• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.29-35
• /
• 1986

This study was carried out to examine the effect of aluminium sulfate addition to the alkali-acid catalyst phenolic resin for the manufacture of the kapur (Dryobalanops spp.) plywood on the reduction of phenolic resin spreading. On the manufacture of plywood, Adhesive Contents such as 50g/$m^2$, 75g/$m^2$ and 150g/$m^2$ were treated. The spreading adhesive content of 50g/$m^2$ and 75g/$m^2$ had been controlled to about 150g/$m^2$ added with the water in order to get sufficient spreading and controlled to pH 4.5 with aluminium sulfate [$Al_2(SO_4)_3$]. The results are summarized as follows: 1. Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.77 to 0.86 and their moisture contents met the KS requirements. 2. In dry and wet shear strengths, 150 $P_{Al{\cdot}Ac}$ adhesive showed the highest and 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive indicated higher value than 150 $P_{Al{\cdot}Ac}$ adhesive. 3. In case of glue shear strength after boiling test, 150 $P_{Al{\cdot}Ac}$ adhesive was the best and adding of aluminium sulfate was not effective on reinforcement of boiling water resistance of phenolic resin, but met KS requirements. 4. 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive showed the good shear strength and met KS requirements. Therefore, adding of aluminium sulfate was very efficient for economical plywood manufacture.

• Journal of Korean Medical classics
• /
• v.29 no.2
• /
• pp.79-90
• /
• 2016

Objectives : Treatment using foods has already been recorded since the time of Zhou Dynasty of China. Modifications in the cooking process of medicinal food or manufactural process of herbal medicines are accompanied by the alterations in the ingredients that affect the actual efficacies of medicinal food or herbal medicine, and may have marked effects on the patients including the difficulties that may be experienced in consuming the food or taking the medicine. Therefore, systemic management is essential in such processes. Accordingly, management of such knowledge system must be standardized and conveniently administered by grafting IT technology. This study aims to overcome the problem of the failure of the knowledge system on the material-oriented medicinal herbs to apply the knowledge on the cooking process that impart marked influence on the actual efficacies of the medicinal herbs. Methods : Therefore, analysis of the cooking process or manufacturing processes of prescriptions was executed by using the morphological analysis method in natural language. In this study, we aimed to make data structure of the terminologies that represent manufacture process of prescription and medicinal food. The data structure is combinations of smallest unit in natural language. We made the database by analyzing morpheme of the natural language to express the manufacture process of prescription and medicinal food. Results & Conclusions : As the results, we can express making process of Cheonjin-won, Guseon-wangdogo and Sanyagbaegboglyeongtalagjuk in DB. It was concluded that the development of DB through the extraction of a total of 15 types of concepts including 'order', 'action' and 'continuous action', etc. was helpful in systematization of the knowledge on medicinal herbs including the manufacturing process.

• Environmental and Resource Economics Review
• /
• v.25 no.2
• /
• pp.277-297
• /
• 2016

This study is to analyze the effects of changing pattern of climate vaariables on total factor productivity of Korea manufacture industry. Changes in temperature, rainfalls and humidity which are the representative climate variables are used as main factors. Not only average values of the variables but those highest values are used as independent variables in the model, in order to consider the characteristic pattern of recent climate change, the high volatilities. The OLS results are unlike to previous literature that temperature and humidity had no significant impact on manufacturing productivity. An increase in the amount of precipitation was analyzed that impact negatively impacted. The analysis of panel data showed that temperatures and precipitation all that does not significantly affect the manufacturing. While the increase of the average humidity is shown to increase the total productivity of manufacture industry. In Korea, adaptation capability is important in determining the effects of climate change on productivity of manufacture industry.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.34-41
• /
• 2018

This paper studied balanced regional development focused on employment in Korea, by analyzing regional disparity between regional and industrial employment. A Gini-coefficient decomposition method and Panel Granger causality test were conducted, using raw data of the Census on Establishments reported by the Statistics Korea. The regional and industrial disparity of employment, based on the Gini-coefficient decomposition method, have increased by year. However, the growth rates of disparity are on the decrease. Most of employment disparity occurred from regional disparity between SMA (Seoul Metropolitan Area) and Non-SMA. Industrial disparity are occurred mainly by the service industry. The amount of contribution to the whole disparity of inter/intra regional employment was differed by each industrial sector. Also the causal relationship between employment growth of manufacture and that of service industry was analyzed by Panel Granger causality test. In national level, the employment growth in manufacture industry has conduced that in service industry. On the other hand, in the Non-SMA, only the employment growth in manufacture industry has augmented that in service industry. In conclusion, to reduce employment disparity, the strategy for balanced regional development should be emphasized. Different strategies are needed across regions and industries. Basically creating new job in the Non-SMA is inevitable. In view of stable employment, manufacture industry is more desirable rather than service industry.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.1
• /
• pp.24-37
• /
• 2022

Objectives : The purpose of this literature review is to analyze process of manufacture and formulation and toxicity of Geumgweyoryak(金匱要略)'s external applicants for modern and safe using. Methods : This study used the Geumgweyoryak(金匱要略) reprinted by Zhao Kaimei(趙開美) as basic data for a understanding of the manufacture and formulation and toxicity for external applicants. Among the 25 chapters, the 22 chapters were studied except for the last three chapters, which are known to be written by later writers. Based on the above, Geumgweyoryeok(金匱要略)'s external applicants was analyzed the process of manufacture, formulation and the toxicity. Results : There are 11 types of external applicants of Geumgweyoryak(金匱要略). Washing method(洗法) was used 2 times, Drop method(瀝法) was used 1 time, Smoke method(熏法) was used 2 times, Rubbing method(摩法) was used 1 time, Plaster method(敷法) was used 2 times, Invading method(浸法) was used 1 time, Suppository method (坐法) was used 2 times, Flatiron method(烙法) was used 1 time. According to classified the modern formulation, there are 4 types of powder formulation, 4 types of liquid formulation, 2 types of suppository, and 1 type of Semi-solid formulation. Especially toxic drugs, such as Realgar(雄黃) or Hydrocerussite(鉛粉), should be careful. When Realgar(雄黃) smokes, a toxic substance called AS2O3 can come out. Hydrocerussite(鉛粉) can cause lead poisoning. Lead increases the risk of anemia, dehydration, and lead neuropathy when chronically exposed. Conclusion : We supposed that this study can serve as a basic data to help clinical Korean doctors to use the prescription for external applicants more safely and to easily apply it in the form of external applicants.

• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.72-83
• /
• 2000

In recent years considerable progress has been made in the characterisation of surface finish in three dimensions, and in the development of protocols which can be used for international standardisation. Although the subject as it has currently developed has much further to go if the process of surface characterisation is to impact on manufacture, control and specification of the manufacturing process itself. Researchers in this important area are beginning to realise that if the subject is to have great impact on manufacturing industries, surface characterisation must be broadened to include measures of surface integrity of the component and in addition be related to the functional demands imposed on the surface. The functional demands being a requirement of the engineering situation in which the components are employed. If these three factors are considered simultaneously, surface characterisation, surface integrity and component function, then a new and important subject is born, the subject of the Engineered Surface. Part 1 of this paper attempts to draw together the elements which go together to create the subject, 'The Engineered Surface'. The paper presents a method by which this important subject can be developed to the benefit of manufacturing industries. The paper also discusses the importance of a co-ordinated approach to the subject and the way that information can be documented to eventually provide a useful atlas of controlling parameters which are essential for a range of material processing industries as they strive to meet the ever more stringent and cost effective requirements of the manufacture.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.361-371
• /
• 2014

Mycoplasma is well recognized as one of the most prevalent and serious microbial contaminants of biologic manufacturing processes. Conventional methods for mycoplasma testing, direct culture method and indirect indicator cell culture method, are lengthy, costly and less sensitive to noncultivable species. In this report, we describe a new TaqMan probe-based real-time PCR method for rapid and quantitative detection of mycoplasma contamination during manufacture of biologics. Universal mycoplasma primers were used for mycoplasma PCR and mycoplasma DNA was quantified by use of a specific TaqMan probe. Specificity, sensitivity, and robustness of the real-time PCR method was validated according to the European Pharmacopoeia. The validation results met required criteria to justify its use as a replacement for the culture method. The established real-time PCR assay was successfully applied to the detection of mycoplasma from human keratinocyte and mesenchymal stem cell as well as Vero cell lines artificially infected with mycoplasma. The overall results indicated that this rapid, specific, sensitive, and robust assay can be reliably used for quantitative detection of mycoplasma contamination during manufacture of biologics.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.29-37
• /
• 2020

This research seeks to determine the influence of investment opportunity set (IOS); profitability (Return on Assets - ROA), liquidity, business risk and firm size on debt policy. We used 42 manufacturing companies registered on the Indonesian Stock Exchange (Bursa Efek Indonesia) as object research. We used purposive sampling method to determined samples, consider the period observation from 2012 to 2016, and produce 168 units analysis. Data analysis uses the multiple regressions with the SPSS tools. The results of the study found that companies' debt policies in Indonesia are negatively affected by the liquidity. Investment opportunity set (IOS) has negative effect on debt policy. Meanwhile, ROA, Return on Invested Capital (ROIC), and firm size of a company has no impact on debt policy. These findings indicate that Indonesian manufacture companies do not see the high investment opportunity set and profitability as a policy basis for increasing debt. Moreover, the high profitability also does not cause companies to increase their debt ratio. Our study indicates that Indonesian manufacture companies use internal funds to fund their investment. This finding is a concern for creditors, as they can now see the ability of the companies, and especially their performance, in determining their credit policies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.190-194
• /
• 2001

The integration of rapid prototyping and tooling has the potential for the rapid net shape manufacturing of three-dimensional parts with geometrical complexity. In this study, a new rapid prototyping process, transfer type of Variable Lamination Manufacturing (VLM-ST), was proposed to manufacture net shape of 3-D prototypes. In order to examine the efficiency and applicability of the proposed process, various 3-D parts, such as a world-cup logo, and extruded cross and a knob shape, were fabricated on the apparatus. In addition, the new rapid tooling process, which is a triple reverse process, was proposed to manufacture of 3-D functional part using VLM-ST prototypes and the plastic part of the knob shape was produced by the new rapid tooling process.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2017

In the era of the forth Industrial Revolution, open source code and open source hardware have gained much attention. In particular, 3D printing technology is expanding into the realms of classical science, technology and our daily lives. Relatedly, in the present study, we demonstrate the manufacture of a nano-LC MALDI spotter robot using 3D printing technology. The parts of the spotter robot were either made using a 3D printer or purchased as 3D printer parts from the 3D printer online market, so that anyone can make the robot without a deep knowledge of engineering or electronics, i.e., DIY (do-it-yourself) product. In the nano-LC MALDI spotter, the nano-LC eluent and MALDI matrix were mixed in a T-union and discharged from the capillary outlet. The eluent and matrix mixture could be spotted onto the movable MALDI plate. The MALDI plate was designed to translate in a two-dimensional space (xy plane), which was enabled by the movements of two stepper motors. In the paper, all computer-aided design (CAD) files for the parts and operation software are provided to help the reader manufacture their own spotter robot.