• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• Journal of Food Hygiene and Safety
• /
• v.25 no.1
• /
• pp.73-78
• /
• 2010

This research was conducted to assess applicability of photostimulated luminescence (PSL) and Thermoluminescence (TL) methods for investigation of infant and young children products, nut, seasoned dried fish, spice, dried fruits, fruit & vegetable, grain and marine products, which are not approved for irradiation in Korea. PSL results show that the photon counts of non-irradiated samples were lower than 700, while those of irradiated samples were higher than 700. In TL measurement, TL ratio of irradiated samples were higher than 0.1 or ones can decrease below 0.1 whereas the temperature range of TL Glow curve was between $150{\sim}250^{\circ}C$. Monitoring result about 8 class of 325 not approved to irradiated foods, photon counts of samples were less than 700, and after re-irradiation TL Ratio ($TL_1/TL_2$) through re-irradiation step at 1 kGy were higher than 0.1 for the all samples. Therefore, these results suggested that PSL and TL measurements were useful detection methods for 8 class food products not approved to irradiation in Korea and all sample (325 cases) were not irradiated when we analysed by PSL and TL methods.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.41-52
• /
• 2012

Suction drain method can directly apply vacuum pressure to the soft ground through vertical drains so it can make hardening zones around them. These hardening zones make steeply lower the discharge efficiency of the pore water with decreasing permeability. This paper considered a stepped vacuum pressure to minimize a hardening zone which is one of the important parameters that can decrease discharge efficiency. A series of laboratory tests were conducted in order to examine the effect of the hardening zones and to evaluate their effects to the ground improvements with varying durations which applied stepped vacuum pressures(-20kPa, -40kPa, -60kPa and -80kPa) with Busan marine clay. According to strength(CPT), water content test and theoretical investigation indicate a size of the hardening zone within 7cm and the decreasing ratio of permeability about 2.0~4.0. Also, the total settlements are larger for the stepped vacuum pressure than the instant vacuum loading. The application time with vacuum pressure is determined considering the geotechnical properties of the interested clays. Results of numerical analysis show that consolidation behavior is appropriate to measurement for considering hardening zones.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.17-26
• /
• 2016

The experimental investigation aims at developing controlled low strength materials (CLSM) using a self-cementitious fly ash (FA) as a binder and a bottom ash (BA) as a aggregate. The fly ash and bottom ash used in this study were obtained from a circulating fluidized bed combustion boiler (CFBC) which produces relatively high CaO containing fly ash. To find the optimum mixing condition satisfying flow consistency and unconfined compression strength (UCS), the CLSM specimens were prepared under various mixing conditions, including two types of aggregate and different weight fractions between fly ash and aggregate. Additionally, the prepared specimens were evaluated using a scanning electron microscope (SEM) and X-ray diffraction (XRD). The results of this study demonstrate that the water content satisfying flow consistency ranges from 42% to 85% and the flowability is improved with increasing the fraction of aggregate in whole mixture. The USC ranges from 0.3 MPa to 1.9 MPa. The results of UCS increases with increasing the fraction of aggregate in FA-sand mixtures, but decreases with increasing the fraction of aggregate in FA-BA mixtures. SEM images and XRD patterns reveal that the occurrence of both geopolymerization and hydration. The results of this study demonstrate that CFBC fly ash could be used as an alternative binder of CLSM mixtures.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.453-460
• /
• 2005

Since late 1970s, water quality monitoring had been performed in Korea by various agencies according to their own needs and objectives. Lacking of consistency in principles, such diverse operation has been producing difficulties in management of information on water quality parameters. These difficulties resulted from the fact that the expansion of monitoring networks had been based not on systematic methodology with considerations on scientifically established planning objectives but on personal experiences and subjective judgments in locating monitoring stations. This study aimed, therefore, to develop a selection methodology for locating monitoring stations to provide various informations on water quality to satisfy various monitoring objectives such as understanding short and long term trends of water quality, monitoring violations to water quality standards, identifying external causes and sources affecting water quality changes, supporting utilization of water resources, examining short-term variations in water quality through a concentrated investigation, estimating pollution loads from each unit watershed, supporting water quality modeling, and establishing informative systems for water resources management. Also, we applied the proposed methodology and presented an improved expansion plan for water quality monitoring networks in the Han River.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.3-16
• /
• 1999

The objective of BMP( Barge Mounted Plant) project is to construct plants on mooring floating structures at sea. To analyze the pile behavior under mooring dolphins, generally, axial or lateral behavior of soil-pile system is evaluated by using a nonlinear subgrade reaction method which models the pile as a structural element and the soil as series of nonlinear springs along the depth. As a result, load-displacement curves at pile head can be solved by finite difference method and the equivalent stiffness of bottom boundaries of dolphin structure is evaluated. In this study off-shore site investigation was performed on the marine area of Koje Island and axial and lateral load transfer curves of the ground were modeled with depth. The subgrade reaction analysis was performed for piles under axial or lateral loadings, and the required penetration depth and section of the pile were determined. Subsequently, the spring boundaries under the dolphin structure could be modeled from the calculated load-displacement curve and then the dynamic response of the dolphin structure was analyzed reasonably by considering ground conditions. The analysis considering the stiffness of the soil-pile system has resulted in larger displacement amplitudes than those for rigid foundations. Furthermore, moment distributions of the casing were dependent on the soil-pile system so that deformable foundation induces the larger moment of top section of casing and the smaller moment of pile head.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.275-281
• /
• 2016

The aim of this study was to examine the selected soil chemical properties of paddy fields in different topographic areas to efficiently manage nutrient valances of the paddy fields in Jeonbuk Province. Three-hundred soil sampling sites in paddy fields were selected from the different topographic areas in Jeonbuk Province. The soil samples were collected every four years from 1999 to 2015. Soil pH and exchangeable K and Mg concentrations declined during the experimental periods. However, almost all the chemical properties were within the proper levels for paddy soil, except exchangeable Mg concentration. Distributed areas of the paddy fields with soil pH below 5.5 continuously increased, but the paddy fields with lower concentrations of soil organic matter and available $P_2O_5$ than the proper levels declined after 2007. In addition, the paddy fields with available $SiO_2$ below the proper concentration decreased from 83.3% of the total paddy fields studied in 1999 to 61.0% of the total fields investigated in 2015. The paddy fields with lower exchangeable K and Mg than the proper levels increased after 2003 whereas the fields with lower exchangeable Ca concentration decreased. Dominant landform of coastal and plain areas was fluvio-marine plains that was distributed in 53.7% and 40.9%, respectively. Local valley and fans was a dominant landform of mountainous and middle-mountainous areas, which was 51.8% and 67.6%, respectively. Dominant soil textures distributed in coastal and plain areas were silty loam and loam. Those in mountainous and middle-mountainous areas were sandy loam and loam, respectively. Soil pH was relatively higher in coastal area and the comparatively higher content of soil organic matter was found in costal area than other areas. The concentrations of available $P_2O_5$, exchangeable Ca, and exchangeable Mg were generally higher in mountainous, coastal, plain areas, respectively, but available $SiO_2$ and exchangeable K concentrations were not significantly different among the different topographic areas.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.361-367
• /
• 1996

As a part of investigation for quality improvement of surimi gel from fish with a red muscle by addition of emulsion curd, we investigated the processing conditions of emulsion curd contained succinylated gelatin from conger eel skin as an emulsifier and emulsion curd-added surimi gel. Activity and stability of emulsion curd on standing at room temperature, chilled temperature and vibration were remarkably improved by the addition of 15 tunes of soybean oil and 5 times of water to succinylated gelatin from conger eel skin. The proximate composition of the emulsion curd was moisture 18%, protein 5%, lipid 76% and ash 0.5% and its appearance was white. Peroxide value and fatty acid composition of emulsion curd contained succinylated gelatin as an emulsifier were similar to these of soybean oil. By the addition of 6% of emulsion curd to mackerel surimi, gel strength, appearance and texture of the resulting surimi gel were improved, while its peroxide value and brown pigment revealed minor change. From the results of volatile basic nitrogen, viable cell counts and histamine content, the emulsion curd-added mackerel surimi gel can be safe In the sense of food sanitation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.124-132
• /
• 2018

This research presents the results of an investigation on the characteristic of multi-component blended high fluidity mortars. The binder was blended ordinary Portland cement(OPC), ground granulated blast furnace slag(GGBFS), calcium sulfoaluminate(CSA) and ultra rapid setting cement(URSC). The GGBFS was replaced by OPC from 30%(P7 series), 50%(P5 series) and 70%(P3 series), CSA and URSC was 10% or 20% mass. The superplasticizer of polycarboxylate type were used. A constant water-to-binder ratio(w/b)=0.35 was used for all mixtures. Test were conducted for mini slump, setting time, V-funnel, compressive strength and drying shrinkage. According to the experimental results, the contents of superplasticizer, V-funnel and compressive strength increases with an increase in CSA or URSC contents for all mixtures. Moreover, the setting time and drying shrinkage ratio decrease with and increase in CSA or URSC. CSA decreased dry shrinkage but URSC had less effect. However, the mixed binders of CSA and URSC had a large effect of reducing drying shrinkage by complementary effect. This is effective for improving the initial strength of URSC, and CSA is effective for the expansion and improvement of long-term strength.