• Korean Journal of Poultry Science
• /
• v.26 no.1
• /
• pp.1-25
• /
• 1999

Concerns about meat quality, including chicken meat, for the human diet has led to many attempts to manipulate the carcass fat and increase the eating quality. For actual eating quality, the birds must be grown and finished in a manner that results in meat that are tender, succulent and of good flavor, as well as being free from any foreign taint, flavor or safety hazard. Tenderization treatment with high voltage(820V) electrical stimulation and prechill muscle tensioning would improve the tenderness of chicken meat. Proper programs for the withdrawal of feed and water require a team approach for maximizing yield of meat and minimizing carcass contamination. Also effding of supplemental levels of-tocopherol to poultry with vegetable or fish oils increases of desirable polyunsaturated fatty acid(PUFA) content and stablizes the meat against rancidity and fish off-flavors. The nutritional effects of varying dietary ingredients on broiler carcass fat content are also important. Increasing the levels of energy in the ration increases the carcass fat content, while increasing the proteing levels decreases carcass fat content. Supplement-tation of poultry diets with amino acids such as methionine, lysine, glycine and tryptophan as well as amino acid such as well as amino acid mixtures can reduce body fat deposition. Normal stress leads to chicken muscular damage resulting in reduced meat quality, but this can be controlled by preslaughter management practices. Feed manufactures can utilize ntilize nutrient modulation to control pale soft exudative(PSE)syndrome. Finally, the success in poultry meat production depends on the consistent achievement of carefully selected levels of quality. Quality assurance should be the wider function of incorporating quality into the production system and the combination of motivating quality into actions and operations.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.131-137
• /
• 2016

The development of alternative water resources has emerged as an effective method for solving drought of water resources due to extreme weather and increase in water consumption. Recently, in Korea, there has been active research on reverse osmosis desalination technology, wastewater reuse using forward osmosis membranes, and the forward osmosis(FO)-reverse osmosis(RO) hybrid process combining these two technologies. In this study, the basic performance of FO membranes manufactured by three domestic and international manufactures such as Microfilter Co., Ltd., Toray Chemical Korea Inc., and Hydration Technologies Inc., were investigated for wastewater reuse. In addition, as an experiment to select feed solution, the selected membranes were operated 48 consecutive hours using three secondary effluents pretreated by the UF membrane with a pore size of $0.1{\mu}m$ and auto strainer with pore sizes of $1{\mu}m$ and $100{\mu}m$ as feed solution. Although there was not much difference in the operating performance. Thus, the treated water using the $100{\mu}m$ auto strainer was selected as feed solution applied to the assessment.

• Journal of Distribution Research
• /
• v.4 no.2
• /
• pp.1-20
• /
• 1999

This study aims to provide distributors with several implications on the channel strategy by testing factors which influence on the offsetting investment. Medium-sized distributor facing a relatively inferior power can cause profit vulnerability from large manufacurer's opportunistic behaviors. At the same time, we tested the relationship commitment to the relation with manufacturer as another alternative strategy taken by medium-sized distributer. For this research, samples from dealers in oil-petroleum refinery industry were selected and the data was collected using mail survey. The data was analyzed utilizing validity test, reliability test, factor analysis, correlation analysis and LISREL. The major analyzed results are as follows: First, the offsetting investment of preventing loss from manufacturer's opportunism didn't affect medium-sized distributor's sales empirically. Second, the hypothesis that the more the medium-sized distributor's transaction specific assets which they invest in the transactional relationship with manufacturer, the more the safeguard against the expected opportunism of manufacturer was not supported by the results. Third, the more use of coercive power by the manufacturer, the more increase in the perception of expected opportunism of manufacturer by the medium-sized distributor, it make stimulates offsetting investment as safeguard by medium-sized distributor and it has negative effect on developing commitment. Finally, the large manufactures dealing with a medium-sized distributor firm which had a reputation of fairness didn't make offsetting investment as a response for distributor's opportunism.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.45-49
• /
• 2006

Silk Industry doesn't have enough strategic ability to plan the product for internal and external strong competition and global luxury trend in Jinju. To provide silk fashion planning information and planning method, this study investigated the fabric planning system, such as product system and problems, the method of seeking information, via questionnaires for 68 Jinju silk companies. The results were that the Korean traditional garment, Han-bok and lining of that were given more wight in Jinju Silk for domestic, and the next, neckties. These silk had produced by OEM and didn't have almost my planning ability, but nowadays buyers wanted to get some planning ideas from manufactures, not giving any planning guideline before production, more and more. For Jinju Silk Fabric Companies, planning direction of silk fabrics of vision were needed, that had to be adaptable to manufacture situation and applicable to market.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.141-142
• /
• 2011

The increase in oil prices and the rising environmental concerns are boost the electric vehicle supply. Vehicle manufactures understand this trend quite well and plan to increase the production of electric vehicle(EV) such as Nissan LEAF and GM VOLT etc.. The growth of intermittent renewable energy sources such as solar and wind power requires utilities to find additional grid coupled energy storage and regulation capacity. EVs have a battery pack and a charger. The charger can be able to deliver power back to the grid from the vehicle's battery as well as charge the battery. The concept of deploying EVs to stabilize the electric power grid is generally referred to as Vehicle-to-Grid(V2G). We present the grid service using V2G.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.1014-1025
• /
• 1996

The magnetizer that is magnetizing the magnet which is used for RGB (Red Green Blue) control of CRT(Cath-ode-Ray Tube)and the magnet inspection unit which is used for test the state of magnetizing have been imported by magnet manufactures up to now. They are operation by manual now, so that they are needed lots of time and have an increase in probability of malefunction by operator. In this study, we have developed a united system from the magnet production process to inspection ork to automaized a entire progress. Therefor, as we are testing the status of every work and analyzing exactly the distribution in quality with this system, we have known that the reliability of magnetization and magnetized status test has not only increased, but the rate of inferior quality almost not generated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.1
• /
• pp.88-93
• /
• 2004

I The Purpose of this study is to look in to the production of high-functional clothing industry, such as item, style, layout, labor, suggest some effective solutions and alternatives for them. 23124554 For this purpose, the companies specialized in manufacturing of special high-functional clothings were sampled for a survey using interview and a questionnaire. The results of this study can be summarized as follows; It was found that since demands for high-functional apparels are low and their sewing processes are much complicated requiring expensive equipments, only a few companies are engaged in such apparels. In addition, since the quantity of order s small and material inputs are more frequently changed, the sewing processes on the production line need to be changed together with the production layouts. On the other hand, as the materials used are very special, expensive equipments should be used, for which the companies feel much burdensome financially. Accordingly, t is deemed necessary for the high-functional apparel manufactures to specialize the processes requiring specialized equipments or outsource some of them or recruit highly-skilled workers.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.231-234
• /
• 2005

In this paper, propose device that all of AC Power could do switching because uses fire flame sensor(UV TRON R2868) and sensor driving circuit. Used OrCAD program for analysis of consisted Power On/Off Set, and this manufactures and experimented driving circuit actually. The experimental result is considered that can refer to data of circuit design in case of apply to actual field of practical use that need alarm after sense flame, and special quality that give an alarm sensing flame in experiment wave and given environment relatively stable. With this result Power On/off Set and that action of embodied serrounding system can utilize actually verify.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.626-628
• /
• 1992

GCB(Gas Circuit Breaker) and GIS(Gas Insulated Switchgear) using $SF_6$ are worldwidely applied over 72.5KV classes. It Is known that $SF_6$ gas has the most superior characteristics among the extingushing and insulating media. Our Company has produced GCB and GIS from early 1980's and at present, we are producing 362KV 40KA class which is the highest voltage in our country. According to change KEPCO's standards (ESB standards), our company has redeveloped and tested for all productions type from 1989. During redeveloping, we largely contribute raise reliability of power system, through all the more improvement for performance and quality of manufactures. One of them, we developed 170KV 50KA GCB with common three-pole operating mechanism and sucessfully completed test of KERI under KEPCO presence, at first in our country. Thus, we announce the outline of it.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.3
• /
• pp.183-188
• /
• 2014

Power conversion systems used in large gas turbine power plant can be divided into two main part. Because of the initial start-up characteristic of the gas turbine combustor, the gas turbine must be accelerated by starting device(LCI : Load Commutated Inverter) up to 10%~20% of rated speed to ignite it. In addition, the ECS(Excitation Control system) is used to control the rotor field current and reactive power in grid-connected synchronous generator. These two large power conversion systems are located in the same space(container) because of coordination control. Recently, many manufactures develop high speed controller based on function block available in the LCI and ECS with the newest power semiconductor. We also developed high speed controller based on function block to be using these two system and it meets the international standard IEC61131 as using real-time OS(VxWorks) and ISaGRAF. In order to install easily these systems at power plant, main controller, special module and IO module are used with high speed communication line other than electric wire line. Before initial product is installed on the site, prototype is produced and tests are conducted for it. The performance results of Integrated controller and application program(SFC, ECS) were described in this paper. The test results will be considered as the important resources for the application in future.