• Corrosion Science and Technology
• /
• v.3 no.1
• /
• pp.20-25
• /
• 2004

In order to clarify the durability of protective coatings for maritime steel structures, various anti-corrosive organic coated steel samples were exposed for twelve years in semitropical marine environment at Miyakojima Island, Okinawa, JAPAN. Samples were various organic coated steel pipes, 4.0 m in length and 150 mm in diameter. While the bare steel pipe entirely corroded in 4.5 mm thickness in four and half years, these organic coated steel pipes exhibited protective appearances after twelve-year-exposure except for the defect in the coatings. Polyethylene (PE) lining pipe exhibited a good protective performance. Urethane painted pipe was also good but some barnacles stuck to its surface. A combination of petrolatum tape and FRP cover showed sufficient corrosion resistance for steel surface. The correlation in results between exposure and laboratory acceleration test was examined. It was found that salt spray test (SST) results corresponded to rusted area of scratched portion and that adhesion change of coating layer corresponded to the rotating immersion test result. Among the on-site measured data, volume resistivity is utilized for the index of corrosion protection performance of organic coating.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.496-504
• /
• 2012

In the field of environmental protection, close co-operation between Contracting Parties is strongly required and the reporting obligation under MARPOL 73/78 is playing an important role as a part of international co-operation for the environmental protection. In this paper, I review the meaning of reporting obligation under MARPOL 73/78 from the perspective of the international law, and investigate the status of implementation for the reporting obligation. For this purpose, I analyze status of implementation for last 10 years from 2001 to 2010 regarding reporting obligations under MARPOL 73/78 in accordance with MEPC/Circ.318. Finally, I suggest the way forward to improve Contracting Parties' compliance with reporting obligations through this analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.93-99
• /
• 2010

Republic of Korea is the first country which received international aids, h1s become a member of DAC, and recently has strengthened the international aids policy through ODA(Official Development Assistance). Korea ODA has focused on the area of education, social infrastructure, etc., but not on maritime affairs. However, since Korea has become a maritime country and a member of "A Group" council of IMO, the international shipping community including IMO strongly requests Korea to transfer Korea's maritime safety technology to developing countries for the sake of international maritime safety and marine environment protection. In this study, the direction of road map for effective transfer of maritime safety technology and marine environment protection technology was presented. The strategy for implementation of the suggested road map was proposed as well.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.42-49
• /
• 1993

Recently, because the lubricating oil showed a tendency to be emulsified and oxidized by high speed, high output and the extension of maintenance & conservation of marine engine, the cavitation erosion-corrosion at such an environment became a big problem on effective performance of engine. Therefore, there was a need to study the behavior and protection of erosion-corrosion damage, and then applied inhibitor to a protective method of cavitation erosion- corrosion damage. At this time, test environments were marine lubricating oil & various emulsified oil that mixed distilled water and sea water etc., and also used 20KHz, 24.mu.m piezoelectric vibrator as an experimental apparatus of cavitation erosion. With this apparatus, we investigated an influence of the emulsified oil on characteristics of erosion-corrosion and protection for erosion-corrosion by inhibitor at slide bearing metals.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.232-233
• /
• 2005

Stainless steel has been stably used closed by passivity oxidation films($Cr_2O_3$) is made by neutral atmospheric environment. However, passivity oxidation films of the surface of stainless steel occasionally comes to be destroyed in seawater which is influenced by an environment having halogen ion like $Cl^-$, then, localization corrosion comes to occur. Stainless steel 304 for shaft system material of the small-size FRP fishing boat on seawater environments made an experiment on simulation of sacrifical anode(Al, Zn). Through these experiment and study, following results have been obtained ; According to the field inspection and corrosion simulation, the corrosion on the 2nd class stainless steel shaft(STS 304) in FRP fishing boat has been verified to occur by crevice corrosion and galvanic corrosion etc.. According to the comparison and analysis of Stainless steel 304 shaft materials after simulation leaving unprotected and applying cathodic protection, unprotected shaft specimen of stainless steel 304 was severely corroded, but, protected shaft specimen was not totally corroded. This result is assumed to be made by the facts that anodic reaction, $Fe{\rightarrow}Fe^{2+}$ + $2e^-$, has been restricted by the cathodic protection current of sacrificial anode material.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.51-56
• /
• 2007

It has generally used the burial method for the protection methods of submarine cable. Especially in Korea, It has used the protection methods of various types according to fisheries and fishing implements. Present day, All the protection methods-burial, continuous concrete mattress, cast iron pipes, U-duct, concrete bags, Rock Berm, mortar bags, FCM apply to the submarine cable, but these methods just focus on the safety of submarine cable against the external damages not the characteristics of ocean environment and the protection of environment. This research is going to present the protection methods of submarine cable according as the characteristics of ocean environment-external damages, depth of water, seabed condition, wave power and the protection of environment.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.91-91
• /
• 2017

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.3
• /
• pp.270-280
• /
• 2023

The creation of marine protected areas is an important aspect of marine ecosystem sustainability. However, South Korea has not achieved its Aichi Biodiversity Target to designate 10% of its sea as marine protected by 2020. Local residents have strong opposition to the designation of protected areas in South Korea; there has been little trust in the government since the 1970s, when residents felt that their property rights were being ignored in favor of creating national parks. Here, we present a case where creation of a marine protected area was led by residents of TongYeong City. The success of a participation income project to remove marine debris in the city seems to be an important factor that led to the designation of the marine protected area. The case of TongYeong City is compared with that of nearby Geoje City, where an ecologically important stream has not been designated as a wetland protection area, although a similar participation income project enrolled the city's residents. The comparison provides a tentative assessment of the conditions needed to increase trust among residents. The results suggest that, if the projects are well-designed and well-managed, participation income projects to remove marine debris can be effective in building trust among stakeholders in potential marine protected areas.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.77-81
• /
• 2012

Cathodic protection(CP) is widely used as a means of protecting corrosion for not only marine structures like ship hulls and offshore drilling facilities, but also underground structures like buried pipelines and oil storage tanks. The principle of CP is that the anodic dissolution of metal can be protected by supplying electrons to the cathode metal. When unprotected structures are nearby to CP systems, interference problems between unprotected and protected structures may be happened. The stray current interference can accelerate the corrosion of nearby structures. So far many efforts have been made to reduce the interference in the electric railway systems adjacent to the underground metal structures like buried pipelines and gas/oil tanks. During recent few decades the protection technologies against stray current induced corrosion have been significantly improved and a number of techniques have been developed. However, there is very limited information an marine environments. Some complex harbor structures are protected by two cathodic protection systems, i.e. sacrificial anode cathodic protection(SACP) and impressed current cathodic protection(ICCP). In this case, when the protection current from sacrificial anodes returns to the cathode through electrolyte, it passes through nearby other low resistance metal structures. In many cases the stray current of ICCP systems influences the function of SACP. In this study, the risk of stray current from the SACP system to adjacent reinforced concrete structures has been verified through laboratory experiments. Concrete and steel pile structures modeled a part of bridge have been investigated in terms of CP potential and current between the two. The variation of stray current according to the magnitude of ICCP/SACP has been studied to mitigate it and to suggest the proper protection criteria.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.1-6
• /
• 2016

Background: It is very difficult to set a regulatory guidance or criteria for the protection of non-human species from the ionizing radiation, because there are no generally or internationally accepted methods for demonstrating the compliance with such criteria. It is needed that Korea develop the primary dose rate standards for the protection of both aquatic and terrestrial biota in the near future. Materials and Methods: The potential dose rates due to both external and internal radiation exposures to marine organisms such as plaice/flounder, gray mullet, and brown seaweed collected within territorial seas around the Korean Peninsula were estimated. Results and Discussion: The total dose rates to plaice/flounder, gray mullet and brown seaweed due to $^{40}K$, a primordial radionuclide in marine environment, were found to be 0.2%, 0.08% and 0.3% of approximately the values of the Derived Consideration Reference Levels (DCRLs, i.e. $1-10mGy{\cdot}d^{-1}$), respectively, as suggested by the International Commission on Radiological Protection (ICRP) publication 124. The total dose rates to marine fishes and brown seaweed due to anthropogenic radionuclides such as $^{90}Sr$, $^{137}Cs$ and $^{239+240}Pu$ were considered to be negligible compared to the total dose rate due to $^{40}K$. The external exposure to benthic fish due to all radionuclides was much higher than that of pelagic fish. Conclusion: From this study, it is recommended that the further study is required to develop a national regulatory guidance for the evaluation of doses to non-human species.