• Environmental Analysis Health and Toxicology
• /
• v.15 no.1_2
• /
• pp.31-37
• /
• 2000

Acetanilide may be released into the environment through air and wastewater from its production and use sites and exposed to human. Acetanilide is known to produce an analgesic effect and may pose adverse effects on human health by overly exposure. According to the EUSES system, acetanilide showed a high MOS (Margin of safety) value exceeding 6$\times$10$^4$ on a regional exposure, which is safe enough for public health. Whereas the lowest MOS value in dermal exposure was estimated as 3$\times$10$^{-4}$ on a local basis (workplace), the risk could be partly counteracted by taking preventive measures such as using mask and globes and good ventilation in the work places. Acetanilide may pose a potential risk for workers by dust inhalation. For the sake of health protection in the work places, additional data should be accumulated with respect to repeated dose toxicity, reproduction toxicity and developmental toxicity, etc. It is, therefore, recommended that acetanilide should be a candidate for further work to supplement the lacking data until it is proved to be safe in the occupational health aspects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.244-250
• /
• 2017

Dimethylamine (DMA), nitrate, nitrite, and biogenic amines (BA) are precursors of carcinogenic N-nitrosamines. This study investigated contamination levels of DMA, nitrate, nitrite, and BA in various types of Korean commercial kimchi such as Baechu kimchi, Kkakduki, Chonggak kimchi, Matkimchi, ripened Baechu kimchi, and Baek kimchi. The average DMA, nitrate, and nitrite levels in Baechu kimchi were 29.7, 2,178.8, and 3.0 mg/kg, respectively. Low levels of DMA and nitrate were detected in Kkakduki. Tryptamine, putrescine, cadaverine, tyramine, and spermidine were detected in kimchi with exclusion of Baek kimchi and Chonggak kimchi. Tryptamine in Baek kimchi was only present in trace amount, and spermidine was not detected in Chonggak kimchi. The average tryptamine, putrescine, cadaverine, tyramine, and spermidine levels in Baechu kimchi were 15.0, 64.6, 18.0, 44.0, and 7.8 mg/kg, respectively. A low level of tyramine was detected in Kkakduki. In addition, contamination of N-nitrosodimethylamine (NDMA) was detected in Kkakduki at a level of $1.38{\mu}g/kg$. Daily exposure to NDMA in the consumer only group was estimated using average daily Kkakduki consumption and average body weight of the total population. The estimated daily intake of NDMA by Kkakduki was $2.31{\times}10^{-7}mg/kg\;b.w./d.$ The margin of exposure to NDMA for the general population was 259,924. Accordingly, the health risk from NDMA caused by intake of Kkakduki was considered to be very low.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.271-279
• /
• 2016

To evaluate exposure characteristics of the insecticide imidacloprid to apple orchard workers during treatment on orchard fields and evaluate its potential risk using a whole body dosimetry (WBD) method, 1,000-time diluted acephate+imidacloprid 25(20+5)% solutions were sprayed on 10 apple orchard fields in Cheongju with a speed sprayer at a rate of 3,000 L/ha/person, after put on clothes such as inner/outer clothes, personal air pump with a IOM sampler, nitrile glove and mask. Exposure test included mixing, loading and application steps. The test pesticide imidacloprid residues in the collected samples were analyzed with a HPLC-DAD. Recoveries ranged from 81.5 to 108.6% for analytical method validation and from 73.8 to 86.7% for field recovery. Total exposed amounts to mixer/loader and applicator were found to be 0.0014-0.0279% of total applied active ingredient of imidacloprid. Glove exposure of both mixer/loader and applicator was higher than the other parts. Margins of safety of mixer/loader and applicator were calculated to be 97-355 and 46-196, respectively, indicating that exposure risk of imidacloprid to apple orchard workers by spraying with a speed sprayer was very low.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.193-197
• /
• 2009

Background: Though it is clear that many types of viruses can infect the oral mucosa, its condition for infection is unclear. The purpose of this study was to analyze the conditions for viral infection of normal oral mucosa and explore the possibility of topical gene therapy to oral mucosa using a viral vector. Methods: Freshly taken fragments of the palate and the tongue of mice were used for organ culture. The specimens were exposed to green fluorescent protein (GFP)-adenoviral vector for 1 hour except for the control. Initial viral titer was $6.3{\times}10^{11}\;pfu/ml$ and the virus was diluted to working concentrations. The dilution ratio was 1:1,000 ($6.3{\times}10^8\;pfu/ml$), 1:10,000 ($6.3{\times}10^7\;pfu/ml$), and 1:100,000 ($6.3{\times}10^6\;pfu/ml$). They were then cultured on a stainless steel wire mesh in an organ culture dish. The specimens were stereoscopically examined every 24 hours for 6 days, after which they were fixed and analyzed through immunohistochemical methods Results: There was no visible expression in the control, $6.3{\times}10^6\;pfu/ml$, and $6.3{\times}10^7\;pfu/ml$ groups. Initial expression was observed at 24 hours after infection in both the palate and the tongue in $6.3{\times}10^8\;pfu/ml$ and the expression significantly increased until 3 days in the palate and 2 days in the tongue after infection (P<0.05). In both groups, the expression was mostly observed at the resection margin. Immunohistochemical studies showed that the epithelial cells were positive to GFP. Conclusion: The present study showed that topically applied adenovirus containing specific genetic information of GFP could successfully transduce GFP in normal oral epithelial cells at the resection margin in organ culture in terms of dose and exposure time.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.158-174
• /
• 2002

The aim of this study was to investigate the effect of light irradiation modes on polymerization shrinkage, degree of cure and microleakage of a composite resin. VIP$^{TM}$ (Bisco Dental Products, Schaumburg, IL, USA) and Optilux 501$^{TM}$ (Demetron/Kerr, Danbury, CT, USA) were used for curing Filtek$^{TM}$ Z-250 (3M Dental Products, St. Paul., MN, USA) composite resin using following irradiation modes: VIP$^{TM}$ (Bisco) 200mW/$\textrm{cm}^2$ (V2), 400mW/$\textrm{cm}^2$ (V4), 600mW/$\textrm{cm}^2$ (V6), Pulse-delay (200 mW/$\textrm{cm}^2$ 3 seconds, 5 minutes wait, 600mW/$\textrm{cm}^2$ 30seconds, VPD) and Optilux 501$^{TM}$ (Demetron/Kerr) C-mode (OC), R-mode (OR). Linear polymerization shrinkage of the composite specimens were measured using Linometer (R&B, Daejeon, Korea) for 90 seconds for V2, V4, V6, OC, OR groups and for up to 363 seconds for VPD group (n=10, each). Degree of conversion was measured using FTIR spectrometer (IFS 120 HR, Bruker Karlsruhe, Germany) at the bottom surface of 2 mm thick composite specimens V2, Y4, V6, OC groups were measured separately at five irradiation times (5, 10, 20, 40, 60 seconds) and OR, VPD groups were measured in the above mentioned irradiation modes (n=5 each). Microhardness was measured using Digital microhardness tester (FM7, Future-Tech Co., Tokyo, Japan) at the top and bottom surfaces of 2mm thick composite specimens after exposure to the same irradiation modes as the test of degree of conversion(n=3, each). For the microleakage test, class V cavities were prepared on the distal surface of the ninety extracted human third molars. The cavities were restored with one of the following irradiation modes : V2/60 seconds, V4/40 seconds, V6/30 seconds, VPD , OC and OR. Microleakage was assessed by dye penetration along enamel and dentin margins of cavities. Mean polymerization shrinkage, mean degree of conversion and mean microhardness values for all groups at each time were analyzed using one-way ANOVA and Duncan's multiple range test, and using chi-square test far microleakage values. The results were as follows : . Polymerization shrinkage was increased with higher light intensity in groups using VIP$^{TM}$ (Bisco) : the highest with 600mW/$\textrm{cm}^2$, followed by Pulse-delay, 400mW/$\textrm{cm}^2$ and 200mW/$\textrm{cm}^2$ groups, The degree of polymerization shrinkage was higher with Continuous mode than with Ramp mode in groups using Optilux 501$^{TM}$ (Demetron/Kerr). . Degree of conversion and microhardness values were higher with higher light intensity. The final degree of conversion was in the range of 44.7 to 54.98% and the final microhardness value in the range of 34.10 to 56.30. . Microleakage was greater in dentin margin than in enamel margin. Higher light intensity showed more microleakage in dentin margin in groups using VIP$^{TM}$ (Bisco). The microleakage was the lowest with Continuous mode in enamel margin and with Ramp mode in dentin margin when Optilux 501$^{TM}$ (Demetron/Kerr) was used.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.565-569
• /
• 2001

A new surgical approach to the area of the infratemporal fossa and parapharyngeal space is described. This approach results in a wide-field exposure of the infratemporal fossa, pterygomaxillary space and parapharyngeal space. We used two osteotomies on the patient's mandible and temporary resection of zygomatic arch for superior margin of tumor. Lower lip splitting was not needed because the incision was started in the frontal scalp, curved in front of and below the external auditary canal, and extended anteriorly to the greater horn of hyoid bone on the neck along a skin crease. We had good results without sacrifice of the facial nerve, mandibular function and sensory supply of the face and oral cavity.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.222-228
• /
• 2018

Background The most common surgical treatment for paralytic lagophthalmos is the placement of a weight implant in the upper eyelid; however, this technique confers the risks of implant visibility, implant extrusion, and entropion. In this study, we present a new technique of placing platinum weight implants between the levator aponeurosis and inner septum to decrease such complications. Methods A total of 37 patients with paralytic lagophthalmos were treated between March 2014 and January 2017 with platinum weight placement (mean follow-up, 520.1 days). After dissecting through the orbicularis oculi muscle, the tarsal plate and levator aponeurosis were exposed. The platinum weights (1.0-1.4 g) were fixed to the upper margin of the tarsal plate and placed underneath the orbital septum. Results Five patients could partially close their eye after surgery. The average distance between the upper eyelid and the lower eyelid when the eyes were closed was 1.12 mm. The rest of the patients were able to close their eye completely. Three patients patient developed allergic conjunctivitis after platinum weight insertion, which was managed with medication. None of the patients complained of discomfort in the upper eyelid after surgery. Visibility or extrusion of the implant were observed in three patients. Conclusions Postseptal weight placement is a safe and reproducible method in both primary and secondary upper eyelid surgery for patients with paralytic lagophthalmos. It is a feasible method for preventing implant visibility, implant exposure, and entropion. Moreover, platinum is a better implant material than gold because of its smaller size and greater thinness.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.5
• /
• pp.581-589
• /
• 1997

This study was undertaken to examine the effects of ultraviolet light (UVL) and rebamipide on the cutaneous blood flow and tissue survival on rabbit skin flap. In a random bipedicle flap, Laser Doppler Flowmetry (LDF) was employed to measure the blood flow of flap (BFF). Wound Margin Strength (WMS) measured by force transducer and Light microscophy were used for evaluation of tissue viability. Single exposure to UVL increased the BFF gradually for more than 15 hours, and decreased the vasoconstrictor effect of intravenous phenylephrine. The UVL-induced increase in BFF regressed after 18 hours of irradiation, and this regression was tended to be enhanced by intradermal injection of L-NAME, a nitric oxide synthase (NOS) inhibitor, but the regression was significantly reversed by acetylcholine, an endothelial constitutive NOS (cNOS) activator and L-arginine, an NO precusor. Rebamipide, a novel antiulcer agent known to scavenge the hydroxyl radical, abruptly reversed the spontaneous regression of the UVL- induced increase in BFF by the same manner as L-arginine. In ischemic skin flap, rebamipide increased the BFF abruptly by the same manner as sodium nitroprusside (SNP), an NO doner, while N-acetylcystein (NAC), a free radical scavenger, gradually increase the BFF. The rebamipide-induced increase in BFF was sustained at the level of the SNP-induced increase in BFF during the late period of experiment. Rebamipide increased the WMS of skin flaps and prevented the tissue necrosis in comparison with L-NAME. Based on these results, it is concluded that in rabbit skin, UVL irradiation increases the BFF by NO release, and rebamipide exerts a protective effect on the viability of ischemic skin flaps by either or both the increase in BFF by NO release and free radical scavenger effect.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.847-849
• /
• 2010

Purpose: Traditional radical surgery for vulvar cancer produces severe skin and soft tissue defects in the vulvar and vaginal area. Vulvoperineal V-Y advancement fasciocutaneous flaps have limitations in advancement and tension at the wound margin and vaginal orifice area, causing wound disruption or vaginal wall exposure. Therefore, we designed the "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap for 3-dimensional reconstruction of vagina and vulvar area. Methods: A 27 year-old female was diagnosed with vulvar intraepithelial neoplasia. Radical vulvectomy and full-thickness-skin-graft was performed. We designed a vulvoperineal V-Y advancement fasciocutaneous flap as the greater wing and inguinal rotational skin as the lesser wing. After flap elevation, the inguinal flap was rotated $180^{\circ}$ to reconstruct the labia major and vaginal orifice. The perineum was reconstructed using V-Y advancement flaps. Results: The flap survived completely, without any complications. After 6 months, the patient was able to perform normal sexual activities and after 18 months, the patient was able to give birth to normal child by caesarean section. Conclusion: The traditional vulvoperineal V-Y advancement fasciocutaneous flap is thin, reliable, easily elevated and matches local skin quality. However, the vaginal wall becomes exposed due to limited advancement and tension of the flap. The "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap is useful for the release of vaginal orifice contracture, reconstruction of the labia major, and 3-dimensional reconstruction of vagina and vulvar area.

• Korean journal of food and cookery science
• /
• v.31 no.2
• /
• pp.112-117
• /
• 2015

The analytical method for ethyl carbamate (EC) in maesil (Prunus mume) extract was developed with deuterium-labeled ethyl carbamate as an internal standard. Samples were neutralized with an addition of 1 N sodium hydroxide solution, followed by a solid phase extraction with a Chem Elut cartridge. A standard curve exhibited a good linearity with correlation coefficient of 0.9991. The limit of detection (LOD) and limit of quantification (LOQ) were 2.91 ng/g and 8.83 ng/g, respectively. The recovery rate of EC ranged from 91.40% to 120.90%. The precision never exceeded 12.57% (intra-day) and 11.03% (inter-day). Samples were comprised of 24 home-made and 7 commercially-available maesil extracts. Eight home-made samples contained EC at levels between 3.39 and 75.76 ng/g. Three commercially-available samples had EC at levels between 11.67 and 20.16 ng/g. Average daily intakes of EC from maesil extracts for consumers were 0.23 g/kg of body weight. Based on a benchmark dose confidence limit ($BMDL_{10}$) of 0.25 mg/kg of body weight/day, the margin of exposure (MOE) of EC in maesil extract for consumers was 94,150, which is not of concern. Considering that a daily intake of maesil extract has been increasing, further studies on the formation of EC in maesil extract is needed.