• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.14-21
• /
• 1997

In delay-optimized designs, timing failures due to manufacturing delay defects are more likely to occur because the average timing slacks of paths decrease and the system becomes more sensitive to smaller delay defect sizes. In this paper, the impact of delay optimized logic circuits on delay fault testing will be discussed and compared to the case for non-optimized designs. First, we provide a timing optimization procedure and show that the resultant density function of path delays is a delta function. Next we also discuss the impact of timing optimization on the yield of a manufacturing process and the defect level for delay faults. Finally, we will give some recommendations on the determination of the system clock time so that the delay-optimized design will have the same manufacturing yield as the non-optimized design and on the determination of delay fault coverage in the delay-optimized design in order to have the same defect-level for delay faults as the non-optimized design, while the system clock time is the same for both designs.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.3
• /
• pp.129-135
• /
• 2012

A number of surface mount technology (SMT) process variables including land design are considered for minimizing tombstone defect in flexible printed circuit assembly in high volume manufacturing. As SMT chip components have been reduced over the past years with their weights in milligrams, the torque that once helped self-centering of chips, gears to tombstone defects. In this paper, we have investigated the correlation of the assembly process variables with respect to the tombstone defect by employing statistically designed experiment. After the statistical analysis is performed, we have setup hypotheses for the root causes of tombstone defect and derived main effects and interactions of the process parameters affecting the hypothesis. Based on the designed experiments, statistical analysis was performed to investigate significant process variable for the purpose of process control in flexible printed circuit manufacturing area. Finally, we provide beneficial suggestions for find-pitch PCB design, screen printing process, chip-mounting process, and reflow process to minimize the tombstone defects.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.124-125
• /
• 2023

Defect detection during liquid crystal display (LCD) manufacturing has always been a critical challenge. This study aims to address this issue by proposing a data augmentation method based on generative adversarial networks (GAN) to improve defect identification accuracy in LCD production. By leveraging synthetically generated image data from GAN, we effectively augment the original dataset to make it more representative and diverse. This data augmentation strategy enhances the model's generalization capability and robustness on real-world data. Compared to traditional data augmentation techniques, the synthetic data from GAN are more realistic, diverse and broadly distributed. Experimental results demonstrate that training models with GAN-generated data combined with the original dataset significantly improves the detection accuracy of critical defects in LCD manufacturing, compared to using the original dataset alone. This study provides an effective data augmentation approach for intelligent quality control in LCD production.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.76-82
• /
• 1997

The discrimination of flaw shape and sizing is very important subject in the material evaluation for semiconductor and new materials. The aim of this paper is to investigate the spectrum analysis of artificial defect signal captured from steel ball embedded in the resin. The results show that it can be evaluated quantitatively the size of artificial defect, from the amplitude variation of same frequency if the probe with same diameter and focal length is used. Comparing with the amplitude variation of the high frequency component and low frequency component obtained from the distance of defect center position, it can be estimated steel ball and flat bottm defect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.444-452
• /
• 2008

This paper presents an overall image processing approach of defect inspection of patterned TFT-LCD panels for the real manufacturing process. A prototype of AOI(Automatic Optical Inspection) system which is composed of air floating stage and multi line scan cameras is developed. Adjacent pattern comparison algorithm is enhanced and used for pattern elimination to extract defects in the patterned image of TFT-LCD panels. New region merging algorithm which is based on border expansion is proposed to identify defects from the pattern eliminated defect image. Experimental results show that a developed AOI system has acceptable performance and the proposed algorithm reduces environmental effects and processing time effectively for applying to the real manufacturing process.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2145-2152
• /
• 2013

Paper manufacturing industries have huge facilities with automatic equipments. Especially, in order to improve the efficiency of the paper manufacturing processes, it is necessary to detect the paper cutting defect effectively and to classify the causes correctly. In this paper, we review the problems of web monitoring system and web inspection system that have been traditionally used in industries for defect detection. Then we propose a novel paper cutting defect detection method based on the local binary pattern analysis and its implementation to mitigate the practical problems in industry environment. The proposed algorithm classifies the defects into edge-type and region-type and then it is shown that the proposed system works stably on the real paper cutting defect detection system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.45-51
• /
• 2013

Friction stir welding using aluminum alloys has been widely applied for transportation vehicles because of the light specific weight, which can be used to obtain sound joint and high mechanical properties. This study shows the effects of rotation speed, welding speed, welding load, and tool shape on defect formation with extruded AA6005, which is used for railway vehicle structures of non-uniform thickness welded by friction stir welding using load control systems. Optical microscopy observations and liquid penetrant testing of each FSW joint were carried out in order to observe defect formation. Two kinds of defects, that of probe wear and that of lack of penetration in the bottom of the welded zone, were observed. In the case of using a taper shaped tool, the defect free zone is very narrow, within 100 kgf; however, in case of using a cylindrical shape tool, the defect free zone is wider.

• Journal of Applied Reliability
• /
• v.18 no.1
• /
• pp.87-94
• /
• 2018

Purpose: In this study, the defect quantification of thin metal plate was evaluated by using lock-in infrared thermography. Methods: A STS304 standard specimens, which had the artificial-defects of different size, were used. The focal distance between the infrared camera and the specimen was set to 500mm, and the distance between the lump and the specimen was set to 200mm. One halogen lamp with a maximum capacity of 1kW was used, and phase-lock infrared thermal images with a frequency of 1Hz were captured and analyzed. Result: Objectively quantified data values were obtained by analyzing the contrast ratio and signal-to-noise ratio. Conclusion: The possibility of defect diagnosis for thin metal plate was confirmed by using the lock-in infrared thermography technique.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.2.1-2.7
• /
• 2018

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.