• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.348-354
• /
• 2018

최근 BEMS(Building Energy Management System)는 공간정보를 적극 활용하고 있다. 공간정보가 포함된 BIM(Building Information Modeling)을 잘 활용한다면, 사용자는 공간정보와 연계된 직관적 건물 에너지 관리가 가능하다. 이 연구는 BIM-BEMS 연계를 위한 MF(Model Filter)을 활용한 데이터 맵핑 방법인 M-BDL(MF-based BIM Data Linkage)제안한다. 최근 BEMS은 3차원 공간정보를 적극 활용하고 있다. 이를 통해 사용자는 공간정보가 연계된 직관적인 건물 에너지관리가 가능하다. BIM 데이터를 에너지 관리 시스템에 활용하기 위해서는, 사용자 요구사항 관점에서 필요한 BIM 데이터만 BEMS과 연계할 필요가 있다. 하지만, Rich dataset인 BIM을 그대로 연계한다면 사용자가 불필요한 정보까지 관리해야 하는 부담을 주게 된다. M-BDL을 통해, 무거운 BIM 데이터에서 BEMS에 필요한 데이터만 맵핑함으로써, BIM데이터를 경량화할 수 있었고, 유지보수에 필요한 데이터량을 줄일 수 있다. 이 기술은 필요한 BIM 데이터만 필터링된 BIM 데이터와 BEMS 데이터베이스 간 연계할 수 있는 M-BDL 맵핑 방법을 제안한다.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.458-466
• /
• 1998

In this work, a frequency domain method is tested numerically and experimentally to improve nonlinear model parameters using the frequency response function at the nonlinear element connected point of structure. This method extends the force-state mapping technique, which fits the nonlinear element forces with time domain response data, into frequency domain manipulations. The force-state mapping method in the time domain has limitations when applying to complex real structures because it needd a time domain lumped parameter model. On the other hand, the frequency domain method is relatively easily applicable to a complex real structure having nonlinear elements since it uses the frequency response function of each substurcture. Since this mehtod is performed in frequency domain, the number of equations required to identify the unknown parameters can be easily increased as many as it needed, just by not only varying excitation amplitude bot also selecting excitation frequency domain method has some advantages over the classical force-state mapping technique in the number of data points needed in curve fit and the sensitivity to response noise.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권4호
• /
• pp.457-462
• /
• 2011

The purpose of this study was to detect QTL for carcass quality on bovine chromosome (BTA) 6 using a high density SNP map in a Hanwoo population. The data set comprised 45 sires and their 427 Hanwoo steers that were born between spring of 2005 and fall of 2007. The steers that were used for progeny testing in the Hanwoo Improvement Center in Seosan, Korea, were genotyped with the 2,535SNPs on BTA6 that were embedded in the Illumina bovine SNP 50K chip. Four different linkage disequilibrium (LD) mapping models were applied to detect significant SNPs for carcass quality traits; the fixed model with a single marker, the random model with a single marker, the random model with haplotype effects using two adjacent markers, and the random model at hidden state. A total of twelve QTL were detected, for which four, one, three and four SNPs were detected on BTA6 under the respective models (p<0.001). Among the detected QTL, four, two, five and one QTL were associated with carcass weight, backfat thickness, longissimus dorsi muscle area, and marbling score, respectively (p<0.001). Our results suggest that the use of multiple LD mapping approaches may be beneficial in increasing power to detect QTL given a limited sample size and magnitude of QTL effect.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.93-105
• /
• 2023

This paper examines a high-speed railway CRTS-II ballastless track-bridge system. Using the stationary potential energy theory, the mapping analytical solution between the bridge deformation and the rail vertical geometric irregularity was derived. A theoretical model (TM) considering the nonlinear stiffness of interlayer components was also proposed. By comparing with finite element model results and the measured field data, the accuracy of the TM was verified. Based on the TM, the effect of bridge deformation amplitude, girder end cantilever length, and interlayer nonlinear stiffness (fastener, cement asphalt mortar layer (CA mortar layer), extruded sheet, etc.) on the rail vertical geometric irregularity were analyzed. Results show that the rail vertical deformation extremum increases with increasing bridge deformation amplitude. The girder end cantilever length has a certain influence on the rail vertical geometric irregularity. The fastener and CA mortar layer have basically the same influence on the rail deformation amplitude. The extruded sheet and shear groove influence the rail geometric irregularity significantly, and the influence is basically the same. The influence of the shear rebar and lateral block on the rail vertical geometric irregularity could be negligible.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권1호
• /
• pp.19-30
• /
• 2014

시맨틱 웹의 확산을 위해 관계형 데이터베이스에 저장된 데이터를 온톨로지로 변환하는 연구가 활발히 진행 중이다. 관계형 데이터베이스에 저장된 데이터를 온톨로지로 변환하기 위한 연구들은 관계형 데이터베이스의 구성 요소와 RDF 구성 요소를 매핑하는 방식인 RDB to RDF 매핑 모델을 주로 사용한다. 하지만 지금까지 제안된 매핑 모델들은 그 표현방식이 서로 다르며, 이는 사용자의 접근성과 재사용성을 떨어트린다. 이로 인해 표준화된 매핑 언어의 필요성이 대두되었으며, W3C에서는 RDB to RDF 모델의 표준 매핑 언어로서 R2RML을 제안하였다. R2RML은 관계형 데이터베이스 스키마 정보만을 RDF로 변환하는 특징을 가진다. 이와 같은 이유로 관계형 데이터베이스의 테이블 명, 컬럼 명 사이의 관계정보에 대한 온톨로지를 추가할 수 없다. 이 논문에서는 이러한 문제를 해결하기 위해 관계형 데이터베이스 구성 요소의 의미 관계를 고려한 RDB to RDF 매핑 시스템을 제안한다. 제안 시스템은 R2RML에서 정의한 관계형 데이터베이스의 스키마 정보에 RDFS 속성 정보를 확장하여 매핑 정보를 생성한다. 이러한 매핑 정보는 관계형 데이터베이스에 저장된 데이터를 RDFS 속성 정보가 포함된 RDF로 변환시킨다. 이 논문에서는 제안 시스템을 자바 기반의 프로토타입으로 구현하며, 비교 평가를 위해 관계형 데이터베이스에 저장된 데이터를 RDF로 변환하는 실험을 수행하고 결과를 D2RQ, RDBToOnto, Morph와 비교한다. 제안 시스템은 다른 연구들에 비해 변환한 온톨로지가 풍부한 의미관계를 표현하며, 데이터 변환 시간에서 가장 우수한 성능을 보인다.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1225-1239
• /
• 2016

We investigate pediatric tumor incidence data collected by the Florida Association for Pediatric Tumor program using various models commonly used in disease mapping analysis. Particularly, we consider Poisson normal models with various conditional autoregressive structure for spatial dependence, a zero-in ated component to capture excess zero counts and a spatio-temporal model to capture spatial and temporal dependence, together. We found that intrinsic conditional autoregressive model provides the smallest Deviance Information Criterion (DIC) among the models when only spatial dependence is considered. On the other hand, adding an autoregressive structure over time decreases DIC over the model without time dependence component. We adopt weighted ranks squared error loss to identify high risk regions which provides similar results with other researchers who have worked on the same data set (e.g. Zhang et al., 2014; Wang and Rodriguez, 2014). Our results, thus, provide additional statistical support on those identied high risk regions discovered by the other researchers.

• Spatial Information Research
• /
• 제20권5호
• /
• pp.91-98
• /
• 2012

본 연구는 BIM과 GIS간 상호운용성을 위해 외부 BIM 참조 모델을 제안한다. 이를 위해 BIM과 GIS간 상호운용성과 관련된 연구 현황과 유즈케이스들을 조사하였다. 그리고 이러한 상호운용성 지원을 위한 CityGML 모델 확장을 위해 IFC와 CityGML의 구조를 분석하였다. 이런 결과를 바탕으로 IFC로부터 CityGML로 맵핑하는 규칙을 정의한 메타 데이터를 포함한 외부 BIM 참조 모델을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.788-789
• /
• 2011

A comprehensive thermo-electromagnetic model has been developed to estimate temperature and electromagnetic distribution in an three-phase induction motor under steady state operation. Electromagnetic modeling enables us to predict thermal dissipation rates by eddy-current loss and copper loss in induction motors. Non-uniform temperature distributions are investigated to account for the strong effect of local temperature build-up on the motor performance and expected life-span. For more accurate thermal modeling purpose, Heat loss mapping method, which is matched up with electromagnetic losses and volumetric heat source, is developed and performed analysis. Heat loss mapping method can be greatly used as a design or diagnostic tool for three-phase induction motors with complex structural electromagnetic fields.

• 산업공학
• /
• 제19권4호
• /
• pp.281-290
• /
• 2006

The main objective of this study is to analyze the structure of efficiency of R&D input variables and the attributes of patent information as output of R&D activities in the major manufacturing industries (electric & electronics, machinery, chemical, textile) from the mid-1970s to the late-1990s by the development of "mapping technique". To attain this objective we first have examined the attribute of time-lag which depends on the absolute, and the cumulative values between input and output. And on the basis of this result, we have made an analysis on the impact to extract the main variables affecting patent by industries. Moreover, according to time trend of the impact variables, we have analyzed the structure of R&D efficiency, and of technological progress which will be changed with time by patent information. It has been aimed at constructing technological progress patterns in the Korea industry.