• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.107-116
• /
• 2014

The purpose of this study is to verify the applicability of concept mapping in the process of planning social welfare program based on community network. Concept mapping is a kind of decision-making method that structuralized complex ideas and presented visually. Already, concept mapping is widely utilized in counseling, nursing and public health area to plan and evaluation their program and service. For recent, effectiveness of concept mapping has been reported. Concept mapping is a effective decision-making method that they recognize outcome gap between service provider and client, reach the outcome's consensus in counseling and nursing, medical area. In this study, we conceptualized 3rd year outcomes of Community Impact Project that was supported from Busan Chest using concept mapping. This CI project intervenes children and youth who lives in Buk-gu, Busan. Concept mapping has six stages-preparation, collecting ideas, structuring statements, representing statement, interpreting the results of the analysis, applying the results. We followed these steps. The participants were working at social welfare organizations, total 11 persons. We obtained 60 statements and analyzed using multidimensional scaling. we collected 5 clusters, cluster 1 'awareness and attitude change of children and youth', cluster 2 'social system change of children and youth', cluster 3 'friendly community formation', cluster 4 'community people change', cluster 5 'service provider change'. As a result, among total 5 clusters formed, 'awareness and attitude change of children and youth' came to the strongest outcomes. When concept mapping was applied to the program planning, the consensus of the opinion came easily in the decision-making process, and the participants were empowered. In addition, clear conceptualization on each element of the program planning was made.

• Journal of The Korean Association For Science Education
• /
• v.15 no.2
• /
• pp.223-232
• /
• 1995

The purpose of this study is to investigate the effect of concept mapping strategies on the learner's achievement and their attitude change in science learning. The subject was 159 male students in a middle school in Seoul. Three experimental groups were instructed with different kinds of teaching methods about the unit of photosynthesis and digestive organs. Group I was instructed with traditional teaching method, GroupII was instructed with guided concept mapping strategy, GroupIII was instructed with student-centered concept mapping strategy. The major findings of this study are as follows. 1. Student-centered concept mapping strategy was observed effective at 0.05 significance level in achievement and retention. 2. Only student-centered concept mapping strategy changed students' attitude toward science learning positively. 3. It was observed that there was very significant correlation between the learning ability and science achievement (p<0.01). 4. Student-centered concept mapping strategy was found effective in upper learning-ability group, and guided concept mapping strategy in middle learning-ability group(p < 0.05). 5. Student-centered concept mapping strategy was effective to the groups of upper and middle learning-ability in changing students' attitude toward science learning(p < 0.05).

• ETRI Journal
• /
• v.37 no.2
• /
• pp.338-347
• /
• 2015

The multi-carrier transmission signal in Multi-Carrier Code Division Multiple Access (MC-CDMA) has a high peak-to-average power ratio (PAPR), which results in nonlinear distortion and deteriorative system performance. An n-tuple selective mapping method is proposed to reduce the PAPR, in this paper. This method generates $2^n$ sequences of an original data sequence by adding n-tuple of n PAPR control bits to it followed by an interleaver and error-control code (ECC) to reduce its PAPR. The convolutional, Golay, and Hamming codes are used as ECCs in the proposed scheme. The proposed method uses different numbers of the n PAPR control bits to accomplish a noteworthy PAPR reduction and also avoids the need for a side-information transmission. The simulation results authenticate the effectiveness of the proposed method.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.108-117
• /
• 2020

This study proposes a robust range-only beacon mapping method for registering the locations of range-only beacons automatically. The proposed method deals with the multipath propagation of signals from range-only beacons using the range-only measurement association (RoMA) and an unscented Kalman filter (UKF). The RoMA initially predicts the candidate positions of a range-only beacon. The location of the range-only beacon is then updated using the UKF. With the proposed method, the locations of range-only beacons are accurately estimated in a multipath environment. The proposed method also provides the location uncertainty of each range-only beacon. Simulation results using the model for multipath propagation and experimental results in a real indoor environment verify the performance of the proposed method.

• Journal of Computing Science and Engineering
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2016

An efficient texture compression method is proposed based on a block matching process between the current block and the previously encoded blocks. Texture mapping is widely used to improve the quality of rendering results in real-time applications. For fast texture mapping, it is important to find an optimal trade-off between compression efficiency and computational complexity. Low-complexity methods (e.g., ETC1 and DXT1) have often been adopted in real-time rendering applications because conventional compression methods (e.g., JPEG) achieve a high compression ratio at the cost of high complexity. We propose a block matching-based compression method that can achieve a higher compression ratio than ETC1 and DXT1 while maintaining computational complexity lower than that of JPEG. Through a comparison between the proposed method and existing compression methods, we confirm our expectations on the performance of the proposed method.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1209-1220
• /
• 2020

In the case of forest areas, the installation of ground control points (GCPs) and the selection of terrain features, which are one of the unmanned aerial photogrammetry work process, are limited compared to urban areas, and safety problems arise due to non-visible flight due to high forest. To compensate for this problem, the drone equipped with a real time kinematic (RTK) sensor that corrects the position of the drone in real time, and a 3D flight method that fly based on terrain information are being developed. This study suggests to present a method for investigating damage using drones in forest areas. Position accuracy evaluation was performed for three methods: 1) drone mapping through GCP measurement (normal mapping), 2) drone mapping based on topographic data (3D flight mapping), 3) drone mapping using RTK drone (RTK mapping), and all showed an accuracy within 2 cm in the horizontal and within 13 cm in the vertical position. After evaluating the position accuracy, the volume of the landslide area was calculated and the volume values were compared, and all showed similar values. Through this study, the possibility of utilizing 3D flight mapping and RTK mapping in forest areas was confirmed. In the future, it is expected that more effective damage investigations can be conducted if the three methods are appropriately used according to the conditions of area of the disaster.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.152-153
• /
• 2011

• Korean Journal of Mathematics
• /
• v.18 no.2
• /
• pp.105-118
• /
• 2010

The purpose of this paper is to consider an iterative method for an equilibrium problem and a family relatively nonexpansive mappings. Weak convergence theorems are established in uniformly smooth and uniformly convex Banach spaces.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.185-185
• /
• 2011

Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.259-260
• /
• 2007

In this paper, we propose a novel computational integral imaging reconstruction (CIIR) method using round-type mapping model. Proposed CIIP method can overcome problems of non-uniformly reconstructed images caused from the conventional method and improve the resoulution of 3-D images. To show the usefulness of the proposed method, both computational experiment and optical experiment are carried out and their results are presented.