• Steel and Composite Structures
• /
• v.44 no.4
• /
• pp.473-488
• /
• 2022

A high-speed railway (HSR) bridge may undergo long-term deformation due to the degradation of material stiffness, or foundation settlement during its service cycle. In this study, an analytical model is set up to evaluate the influence of this long-term vertical bridge deformation on the track geometry. By analyzing the structural characteristics of the HSR track-bridge system, the energy variational principle is applied to build the energy functionals for major components of the track-bridge system. By further taking into account the interlayer's force balancing requirements, the mapping relationship between the deformation of the track and the one of the bridge is established. In order to consider the different behaviors of the interlayers in compression and tension, an iterative method is introduced to update the mapping relationship. As for the validation of the proposed mapping model, a finite element model is created to compare the numerical results with the analytical results, which show a good agreement. Thereafter, the effects of the interlayer's different properties of tension and compression on the mapping deformations are further evaluated and discussed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2012

With the development of MEMS, small and low-priced sensors integrating IMU and GPS have produced and exploited for diverse field. In this research, we have judged that MEMS-based IMU/GPS sensor is suitable for light-weighted mobile mapping system and carried out experiments to analyze the characteristics of MTi-G, which was developed from XSens company. From a sensor which fixed to dashboard, coordinates results with no post-processing were achieved for test area. On the whole, the results show satisfactory performances but some errors also were discovered from parts of the road due to sensor properties, XKF characteristics and GPS reception environment. We could confirm the potential of light-weighted mobile mapping system. Experiments considering various GPS reception environments and road condition and more detailed level of accuracy analysis will be performed for further research.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.70-75
• /
• 1999

Adaptive control in the robotic GMA(Gas Metal Arc) welding is employed to monitor the information about weld characteristics and process paramters as well as modification of those parameters to hold weld quality within the acceptable limits. Typical characteristics are the bead geometry composition micrrostructure appearance and process parameters which govern the quality of the final weld. The main objectives of this paper are to realize the mapping characteristicso f penetration through the learning. After learning the neural network can predict the pene-traition desired from the learning mapping characteristic. The design parameters of the neural network estimator(the number of hidden layers and the number of nodes in a layer) were chosen from an error analysis. partial-penetration single-pass bead-on-plate welds were fabricated in 12mm mild steel plates in order to verify the performance of the neural network estimator. The experimental results show that the proposed neural network estimator can predict the penetration with reasonable accuracy and gurarantee the uniform weld quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1113-1119
• /
• 2002

In this paper, it was presented that broadly delivered scanner devices can also used in finger print recognition process and then modified existing steps of fingerprint image Processing. First, using the adaptive binary method, that effect was certified already, increased the effect of the results. And then, applying table mapping methods that looks for elements from look-up table, decreased the processing time, too. Finally, it was presented that ridge-direction characteristics extracted from these processes can used effectively In the area of fingerprint recognition system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.848-854
• /
• 2002

The nonlinear characteristics for the hinge of a deployable missile control fin are investigated experimentally. The nonlinearity is caused by a worn or loose hinge and manufacturing tolerance and cannot be eliminated completely. The structural nonlinearity has an effect on the static and dynamic characteristics of the control fin. Therefore, it is necessary to establish the accurate nonlinear model for the hinge of the control fin. In the present study the existence of nonlinearities in the hinge is confirmed from the frequency response experiments such as tip random excitation and base sine sweep. Using the system identification method, especially, “Force-State Mapping Technique”, the types of nonlinearities are identified and the nonlinear hinge model of the control fin is established.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.174-179
• /
• 1998

In this paper, the radar altimeter for topographic mapping over land is introduced and the characteristics of the return signals are analyzed. The radar system is described briefly and the requirements to get the fine resolution of the terrain surface height are considered. The designed radar altimeter was tested on the landscape in the near of Stuttgart. The measured data shows very fine profile of the test landscape and the height errors induced from different geometrical structure of the land surface are acquired in the measurement. In the test area, most characteristics of radar return signals over land could be tested and the results of the topographic mapping using our radar altimeter can be used for future radar altimeter development for land applications.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.851-858
• /
• 2017

Parkinson's disease is a growing and chronic movement disorder, and its diagnosis is difficult especially at the initial stages. In this paper, movement characteristics extracted by a computer using multilayer back propagation neural network mapping are converted to the symptoms of this disease. Then, modulation of three classifiers of C4.5, k-nearest neighbors, and support vector machine with majority voting are applied to support experts in diagnosing the disease. The purpose of this study is to choose appropriate characteristics and increase the accuracy of the diagnosis. Experiments were performed to demonstrate the improvement of Parkinson's disease diagnosis using this method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.386-390
• /
• 2002

In this paper, it was presented that broadly delivered scanner devices can also used in finger print recognition process and then modified existing steps of fingerprint image processing. First, using the adaptive binary method, that effect was certified already, increased the effect of the results. And then, applying table mapping methods that looks for elements from look-up table, decreased the processing time, too. Finally, it was presented that ridge-direction characteristics extracted from these processes can used effectively in the area of fingerprint recognition system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.138-148
• /
• 2003

Orthogonal Cross Cylinder mapping and segmentation based modeling methods have been implemented for constructing the image-based navigation system in this paper. The Orthogonal Cross Cylinder (OCC) is the object expressed by the intersection area that occurs when a cylinder is orthogonal with another. OCC mapping method eliminates the singularity effect caused in the environment maps and shows an almost even amount of area for the environment occupied by a single texel. A full-view image from a fixed point-of-view can be obtained with OCC mapping although it becomes difficult to express another image when the point-of-view has been changed. The OCC map is segmented according to the objects that form the environment and the depth value is set by the characteristics of the classified objects for the segmentation based modeling. This method can easily be implemented on an environment map and makes the environment modeling easier through extracting the depth value by the image segmentation. An environment navigation system with a full-view can be developed with these methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.479-485
• /
• 2011

A number of case studies that find distribution of longevity population and influencing factors through the spatial data fusion using GIS techniques are growing. The majority cases of these studies are adopt census administrative boundary data for the spatial analysis. However, these methods cannot fully explain the phenomenon of longevity because there are a variety of spatial characteristics within the census administrative boundaries. Therefore, studies of spatial unit are required that realistically reflect the phenomenon of human longevity. The dasymetric mapping method enables to product of spatial unit more realistic than census administrative boundary map and statistic estimates of small area utilizing diversity spatial information. In this study, elderly population of small area has been estimated within statistically significant level that applied the vector based dasymetric mapping method. Also, the cluster analysis confirmed that the variation of local spatial relationship within census administrative boundary. The result of this study implied that the need for local-level studies of the human longevity and the validity of the dashmetric mapping techniques.