• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.186-188
• /
• 2006

To secure abyssal resources, submarine environment should be firstly explored. On that occasion, the withdrawal of the instrument is of importance and the submarine ultrasonic wave should be stably identified regardless submarine environment and passive factor. In the existing control methods, the control informations, received from an observation instrument, are identified used by hardware and repeatedly compared with standard information. Hereupon, a marine observation instrument remote control system using the combination of FSK and ASK that was improved its controllability and movability was presented in this paper. Likewise, the logicality of control algorithm and remote control system were ascertained by experiments.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.53-54
• /
• 2005

This paper describes that send some signal from encoder attached to crankshaft of marine-engine to measuring instrument using power line modem(PLM) and display cylinder pressure, rpm and etc. on LCD. Conventional method that sends signal along the long signal line has some inconvenience from too long signal line length caused by huge volume of ship's engine. Power line modem can have short signal line from outlets to measuring instrument. Because it use exist power line for send signals, so it have low installation cost and could have good merits in job sites. Through this experiment, pressure in cylinder, engine rpm and etc. signals through PLM are well recognized at measuring instrument.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.94-97
• /
• 2005

Seaworthiness is an important part of the carrier's obligation in the carriage of goods by sea. Especially seaworthiness of the ship is one of the most important obligations of the carrier in the field of international transport law. Therefore it will be important to examine the expected impacts by adopting a continuing duty of seaworthiness in UNCITRAL Draft Instrument from the Korea point of view because Korean Commercial Act provides that carriers are only obliged to exercise due diligence to make the ship seaworthy before and at the beginning of the voyage. This paper examines the concept of the seaworthiness and analyses the provisions of the Draft Instrument for the duty of seaworthiness in comparison with the Korean Commercial Act.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.805-809
• /
• 2006

To secure resources, submarine environment should be firstly explored. On that occasion, the withdrawal of the instrument is important and the submarine ultrasonic wave should be stably identified regardless submarine environment and passive factor. In the existing control methods, the control informations, received from an observation instrument, are identified used by hardware and repeatedly compared with standard information. Hereupon, a marine observation instrument remote control system using the combination of FSK and ASK that was improved its controllability and movability was presented in this paper. Likewise, the logicality of communication algorithm were ascertained by experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1279-1285
• /
• 2004

This paper presents the characteristic simulation of PM-type magnetic circuit breaker with the 2D finite element magnetic field solution including non-linearity of the material and an eddy current. Change of dynamic characteristic of the actuator is quantified from the finite element analysis. The results obtained from a commercial finite element analysis software are compared with those calculated from the developed finite element analysis software. A new modified model to decrease the eddy current is proposed. The characteristics of the two models are compared.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.245-245
• /
• 2017

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.101-106
• /
• 2013

This paper proposes the new high precision monitoring sensor for the Marine Installation. Among variety of sensor network systems, wireless information transmission through the marine is one of the enabling technologies for the development of future marine-observation systems and sensor networks. Applications of marine monitoring range from oil industry to aquaculture, and include instrument monitoring, pollution control, climate recording, prediction of natural disturbances. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the dynamic characteristics for obtaining the location information of monitoring sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the Monitoring for the Marine Installation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.129-129
• /
• 2012

Pumps are used widely in industry, the commercial sector and ships. A poorly selected pump or a pump that does not run at optimum design duty point is a classic symbol of wasted energy and money. It, therefore, becomes important to evaluate the efficiency of these pumps. This paper analyzes traditional technique and instrument to measure some parameters needed to calculate a pump efficiency. The pump efficiency measuring instrument (PEMI) was made and tested on real pump systems. It has been giver the accurate results compared with performance curve given by pump maker.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.62-68
• /
• 1994

Recently, the trends toward reduction in size and weight of industrial products increased the application of micro hole for manufacturing gadgets of high precision and gave rise to a great deal of interest for micro hole drilling M/C. Quite a few research work is performed on micro drilling on domestic basis compared with the tendency of analyzing cutting mechanism, adaptive control, monitoring of generally available drills of diameter greater than 1mm. This study adresses the design, manufacturing and controlling a micro hole drilling M/C with the overload detection instrument and the step feed mechanism. Controlling and monitoring of the drilling process are acomplished on PC basis for more user interfaces and effectiveness. The test machine of the results of this research shows a good foundation for extending further micro hole machining technique.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.138-138
• /
• 2017