• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.111-117
• /
• 2004

Most of digital subtraction methods in dental radiography are based on registration using manual landmarks. We have developed an automatic registration method without using the manual selection of landmarks. By restricting a geometrical matching of images to a region of interest (ROl), we compare the cross-correlation coefficient only between the ROIs. The affine or perspective transform parameters satisfying maximum of cross-correlation between the local regions are searched iteratively by a fast searching strategy. The parameters are searched on the 1/4 scale image coarsely and then, the fine registration is performed on the original scale image. The developed method can match the images corrupted by Gaussian noise with the same accuracy for the images without any transform simulation. The registration accuracy of the perspective method shows a 17% improvement over the manual method. The application of the developed method to radiography of dental implants provides an automatic noise robust registration with high accuracy in almost real time.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.119-130
• /
• 2002

Objective: The purpose of this research was to use data for furnish quality physical therapy service. The research subjects were admitted shoulder pain patients treated with physical therapy that was to grasp physical therapy method as distinguishing application time. Subject: Total number of distributed questionnaire was 563 persons that was to utilized physical therapy room of 56th medical institution and distributed it to each physical therapist in charge. Method: The research used questionnaire in order to research itemized treatment application time that is according to physical therapy method to applicated with shoulder pain patient. The research contents is to received shoulder pain diagnosis period, total duration of utilizing physical therapy room, the number of times per week to used physical therapy room, etc. And we had physical therapist recording the time of application physical therapy method come under the items. Result: The average treatment time was 59.2 minutes at all patients. During this time, 39.7 min was modality treatment. Active movement treatment was only 7.1 min. Total treatment time was longest in general hospital at 64.9 min, it was shortest in clinical hospital at 53.3 min. Treatment time was difference as hospital scale(p<0.001). Active movement treatment time was longest in general hospital at 11.5 min. The average treatment time was 4.5 min in clinical hospital. Therefore, it was related to hospital scale(p<0.05). The average of manual therapy time by physical therapist was 7.5 min. General hospital was linger at 8.6 min than clinical hospital at 6.7 min(p<0.05). Patient of 90.2 % were treated to hot pack, ultra-sound treatment was next as 50.1%. Active strengthening exercise was most carrying out of the active treatment as 25.4 %. Active sensorimotor exercise was practiced only 28 persons of 5.0 %. Most joint mobilization (38.4 %) was used of the passive manual therapy items, next to soft tissue mobilization (33.0 %), and next to manual distraction therapy(14.0 %).

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1365-1370
• /
• 1990

We have developed a new fuzzy control method for paper machine basis weight profile. The conventional linear control method has not yielded good results on some machines. This new control method, however, realizes long-term stability and convergence of the profile as good or better than that achieved under manual control by an operator.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.131-134
• /
• 2009

Purpose: Mandible fractures are common in maxillofacial trauma and the incidence of condylar fracture is high. The management of mandibular condylar fracture continues to be controversial. Conservative treatment of it may lead to complications such as asymmetry, malocclusion, temporomandibular joint dysfunction. Moreover, open reduction can cause facial nerve injury, parotid gland injury, scarring and hematoma formation. We present a case of mandibular condylar fracture that was treated by manual reduction without incision under C-arm fluoroscopy. Methods: A 76-year-old female was admitted due to left side mandibular condylar fracture that required surgical intervention. Because of her age, history of diabetes mellitus, hypertension, she underwent closed manual reduction under general anesthesia. We adopted C-arm fluoroscopy as a method of identifying the fracture site and a evaluation of reduction state. C-arm fluoroscopy was set up like modified Towne's view. Results: The reduction was successful and didn't result in any complications that could occur in open reduction-facial nerve injury, infection, parotid gland injury, hematoma, avascular necrosis. The mandibular-maxillary fixations were removed after 4 weeks and patients were could open 3.5 cm after 6 weeks with physical therapy. Conclusion: We tried closed manual reduction of mandibular condylar fracture due to high risk of complication using C-arm fluoroscopy and did achieve anatomic reduction with avoiding open incision. This is simple, effective, reversible, time saving and fairly attemptable method in condylar fracture cases before open reduction.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.3
• /
• pp.355-365
• /
• 2000

The purpose of this research was to find out the effect of chest physiotherapy on the amount of tracheal secretion and $PaO_2$. After changing position of the neurosurgical patients who had tracheostomy cannula, experimental treatments were applied as bellows, manual chest percussion on groupI, chest percussion and manual chest vibration on groupII, chest percussion and mechanical chest vibration on groupIII were done. After these trials, we have analyzed the efficacy of each procedures comparing the group differences in the quantity of tracheal secretion and $PaO_2$. Target samples were sixty patients aged between 20 to 60 who have tracheostomy state and decreased consciousness status that were admitted in NICU of a university hospital from June 1 to August 31, 1999. They assigned randomly into three experimental groups. To compare the effect of each interventions, tracheal secretion quantify was measured and $PaO_2$ was analyzed via arterial blood gas analyzer. The data were analyzed by ANCOVA of 5% significance level using SPSS P/C program. The results were as bellows. 1) The first hypothesis 'There is a difference In the quantify of the secretion among GroupI, GroupII and GroupIII' was accepted.(F=29.27, p=0.00) 2) The second hypothesis 'There is a difference in $PaO_2$ among GroupI, GroupII and GroupIII' was rejected.(F=1.71, p=0.19) From this study results, positional change and manual chest vibration including chest percussion were the most effective treatment to get maximum amount of tracheal secretion and it was confirmed that mechanical chest vibration also made much better effect than sole chest percussion method. Therefore, we concluded that the mechanical or manual chest vibration with chest percussion is more effective respiratory care method than the sole chest percussion.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.458-465
• /
• 2013

Ship design engineering refers to the development and design of shipbuilding architectures in a drawing which reflects all relevant manufacturing processes. This paper provides analysis methods for model-information interfaces between hull structure design and outfitting design, and a technical application for manufacturing phases reflecting the pipe support pad and angle item automatically. The existing information procedure of pipe support pad and angle system processes information using drawing without model specification. Outfitting design team directly distributes drawings to the shop floor then manual-based marking and installation work are conducted refer to the distributed drawings. As a result, this process has become time consuming and causes problems in the productivity and quality improvement due to the rework caused by omitted or incorrect marking. The pipe support pad and angle marking is a method that automatically updates model information to hull structure design using sets of data that analyse the generated model in outfitting design processes. Therefore, this approach provides an efficient solution through design references without manual activities such as a reflection of hull structure design, cutting process, numerical control work, and dimension measurement and marking. The conversion of a method from the existing procedure based on manual marking to the reflective and automatic approach would have enabled to proceed installation work without manual activities for the measurement. Therefore, this research study proposes an efficient approach using pre-data analysis of model information interfaces between design and manufacturing phases to improve productivity during construction for shipbuilding.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.358-361
• /
• 2004

The objective of establishing IETM (Interactive Electronic Technical Manual) is not the just making into on-1 me system of technical manuals such as specifications. It is to produce construction standard documents in an electronic manual system to turn technical contents such as construction methods in technical manuals into multimedia information. Also, it is to maximize real-time information delivery by using visual data of construction sites. IETM enables to check not only design standards in the design but also applied situation of a construction method based on proper design standards and historical construction data on a real time basis. This study suggests a modeling method of IETM applicable to design and construction phase. The study includes a framework and a scenario for developing design IETM for construction project.

• Journal of TMJ Balancing Medicine
• /
• v.1 no.1
• /
• pp.13-18
• /
• 2011

Objectives: We investigated muscle force from the upper limb lifting resistance test to conform the objectivity in manual muscle test. Methods: We made standard method in upper limb lifting resistance test to compare with experiment method switching the lower limb position left & right. And resistance forces of upper limb of subject were checked to inspector with closing eyes. Results: 1. The lifting resistance of right upper limb was stronger when the lower limb of right and left were abducted. 2. The lifting resistance of right upper limb was weaken when the lower limb of right and left were adducted. 3. The lifting resistance of right upper limb was weaken when the lower limb of right and left were elevated. Conclusions: As the above results, the deltoid muscle force checked in the upper limb lifting resistance test is affected by the location of lower limbs, it suggested that the muscle force of some part in the body will be affected by the other parts. It will be useful to understand the symmetry principle of body in muscle function.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.377-384
• /
• 2018

The chamber method is widely used for measuring methane emission from paddy rice fields. The closed static chamber has advantages of easy installation and removal in the field and low manufacturing cost. However, the manual chamber method requires a lot of labor and has a limited sampling time and frequency. To overcome the disadvantages of the manual chamber, the auto-chamber system is used for measuring methane emission. We compared the differences in methane flux between the auto-chamber and manual chamber. To investigate methane emissions by the two methods, a chamber was installed for each of the following treatments : control without rice straw (NA), spring plowing after autumn rice straw application (SPRA) and autumn plowing after autumn rice straw application (APRA). The total methane emission was lowest in the control and highest in APRA with both methods. There was no significant difference in total methane emission between the methods, but dynamic fluctuation in methane with temperature change was accurately measured in the auto-chamber. Measuring methane emission with an auto-chamber system is expected to reduce uncertainty and increase accuracy, accompanied by labor reduction.

• Korean Journal of Acupuncture
• /
• v.27 no.1
• /
• pp.49-62
• /
• 2010

Objective: This study was performed to investigate the effect of manual acupuncture, invasive laser acupuncture and laser skin irradiation at LU8, LR4, HT8 and LR2(Liver Seunggyeok) on D-galN-induced liver injury in rats. Method: Liver injury was induced with D-galN. The experimental rats were divided four groups(Control group, EXP-1, EXP-2, EXP-3). In the Control group, liver injury-induced and not treated. EXP-1 group was liver injury-induced and carried out manual acupuncture with Young-Su(against the meridian course and following the course of the meridian) & Won-Bang(by twisting and rotating the needle) acupuncture method at Liver Seunggyeok. EXP-2 group was liver injury-induced and carried out invasive laser acupuncture at Liver Seunggyeok. EXP-3 group was liver injury-induced and carried out laser skin irradiation at Liver Seunggyeok. Result: In the change of body weight(in 1 week), EXP-1, EXP-2 and EXP-3 groups were significantly increased as compared with control group. In the change AST & ALT, EXP-1 and EXP-2 groups were significantly decreased as compared with control group. In the change of SOD, EXP-1, EXP-2 and EXP-3 groups were significantly increased as compared with control group. In the change of WBC, EXP-2 group was significantly increased as compared with control group. Conclusion: Manual acupuncture, invasive laser acupuncture and laser skin irradiation at Liver Seunggyeok had hepatotherapeutic effect on the treatment of hepatocytotoxity. Invasive laser acupuncture was as effective as manual acupuncture on the treatment of hepatocytotocity.