• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.3
• /
• pp.152-159
• /
• 2017

Objectives: The aim of this study was to investigate the effects of advancement magnitude and changes in mandibular plane angle on the stability of mandibular advancement. Materials and Methods: This retrospective cohort study evaluated the postoperative stability of mandibular advancement in class II skeletal subjects who underwent bilateral sagittal split osteotomy. Radiographs taken preoperatively, immediately postoperatively and 1 year postoperatively were traced and analyzed using linear and angular measurements. To determine horizontal and vertical relapse, an X-Y coordinate system was established in which the X-axis was constructed by rotating S-N downward by $7^{\circ}$ (approximation of the Frankfort horizontal plane) and the Y-axis was defined as a line perpendicular to the X-axis and passing through the point Sella. For certain reference points including point A, point B, pogonion and menton, the perpendicular distance between each point and both axes was determined and cephalometric variables were recorded as X and Y coordinates. Results: Twenty-five subjects were studied. A significant correlation between the amount of mandibular advancement and relapse in the B point (vertical and horizontal) and the pogonion point was observed (vertical and horizontal, P<0.001). Evaluation of data demonstrated a positive correlation between the mandibular plane angle (SN/ML) change and vertical relapse in the B point (P<0.05). A simple regression model demonstrated that 74% of horizontal relapse and 42.3% of vertical relapse in the B point was related to the amount of mandibular advancement. The receiver operating characteristic test showed that 8.5 mm mandibular advancement is related to a relapse rate of 1 mm or more in the pogonion, vertically or horizontally. Conclusion: The magnitude of mandibular advancement is a stronger surgical predictor for horizontal rather than vertical relapse at the B point. Changes in mandibular plane angle (SN/ML) during surgery affect vertical, but not horizontal relapse at the B point.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.135-142
• /
• 1992

This study was performed to define the anatomical position of the mandibular canal and the findings during the sagittal split ramus osteotomy of the mandible. The mandibles of 20 adult Korean were used. The dimension of mandibular canal from the mandibular foramen to the 1st molar was measured at 4 specific coronal-sectional location by CT scan. The results were as follows ; 1. The distance from the mandibular canal to the medial aspect of the buccal cortical plate was greatest($4.5{\pm}1.1mm$) at 2nd molar area and was not significantly greater than at any other section. 2. Buccal cortex was thickest($3.8{\pm}0.9mm$) at 2nd molar and thinnest ($2.5{\pm}0.3mm$) mandibular foramen um 3. The distance from the mandibular canal to the medial aspect of the lingual cortical plate was not significant at any sections. 4. The distance from the mandible canal to the inferior border of mandible was greatest at the mandibular foramen($20.7{\pm}3.9mm$). The canal was located more closely to the inferior border at 1st, 2nd molar area 5. The diameter of the mandibular canal was between $2.5{\pm}0.3mm$ and $2.8{\pm}0.6mm$. 6. The total mandibular thickness was greatest($21.1{\pm}2.6mm$) at 2nd molar area and narrowest($17.2{\pm}3.2mm$) at mandibular foramen area.

• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.104-120
• /
• 2008

Purpose: The purpose of this study was to assess the hard and soft tissue changes associated with mandibular bilateral sagittal split osteotomy and genioplasty. Methods: This is a retrospective study of 40 patients who underwent either bilateral sagittal split osteotomy for mandibular setback (BSSO group, n = 20) or in combination with advancement genioplasty (Genio group, n = 20). Lateral radiographs, were taken before and immediately after surgery, and at least 6 months after surgery. Results: Comparing hard and soft tissue changes between the BSSO group and Genio group, there were significant differences in the lower incisor, soft tissue B point (B'), and soft tissue Pogonion (Pg') (p < 0.5). The mean ratio of hard and soft tissue changes for B/B', Pg/Pg', and Menton/soft tissue Menton after surgery in the BSSO group was 0.997, 0.965, and 1.022 respectively, and 0.824, 0.602, and 0.887 respectively in the genio group. Significant differences were found between the two groups. There were significant differences in lip thickness (B-B', Pg-Pg') in the Genioplasty group between pre and postsurgery, but not in the BSSO group. Pogonion to Labrale inferior and B' had a correlation coefficient of 0.833, 0.922, respectively for the BSSO group, and 0.775, 0.799 for the Genio group. Conclusions: The results indicate that there is a significant difference between bilateral sagittal split osteotomy with or without genioplasty in the lower facial esthetics values. The combination of mandibular setback and genioplasty had a smaller change in soft tissue thickness of the symphysis area after surgery than that of mandibular setback only.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.1
• /
• pp.24-29
• /
• 2009

When performing the inferior alveolar nerve block anesthesia, surgeon often faced a difficulty of the surgical operation due to the incomplete anesthesia. One of the reason is the variety of mandibular canal anatomy. Up to now, there are some reports of index cases about bifid mandibular canal among mandibular canal anatomic variation, and some classification is applied according to anatomical location and configuration. When surgical operation is performed involving mandible such as dantal implant treatment, extraction of an impacted third molar, sagittal split ramus osteotomy, etc, the position of mandibular canal should be considered. Bifid mandibular canal clinically causes troublesome cases of anesthesia when inferior alvelor nerve block, especially is performed extraction of an impacted third molar. Therefore, It is important for clinicians to recognize the presence of bifid canals on radiographys. Nowadays, the position of mandibular canal can be measured precisely by using Dental CT. It is not found by panorama image but is found by Dental CT sometimes. Among the patients, which take panorama and Dental CT simultaneously, for tooth extraction of lower impacted third molar in our department, we report the case that did not identifying in panorama but identifying it in Dental CT.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.350-359
• /
• 2005

Sagittal split ramus osteotomy(SSRO) has been commonly performed in the mandibular prognathism. The previous studies of the mandibular anatomy for SSRO have mostly been used in dry skull without consideration of age, sex or jaw relationship of patients. This study was performed to evaluate the location of mandibular canal and the anatomy of ramus, such as the location of mandibular lingula and the ramal bone marrow, which were associated with SSRO procedures, in the patients with mandibular prognathism and normal young adults by using computerized tomographs(CT) and 3D images. The young adults at their twenties, who were considered to complete their skeletal growth, and seen in the Department of Orthodontics and Oral and Maxillofacial Surgery in Chonnam National University Hospital between March 2000 and May 2003, were selected. This study was performed in 30 patients (15men, 15women) who were diagnosed as skeletal class I normal relationship, and another 30 patients (15men, 15women) who were diagnosed as skeletal class III relationship upon clinical examination and lateral cephalometric radiographs. The patients were divided into 2 groups : Class I group, the patients who had skeletal class Ⅰ normal relationship(n=30, 15men, 15women), and Class III group, the patients who had skeletal class III relationship(n=30, 15men, 15women). Facial CT was taken in all patients, and pure 3D mandibular model was constructed by V-works version 4.0. The occlusal plane was designed by three points, such as the mesiobuccal cusp of both mandibular 1st molar and the incisal edge of the right mandibular central incisor, and used as a reference plane. Distances between the tip of mandibular lingula and the occlusal plane, the sigmoid notch, the anterior and the posterior borders of ramus were measured. The height of ramal bone marrow from the occlusal plane and the distance between mid-point of mandibular canal and the buccal or lingual cortex of the mandible in the 1st and 2nd molars were measured by V-works version 4.0. Distance(Li-OP) between the occlusal plane and the tip of mandibular lingula of Class III Group was longer than that of Class I Group in men(p<0.01), but there was no significant difference in women between both groups. Distance(Li-SN) between the sigmoid notch and the tip of mandibular ligula of Class III group was longer than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(Li-RA) between the anterior border of ramus and the tip of mandibular lingula of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Distance(Li-RP) between the posterior border of ramus and the tip of mandibular lingula of Class III Group was slightly shorter than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(RA-RP) between the anterior and the posterior borders of ramus of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Longer the distance(SN-AN) between the sigmoid notch and the antegonial notch was, longer the vertical ramal length above occlusal plane, higher the location of mandibular lingula, and shorter the antero-posterior ramal length were observed(p<0.01). Height of ramal bone marrow of Class III Group was higher than that of Class I Group in men and women(p<0.01). Distance between mandibular canal and buccal cortex of Class III Group in 1st and 2nd lower molars was shorter than that of Class I Group in men and women (p<0.05 in 1st lower molar in men, p<0.01 in others). These results indicate that there are some anatomical differences between the normal occlusal patients and the mandibular prognathic patients, such as the anterior-posterior length of ramus, the height of ramal bone marrow, and the location of mandibular canal.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.294-305
• /
• 2009

Purpose: This retrospective study evaluated the changes in hyoid bone and tongue positions as well as oral cavity volume after mandibular setback by BSSRO. Materials and Methods: 18 Koreans who underwent BSSRO to correct mandibular prognathism were studied. Lateral cephalograms were taken and traced preoperatively (T0), immediately (T1) and approximately 6 months postoperatively (T2). Submentovertex radiograghs were taken and traced before surgery (T0) and about 6 months after surgery (T2). The area and volume of oral cavity, the vertical and horizontal dimensions of the hyoid bone and tongue dorsum were measured. Results: Mandibular setback surgery resulted in a significant reduction of lower oral cavity volume. The hyoid bone displaced posteroinferiorly immediately after surgery, and it tended to return to its original vertical position at 6 month after mandibular setback by BSSRO. The retropalatal space around tongue was maintained and the retrolingual space around tongue was reduced immediately postoperatively. The readaptation of tongue was not evident for that the follow up period was not long enough. No significant statistical correlations between the amounts of mandibular setback and the changes of oral cavity volume were observed. Conclusion: Mandibular setback surgery resulted in a significant reduction of lower oral cavity volume, which was most likely attributable to the posterior movement of the mandible. More subjects and long-term observations should be performed to assess the changes of oropharyngeal configuration following mandibular setback surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.173-181
• /
• 2003

Purpose : This study was intended to evaluate the positional relationship between the hyoid bone and the mandible in patients with mandibular protrusion after mandibular set-back surgery by means of 3D-CT. Materials and methods : Preoperative(3 weeks before) and postoperative (6 weeks after) 3D-CT & cephalogram were taken on 32 patients(12 male, 20 female, mean age of 23.2) treated by bilateral sagittal split osteotomy with rigid fixation. The angular measurement on 3D-CT basilar view were deviation of Me & H, long axis angle of left & right cornu majus. The lineal measurement on 3D-CT basilar view were composed of intercondylar line and coordinates(x,y) of Me & H. The angular & lineal measurement of lateral cephalogram were composed of mandibular plane angle, SNA, SNB, ANB, FH-NA & FH-NB, and coordinates(x,y) of B, Pog, Me & H, PAS, Lpw, MPH and IAS. On the frontal cephalogram, deviation of Me were evaluated. Results : The mean mandibular set-back was 8.0mm horizontally and mandibular plane angle was slightly increased. The hyoid bone was displaced postero-inferiorly, the distance between MP(mandibular plane) and H(hyoid bone) was increased and the posterior airway space values (PAS, Lpw, IAS) were decreased. The coordinates Me(x,y), H(x,y) and deviation angle Me'& H' were revealed the strong positive correlation. Conclusion : The results revealed that the horizontal, vertical and transverse relationship of the mandibular and the hyoid bone movements were significantly correlated in patients performed mandibular set-back surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.123-128
• /
• 1993

For the purpose of studying postsurgical stability of mandibular prognathism, 18 patients(8 men and 10 women) were selected who underwent sagittal split ramus osteotomy and lateral cephalograms taken preoperatively, immediate postoperatively, and over 6-month follow-up were traced and analysed. The following results were obtained. 1. Average magnitude of setback vas 11.0mm, and aberage relapse was 3.0mm, so the rate of relapse was 27%. 2. Magnitude of mandibular setback contributed to relapse. 3. The patients of less than 10mm setback showed average 10% of relapse rate, and it was of little clinical significance. 4. Proper detachment of pterygomasseteric sling prevention of clockwise rotation of proximal segment and rigid fixation are recommended for the better postoperative stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.4
• /
• pp.255-268
• /
• 1992

There are various modalities in the treatment of facial asymmetry, but in severe case with TMD by actively growing deformed condyle, the treatment choice is removing the condyle growth center and TMD symptom such as click or muscular discomfort. In our one case, the patient was complain of facial asymmetry. There are severe deformed condyle head with bird-head fashion and enlarged mandibular ramus and body vertically about 18 mm, overgrowthed Rt. mandible body horizontally about 20 mm. She had intermittent Lt. TMJ clicking and muscular discomfort. The author diagnosed it as Lt. hemimandibular hyper-plasia & R, hemimandibular elongation, a combination form with TMD. the condyle was in active growing state in scintigraphic analysis. So we extirpated the deformed condyle by intrasoral sagittal split ramus osteotomy and reshaped the condyle and mandibular distal fragment extraorally. The distal fragment was readapted in glenoid fossa and fixated. In Rt. mandibular body area, autogenous onlay bone graft on the inferior border of mandible was performed to correct the asymmetry. The clicking and facial asymmetry was corrected and we report this results with other literature findings.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.172-178
• /
• 2000

When we establish treatment planning of facial asymmetry, we must predict each asymmetrical element that will be changed upon coronal, axial, sagittal plane. At the visual point, prediction of the change of coronal plane is most important. It is important difference between Rt. and Lt. mandibular angle belonging to posterior coronal plane, as well as anterior coronal plane, such as upper and lower incisor, or midline of chin point. Several methods for control bulk of mandibular angle are additional angle shaving after osteotomy, grinding contact area between proximal and distal segment for decrease the volume, or bone graft for increase the volume. But, at the point of bimaxillary surgery, transverse position of posterior maxilla is an important factor for control it. So, we would report transverse movement of posterior maxilla for decrease asymmetry on the posterior coronal plane of face, that is, asymmetry of mandibular angular portion.