• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.61-64
• /
• 2001

This study relates to a method for manufacturing a solid electrolytic capacitor using a functional polymer composition. The method comprises immersing the rolled aluminum electrolytic capacitor device in polyaniline solution with high electric conductivity to impregnate the device with polyaniline, drying the impregnated device in a drying oven which is maintained at constant temperature to fully remove the solvent, inserting the dried device to a capacitor aluminum can and then sealing with epoxy resin, to manufacture a solid electrolytic capacitor using a conducting polymer. As such, the impregnation can be performed well at not only normal temperature and pressure, but also high temperature and reduced pressure. The solid electrolytic capacitor has the advantages of high capacity, low impedance and low ESR, and also, low manufacturing cost, simple processes and high reliability.

• Journal of Engineering Education Research
• /
• v.23 no.5
• /
• pp.61-67
• /
• 2020

In the associate degree curriculum of the department of mechanical engineering, the results of the study are presented on the structure and content of a subject based on the case-based learning method. As an case, equipment called a laminator that is actually used in the manufacturing site was selected. Class deals with specific engineering issues at each stage of laminator manufacturing (design-machining-assembly-measurement-maintenance) in connection with general engineering topics in prerequisites in the curriculum. Topics include tolerance fit, length measurement, assembly practice, measurement design and statistics of machine maintenance, etc. Courses that apply the case-based learning method may be included in the curriculum as complementary roles to those that apply other student-centered learning method.

• Microbiology and Biotechnology Letters
• /
• v.38 no.2
• /
• pp.124-128
• /
• 2010

Vaccines, especially for viruses, have been produced from egg-based manufacturing process. The method is simple and easy to set up the manufacturing process. However, the method has many problems in quality control, limit of manufacturing capacity, and ethical issues. Over the last decade, an alternative method, which manufactures vaccines using cell culture-based system, has received great attention to overcome the problems in egg-based vaccine production. This article examines current status and perspectives of cell culture-based vaccine production.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.3
• /
• pp.276-281
• /
• 2007

Oddi is a mulberry fruit that has anti-inflammatory and antioxidative effects. This study was carried out to investigate the quality characteristics of mulberry fruit wines manufactured by two different methods. Where they were processed according to the traditional Korean fruit wine methodology(A) or a modified(B). Sensory qualities, physiochemical characteristics, and biochemical activities of the Oddi wines were analyzed. From the results of the sensory evaluation, manufacturing method A showed higher acceptability. However, the two different methods was not significantly different overall. The method A wine had higher brightness(L)(77.65) redness(a), and yellowness(b). As for the antioxidant activities and ACE(angiotensin-converting enzyme) inhibitory abilities of the wines manufacturing method A had greater values.

• Current Photovoltaic Research
• /
• v.10 no.3
• /
• pp.90-94
• /
• 2022

The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent technology development of crystalline silicon solar cell is proceeding to reduce the manufacturing cost while improving the efficiency. Therefore, screen printing requires process development to reduce a line width of an electrode and decrease shading area. In this paper, we will discuss the development trend and prospects of screen-printing metallization using metal paste, which is currently used in manufacturing commercial crystalline silicon solar cells.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.261-267
• /
• 2013

In automobile company it is needed to establish the collaborative relationship between the assembly company and the part manufacturing company. In this paper we established the improvement for the procurement logistics and logistics in assembly company and thus we derived the near optimal procurement cycle through the simple EXCEL simulation and the improved inventory management method for H automobile company in CHINA. At this time we adopted the pull manufacturing process instead of push manufacturing process. We resulted that the manufacturing activity of both companies was stabilized and the usage of storage area in assembly company was reduced by 50%, especially it was reduced by 100% in the case of directly delivering the parts to assembly line through the third party logistics company.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.110-115
• /
• 2003

This paper is concerned with the compression test and forming process of flange by using virtual reality and analysis(simulation) program. This virtual manufacturing can be carried out one personal computer without any expensive devices for experiment. The virtual manufacturing composed of three modules such as the imput, calculation and the output modules on internet. Internet user can give the material's property and process parameters to the sever computer at the input module. On the calculation module, a simulator computes the virtual manufacturing process by analysis program and stores the data as a file. The output module is the program in which internet user can confirm virtual manufacturing results by showing tables, graphs, and 3D animation. This programs is designed by an internet language such as HTML, CGI, VRML and JAVA ,while analysis programs use the finite increasing, the virtual manufacturing technique will substitute many real experiments in the future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.233-236
• /
• 1999

In this paper, we carried out fundamental experiments to use the steel manufacturing slag as a concrete aggregate. Generally there are two types of slag, the blast-furnace slag and the steel manufacturing slag. The latter is classified by the difference of manufacturing method of steel into the convertor slag and the electric-furnace slag. The steel manufacturing slag mainly contains SiO2 and CaO as the chmical composition. The reaction with water and a little of free CaO in the steel manufacturing slag makes the expansion of volume change. Therefore, we primarily investigated physical properties, expansion mechanism, pH value, aging effects and aging methods in the steel manufacturing slag. Then compressive strength of concrete with steel slag aggregate is measured.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.555-560
• /
• 2002

This paper addresses the methodologies for manufacturing systems design. While a number of design methods are used in product or part design, methods for manufacturing systems design are rarely known. Two approaches, simulation and axiomatic design theory, are discussed with respective case examples. The usual purpose of using simulation is to identify the bottleneck of a manufacturing system or to evaluate its performance with the aim of configuring the manufacturing system. The simulation typically proceeds in steps such as problem definition, model building, numerical experimentation, analysis and evaluation. The axiomatic design method transforms customer attributes into functional requirements and repeats mapping processes between functional domain and physical one until a satisfactory level of refinement of the functional requirements and the design parameters is reached. Possible design alternatives are evaluated by applying the independence axiom as well as the information axiom.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.540-545
• /
• 2002

The tight integration of the part design and process planning is very effective to high quality product development and cost effective manufacturing. Moreover, the integration in the early design stage, that is, the integration of the conceptual design and the conceptual process planning may take a big impact with the forecasting the alternative of the design and manufacturing. In this paper, the real field parts are studied about the relations among the Feature, Function, and Manufacturing Process taking the style of reverse engineering method, to found the base of the systematic computer system for the integrated product design and manufacturing process planning.