanks. Four diets were prepared: three EEPs (EEP1, EEP2 and EEP3) that contained different amounts of tuna fish meal, soybean meal, and squid liver oil, and one CEP diet. In experiment I, three replicate groups of juveniles were fed one of the four EPs in pilot-scale tanks for 19 weeks. The weight gains (WGs) of fish fed EEP1 and CEP were significantly higher than those of fish fed EEP2 or EEP3. The highest feed efficiency (FE) was observed in fish fed the CEP diet ($P$<0.05), and the FE of fish fed EEP1 and EEP3 were significantly higher than that with EEP2 ($P$<0.05). In experiment II, juveniles were fed one of four EPs in commercial-scale tanks for 19 weeks. WG and FE values of fish fed EEP1 and CEP were higher than those of fish fed EEP2 and EEP3. The results of this study indicate that the dietary formulation used in EEP1 could be used as a practical feed for Far Eastern catfish.