• 한국컴퓨터정보학회논문지
• /
• 제7권1호
• /
• pp.147-153
• /
• 2002

경영, 설계, 제조, 판매를 총체적으로 결합하는 생산 시스템인 컴퓨터 통합생산시스템 CIM(Computer Integrated Manufacturing System)의 개발이 이루어졌다 CIM에서는 경영 설계, 제조, 판매 등을 컴퓨터를 통하여 유기적으로 연결함으로써 빠른 시장변화에 따른 대응을 시도하고 있다 각 시스템간의 정보전달과 실제작업의 지시 및 동작은 정보네트워크에 의해 순간적으로 이루어지며 각 서브시스템에서 공유화되고 정확성, 신속성이 발휘되어 원가절감이나 품질향상, 납기준수 등에 기여하여야 한다. 본 연구의 목적은 CIM의 구축입안, 설계, 도입, 운용, 갱신 등의 어느 단계에 있어서도 적절한 평가를 행하는 것이다.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.21-29
• /
• 2010

본 연구는 시뮬레이션 방법을 이용한 자동차용 열 수축 튜브 생산 공정을 가상의 생산 공정 모델로 구현하고, 구현된 모델을 기반으로 열 수축 튜브 생산 공정을 분석하는 연구이다. 자동차용 열 수축 튜브 생산 공정을 분석하기 위해서 공정별로 생성되는 데이터를 수집하고, 수집된 데이터 분석을 통한 자동차용 열 수축 튜브 생산 공정을 분석할 수 있는 가상의 생산 공정 모델을 구현하였다. 구현된 모델을 통해 공정 내에서 발생되는 병목현상 파악 및 원인분석, 공정별 사이클 타임, 부품 생산량 등을 산정함으로써 현 공정 분석 및 개선방안을 모색할 수 있어 기업의 생산 공정관리 효율성을 높일 수 있다.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.108-112
• /
• 2023

Precision manufacturing technology is rapidly developing due to the extreme miniaturization of semiconductor processes to comply with Moore's Law. Accurate and precise alignment, which is one of the key elements of the semiconductor pre-process and post-process, is very important in the semiconductor process. The center detection of wafer align marks plays a key role in improving yield by reducing defects and research on accurate detection methods for this is necessary. Methods for accurate alignment using traditional image sensors can cause problems due to changes in image brightness and noise. To solve this problem, engineers must go directly into the line and perform maintenance work. This paper emphasizes that the development of AI technology can provide innovative solutions in the semiconductor process as high-resolution image and image processing technology also develops. This study proposes a new wafer center detection method through variable thresholding. And this study introduces a method for detecting the center that is less sensitive to the brightness of LEDs by utilizing a high-performance object detection model such as YOLOv8 without relying on existing algorithms. Through this, we aim to enable precise wafer focus detection using artificial intelligence.

• 발명특허
• /
• 제27권4호통권310호
• /
• pp.66-73
• /
• 2002

• 복식
• /
• 제58권1호
• /
• pp.33-44
• /
• 2008

The purpose of this study was to investigate the effects of the style and the color of jacket, the style of shirt, and stimulus-manufacturing method on men's image perception. A quasi-experimental method by questionnaire was used, and the experimental design was $2{\times}2{\times}2{\times}2$ (jacket style${\times}$jacket color${\times}$shirt style${\times}$stimulus-manufacturing method) factorial design. Computer simulation picture and photograph were used for stimulus-manufacturing method. Subjects were 377 women in the metropolitan area of Seoul. The data were analyzed by using factor analysis, Cronbach's ${\alpha}$-reliability coefficient, and three-way ANOVA. The men's image derived five dimensions by factor analysis; neatness, ability, activity, individuality, and sociability. Tailored jacket with jean pants was evaluated higher in ability, individuality, and sociality than jumper with jean pants, and jumper was evaluated higher than tailored jacket in activity. The indigo jacket was evaluated lower in individuality in the picture stimuli than in the photograph stimuli. The beige tailored jacket with jean pants was evaluated higher in activity than indigo tailored jacket. However, the indigo jumper was evaluated higher in activity than beige jumper. Dress shirt under the tailored jacket was evaluated higher in ability and individuality than T-shirt under the tailored jacket. T-shirt under the jumper was evaluated higher in activity than dress shirt.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.277-283
• /
• 2018

공기를 획기적으로 감소시킬 수 있는 모듈러건축으로 유사 모듈이 반복되는 공동주택을 건설하는 안에 대해 현행의 시공방법을 고찰한 결과 설비시스템에서 개선할 점을 발견하고, 그 방법으로 공장제작과 현장설치부분을 구분해서 살펴보고 현재 모듈러생산사 실무진의 의견과 종합건설사 기술담당자의 의견으로 그 가능성을 확인하고자 했으며 그 과정에서 제기된 문제에 대해 원천적인 관점에서 쉽게 풀어나갈 수 있는 방법으로 유리한 설계안을 제안하였고, 접속부위의 누수하자와 같은 고질적 문제점에 대한 대안을 기재하였다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.80-88
• /
• 2010

In a conventional system, hydraulic unit pumps out pressurized oil when the power use is not even necessary. As a result, it causes much power loss. This study is on the proposal of new hydraulic unit which controls the revolution of the pump in order to produce proper power needed and to have good response characteristic. In addition, the existing control methods such as PID control method, fuzzy control method, and adaptive control method are applied to the proposed hydraulic unit. Then the best control method is selected and the controller is developed to realize minimum power loss.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.34-44
• /
• 1997

This study presents the recursive constraint bounding(RCB) method to reduce the cycle time in internal cylindrical plunge grinding process. This method can cope with process noise as well as modeling bias. The main features of RCB method are its utilization of measurements at the end of each cycle and its use of monotonicity analysis for determining the extremes of bias and noise. This method is investigated in simulation and evaluated by experiment in internal cylindrical plunge grinding operation. The results from simulation and experiment show that it is effective in reducing cycle time in spite of modeling uncertainty in the forms of process noise and modeling bias.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.59-68
• /
• 1997

Recently, the cases of using bonded dissimiliar materials which have each of the different components tend to increase for the purpose of developing new materials and using the special objects in the field of industry. Among the cases the strength evaluation of the joining materials of vehicle engine and the structural materials with ceramic/metal bonded joints becomes more important. But the residual stress occurs, because the joining of ceramics and metals is performed in extremely high temperature. It becomes a dominant cause to reduce the strength of the ceramic/metal bonded joints. In this paper, strength evaluation method of ceramic/metal bonded joints considering stress singularity was investigated by boundary element method and 4-point bending test. An advanced method of quantitative strength evaluation for ceramin/metal bonded joints is to be suggested.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.36-44
• /
• 2000

In this paper drill shape and cutting conditions for environmentally conscious dry drilling of A319 Al-alloy are studied by experimental method. The experiment is planned with Taguchi's method that is based on the orthogonal array of design factors. The result is summarized as follows (1) Drill geometry optimization can increase the number of holes in dry drilling and also large helix angle and large point angle are desirable in dry drilling. (2) It is found that cutting conditions that is cutting speed and feed rate are closely related to the drill geometry(3) For dry drilling of Al-alloys drill shape and cutting conditions are selected and tested by experimental method. But it is found that the perfect dry drilling is difficult because of the machining characteristics of Al-alloys and so new machining method such as minimal lubricant application is required.