• 한국안전학회지
• /
• 제14권4호
• /
• pp.93-99
• /
• 1999

A try was carried out to reduce lead time of die manufacturing. That is to make manual machining and finishing work time shorter by improving CAD/CAM modeling methods, so called with "separate modeling" and "relief modeling". The manual machining and finishing manual work time were reduced adapting the novel CAD/CAM modeling methods. Ultimately we accomplished much reduction of the lead time of die manufacturing.f die manufacturing.

• 대한의생명과학회지
• /
• 제15권3호
• /
• pp.229-232
• /
• 2009

DNA isolation for PCR-based short tandem repeat (STR) analysis is essential to recover high yields of amplifiable DNA from low copy number (LCN) DNA samples. There are different methods developed for DNA extraction from the small bloodstain and gloves, commonly found at crime scenes. In order to obtain STR profiles from LCN DNA samples, DNA extraction protocols, namely the automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ method, the automated $QIAcube^{TM}$ method, the automated $Maxwell^{(R)}$ 16 DNA $IQ^{TM}$ Resin method, and the manual $QIAamp^{(R)}$ DNA Micro Kit method, were evaluated. Extracted DNA was quantified by the $Quantifiler^{TM}$ Human DNA Quantification Kit and DNA profiled by $AmpFISTR^{(R)}$ $Identifiler^{(R)}$ Kit. Results were compared based on the amount of DNA obtained and the completeness of the STR profiles produced. The automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ and $QIAcube^{TM}$ methoas produced reproducible DNA of sufficient quantity and quality trom the dried blood spot. This two automated methods showed a quantity and quality comparable to those of the forensic manual standard protocols normally used in our laboratory. In our hands, the automated DNA extraction method is another obvious choice when the forensic case sample available is bloodstain. The findings of this study indicate that the manual simple modified $QIAamp^{(R)}$ DNA Micro Kit method is best method to recover high yields of amplifiable DNA from the numerous potential sources of LCN DNA samples.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.377-386
• /
• 1993

The purpose of this study was to evaluate the disinfection efficacy of root canal irrigation method and irrigation solution in infected root canals. Access cavity were prepared in single-rooted extracted human teeth and each canals were prepared with step-back method and sterilized with ethylene oxide gas. Prepared teeth were experimentally inoculated in the canals for 30 minutes with four aerobes(Streptococcus mutans, Stapylococcus aures, Streptococcus sanguis, and E. coli) and two anaerobes(Streptoccus intermedius, and Clostrium perfringens). Normal saline, 3% $H_2O_2$, and 3% NaOCl were used as irrgation solutions. And root canals were irrigated with each irrigation solutions manually with disposible syringe or ultrasonic instument. (Apoza Uitrasonc, Taiwan). The irrigation effect on the eradication of S. aures and S. intermedius with normal saline was not similar between manual method and ultrasonic method. No significant differences were observed in the eradication of E. coli and C. perfringens among the irrigation solution and irrespective of the irrigation methods. In S. aurues and S. mutans, there was somewhat different eradication effect according to irrigation solutions, but there was no significant difference between manual method and ultrasonic methods. These results suggest that ultrasonic irrigation method with saline is more effective in some strains than manual irrigation.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.109-120
• /
• 1996

Cardiac function is evaluated quantitatively using angiographic images via the analysis of the shape change or the heart wall boundaries. To kin with, boundary defection or ESLV(End Systolic Lert Ventricular) and EDLV(End Diastolic Left Ventricular) is essential for the quantitative analysis of cardiac function. The boundary detection methods proposed in the past were almost semi-automatic. Intervention by a knowledgeable human operator was still required Of con, manual tracing of the boundaries is currently used for subsequent analysis and diagnosis. This method would not cut excessive time, labor, and subjectivity associated with manual intervention by a human operator. EDLV images have noncontiguous and ambiguous edge signal on some boundary regions. In this paper, we propose a new method for automated detection of boundaries in noncontiguous and ambiguous EDLV images. The boundary detection scheme which based on a priori knowledge information is divided into two steps. The first step is to detect the candidate edge points of EDLV using ESLV boundaries. The second step is to correct detected boundaries of EDLV using the LV shape. We developed the algorithm of modifying EDLV boundaries defined adaptive modifier. We experimented the method proposed in this paper and compared our proposed method with the manual method in detecting boundaries of EDLV. In the areas within estimated boundaries of EDLV, the percentage of error was about 1.4%. We verified the useflilness and obtained the satisfying results througll the experiments of the proposed method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.51-54
• /
• 2013

Purpose: The purpose of this study is to evaluate the difference between open reduction and internal fixation (ORIF) and intermaxillary fixation (IMF) of mandibular fractures. Methods: A total of one hundred twenty-seven patients who were treated for mandibular fractures at Chosun University Dental Hospital, from January 2008 to December 2010, and analyzed their prognoses based on the use of IMF at the time of fracture reduction. The patients were divided into two groups; the manual reduction group without IMF and IMF group. Results: After reduction of the mandibular fracture, good results were obtained with majority patients. Nonetheless, seven patients (13.0%) in manual reduction method without arch bars or IMF, developed complications after surgery. Three patients underwent IMF due to occlusal instability after surgery, while one patient underwent re-operation. Thus, a significant difference was not observed between the IMF and manual reduction groups. Conclusion: Manual reduction and IMF at mandibular simple fracture could produce good results. In case of mandibular simple fracture, it was recommended with only manual reduction without IMF or IMF during a short period.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.9-16
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of intermittent lumbar traction and manual traction on a $L_{4-5}$ herniated disc. Method: The subjects were randomly divided into the intermittent lumbar traction group (n=10) and the manual traction group (n=10). The intermittent traction group had traction-treatment applied for 12 times in the first two weeks, and then 6 times in the next two weeks. The time the traction was applied was for 30 minutes. The manual traction group had flexion-distraction therapy applied for 12 times in first two weeks, and for 6 times in next two weeks. The time the traction was applied was 3 to 6 minutes per treatment. Results: The change of the muscle test (MT), the disc herniation index (DHI) and the sagittal $T_2$ weighted MRI was measured at pretreatment and 4weeks and 12weeks after treatment. Conclusion: We found that intermittent lumbar traction and manual traction could improved the MT and DHI and this could improve the rehabilitation of patients with lumbar herniated disc.

• 한국응급구조학회지
• /
• 제22권3호
• /
• pp.67-76
• /
• 2018

Purpose: The purpose of this study was to evaluate the quality of chest compressions and ventilation when using an mechanical device(LUCAS) and 2-men manual cardiopulmonary resuscitation(CPR) performed on a minikin, as well as to propose a more effective CPR method during transit. Methods: Data were collected by LUCAS and manual virtual reality based ambulance simulation. Analysis was performed using SPSS software 12.0. The average and standard deviation of chest compression depth and ventilation were analyzed using descriptive statistics and t-test. Results: In the virtual reality based LUCAS and manual CPR results, LUCAS showed better chest compression and lower incomplete chest release than manual CPR. During CPR with a chest compression-ventilation ratio of 30:2 in virtual reality ventilation with bag-valve mask was able to deliver an adequate volume of breathing. Conclusion: It is suggested that rescuers on ambulance may consider using LUCAS as an alternative to high-quality chest compression during transit.

• 대한물리의학회지
• /
• 제13권2호
• /
• pp.43-51
• /
• 2018

PURPOSE: Stroke patients have limited ankle range of motion and balance problems. The purpose of this study was to determine the effects of Kaltenborn orthopedic manual therapy, Evjenth-hamberg stretching, and combination of both on ankle dorsiflexion range of motion and dynamic balance ability in stroke patients. METHODS: Thirty patients were placed in three groups, each of which received different treatments: Kaltenborn orthopedic manual therapy (15 mins), Evjenth-hamberg stretching (15 mins), or Kaltenborn orthopedic manual therapy with Evjenth-hamberg stretching (30 mins). Each group received three exercise sessions per week during four weeks. To determine its effectiveness of interventions an evaluation was carried out. ankle dorsiflexion range of motion was gauged using a tiltmeter application, and dynamic balance ability was measured using the Berg balance scale. RESULTS: All groups revealed significant improvements in ankle dorsiflexion range of motion, Berg Balance Scale (BBS) score before and after the intervention, and Kaltenborn orthopedic manual therapy with Evjenth-hamberg stretching group showed a significant improvement in ankle dorsiflexion range of motion and BBS score in comparison to other groups. CONCLUSION: We found out that each individual method was effective in ankle dorsiflexion range of motion, dynamic balance ability in stroke patients, and the combined method was more effective.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.39-46
• /
• 2017

Finite element model updating is very effective procedure to determine the uncertainty parameters in structural model and minimize the differences between experimentally and numerically identified dynamic characteristics. This procedure can be practiced with manual and automatic model updating procedures. The manual model updating involves manual changes of geometry and analyses parameters by trial and error, guided by engineering judgement. Besides, the automated updating is performed by constructing a series of loops based on optimization procedures. This paper addresses the ambient vibration based finite element model updating of long span reinforced concrete highway bridges using manual model updating procedure. Birecik Highway Bridge located on the $81^{st}km$ of Şanliurfa-Gaziantep state highway over Firat River in Turkey is selected as a case study. The structural carrier system of the bridge consists of two main parts: Arch and Beam Compartments. In this part of the paper, the arch compartment is investigated. Three dimensional finite element model of the arch compartment of the bridge is constructed using SAP2000 software to determine the dynamic characteristics, numerically. Operational Modal Analysis method is used to extract dynamic characteristics using Enhanced Frequency Domain Decomposition method. Numerically and experimentally identified dynamic characteristics are compared with each other and finite element model of the arch compartment of the bridge is updated manually by changing some uncertain parameters such as section properties, damages, boundary conditions and material properties to reduce the difference between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of long span highway bridges. Maximum differences between the natural frequencies are reduced averagely from %49.1 to %0.6 by model updating. Also, a good harmony is found between mode shapes after finite element model updating.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.252-260
• /
• 2020

Objective: Disorder of the autonomic nervous system is considered to be the cause of primary dysmenorrhea. The spine has a close relationship with the autonomic nervous system, and the sacrum is mechanically and neurologically connected to the uterus through ligaments. Therefore, this study was conducted to check the effect on the autonomic nervous system through measurement of heart rate variability by applying manual therapy to the sacroiliac joints of subjects with primary dysmenorrhea and to suggest an effective treatment method for dysmenorrhea. Design: Randomized controlled trial. Methods: Thirty females with dysmenorrhea were assigned to either the manual therapy group and sham treatment group according to the random treatment method. The manual therapy was applied to the sacroiliac joints, and the sham treatment was only treated with the hands placed in the same position of the intervention. Heart rate variability and the Visual Analogue Scale (VAS) were measured on the day when menstruation began ±2. Interventions were performed between the groups, followed by a 5-minute break and then re-measurements were made. Results: There were significant differences in autonomic balance and VAS scores in the manual therapy group before and after the intervention between groups (p<0.05). In the sham treatment group, there were significant differences in low frequency, autonomic balance, and VAS scores (p<0.05). There were significant differences in autonomic balance between groups (p<0.05). Conclusions: In females with primary dysmenorrhea, manual therapy applied to the sacroiliac joint was found to be effective for a short time on autonomic activity.