• 대한전기학회논문지:전력기술부문A
• /
• 제48권9호
• /
• pp.1140-1146
• /
• 1999

In this paper, a force estimation method is proposed for force control without force sensor. For this , a disturbance observer is applied to each joint of an {{{{ { n}_{ } }}}} degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer due to internal torque, the disturbance observer output estimator(DOOE) is designed, where uncertain parameters of the robot manipulator are adjusted by the gradient method to minimize the performance index which is defined as the quadratic form of the error signal between the output of disturbance observer and that of DOOE. when the external force is exerted, the external force is estimated by the difference between the output of disturbance observer and DOOE, since output of disturbance observer includes the external torque signal as well as the internal torque estimated by the output of DOOE. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples and experimental results are illustrated for the 2-axis direct drive robot manipulator.

• 한국산업융합학회 논문집
• /
• 제18권3호
• /
• pp.139-149
• /
• 2015

In this paper, we describe a new approach to perform real-time implementation of an robust controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for robot manipulator consisting of dual arm with eight degrees of freedom at the joint space and cartesian space.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.260-270
• /
• 1994

With the prevalent use of robot, the interests in moving speed of robot have been increasing for the purpose of upgrading performance of production. But the faster robot manipulator moves, the worse working accuracies are. And mechanical vibration is more and more serious with the increment of the moving speed of robot. So, the study on the cause and control method of robot vibration is one of the points of issue in robotics. This paper focuses on the vibration of 3 DOF parallel link drive mechanism robot. We assume that links of robot manipulator are `rigid' and joints are `flexible elements'. Governing equations of robot system including controller, servo amplifier, D.C servo motor, transmission with elasticity, and manipulator dynamics are derived. On the basis of modelling, we define `controller stiffness' by the proportional gain of controller and `stiffness of transmission'. Numerical and experimental research is performed to study vibration phenomena of robot induced from the variation of these two defined stiffnesses, and its results are shown.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.428-433
• /
• 1997

This paper presents a new control strategy for the position and force control of flexible manipulators. The governing equation of motion of a two-link flexible manipulator which features piezoceramic actuators bonded on each flexible beam is derived via Hamilton's principle. The control torque of the motor to command desired position and force is determined by a sliding mode controller on the basis of the rigid-mode dynamics. In the controller formulation, the sliding mode controller with perturbation estimation(SMCPE) is adopted to determine appropriate control gains. The SMCPE is then incorporated with the fuzzy technique to mitigate inherent chattering problem while maintaining the stability of the system. A set of fuzzy parameters and control rules are obtained from a relation between estimated perturbation and actual perturbation. During the commanded motion, undesirable oscillation is actively suppressed by applying feedback control voltages to the piezoceramic actuators. These feedback voltages are also determined by the SMCPE. Consequently, accurate force and position control of a two-link flexible manipulator are achieved. Computer simulations are undertaken in order to demonstrate the effectiveness of the proposed control methodology.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.781-787
• /
• 2015

This paper proposes a hybrid visual servoing algorithm for the object tracking by a mobile robot with the stereo camera. The mobile robot with the stereo camera performs an object recognition and object tracking using the SIFT and CAMSHIFT algorithms for the hybrid visual servoing. The CAMSHIFT algorithm using stereo camera images has been used to obtain the three-dimensional position and orientation of the mobile robot. With the hybrid visual servoing, a stable balance control has been realized by a control system which calculates a desired angle of the center of gravity whose location depends on variations of link rotation angles of the manipulator. A PID controller algorithm has adopted in this research for the control of the manipulator since the algorithm is simple to design and it does not require unnecessary complex dynamics. To demonstrate the control performance of the hybrid visual servoing, real experiments are performed using the mobile manipulator system developed for this research.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.451-457
• /
• 2015

In this paper, we consider the observer design problem that truly reflects the nonlinear stiffness of the manipulators. The two key ideas of our design are that (a) estimation error dynamics of the manipulator equipped with accelerometer dose not dependent on nonlinearities at the link part, when the measured signals are the motor position and the output of the accelerometer and (b) the nonlinear stiffness is indeed a Lipschitz function. In order to effectively compensate the nonlinear stiffness, the gain of the proposed observer is carefully chosen from the ARE(algebraic Riccati equations) which depend on Lipschitz constant. Comparative simulation result verifies the effectiveness of the proposed solution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.455-458
• /
• 1988

In this paper, a grasping force control of robot hand is presented with consideration of workpiece dynamics. It is difficult to control a manipulator without the knowledge of Its dynamics, because its handling with unknown workpiece may bring about overshoots and vibrations. Then it is necessary to adjust control gains according to the handling workpieces in order to achieve good control performances. The authors propose a new control strategy which uses adaptive observer and VSS (${\underline{V}}ariable$ ${\underline{S}}tructure$ ${\underline{S}}ystem$) controller to subdue these overshoots and vibrations. Some simulations of the proposed method are carried out for a grasping system to control the grasping force to various workpieces, whose dynamics cannot be known in advance.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1759-1769
• /
• 1989

This paper presents the development of a simulator for an industrial robot. The simulator is characterized by a fully integrated dynamic model and a hardware oriented control scheme. The dynamic model includes the actuator dynamics as well as the manipulator dynamics to integrate the entire dynamics of the robot system. On the other hand, the control scheme is oriented as a hardware structure which is usually implemented in the industrial robot. That is to say, a conventional PI control law is used to regulate the position, the speed, and the current. A Pulse Wave Modulation (PWM)generator modulates the supplied voltage to the actuator. Since the simulator is consistent with the industrial robot system, it provides the essential design concepts for the development process of the robot. In practice, the simulator is applied to the SCARA robot which has been developed in GSIS. Here, it investigates the characteristics and performance of the robot with changing design parameters. Thus, the investigation furnishes criteria for the selection of acfuator, control gain, trajectory planning, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.381-385
• /
• 1992

In this paper, dynamic modeling and adaptive control problems for a space robot system are discussed. The space robot consist of a robot manipulator mounted on a free-floating base where no attitude control is applied. Using an extended robot model, the entire space robot can be viewed as an under-actuated robot system. Based on nonlinear control theory, the extended space robot model can then be decomposed into two subsystems: one is input-output exactly linearizable, and the other is unlinearizable and represents an internal dynamics. With this decomposition, a normal form-augmentation approach and an augmented state-feedback control are proposed to facilitate the design of adaptive control for the space robot system against parameter uncertainty, unknown dynamics and unmodeled payload in space applications. We demonstrate that under certain conditions, the entire space robot can be represented as a full-actuated robot system to avoid the inclusion of internal dynamics. Based on the dynamic model, we propose an adaptive control scheme using Cartesian space representation and demonstrate its validity and design procedure by a simulation study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.256-259
• /
• 1987

In this paper, a servo controller for a robot manipulator is developed. It consists of a conventional MRAS controller for each joint together with a feedback control to Dynamics compensation. To generale the control torque effectively a currant drive method is adopted. The speed of the actuator is measured by using a tachometer and the position of the link is measured by using a potentiometer. To show the effectiveness of the proposed control algorithm the proposed controller is tested in real time.