• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.321-327
• /
• 2017

PURPOSE. The aim of this study was to investigate dental arch dimensions and to classify arch shape in Korean young adults. MATERIALS AND METHODS. The sample included 50 Koreans with age ranging from 24 to 32 years. Maxillary and mandibular casts were fabricated using irreversible hydrocolloid and type III dental stones. Incisor-canine distance, $incisor-1^{st}$ molar distance, $incisor-2^{nd}$ molar distance, intercanine distance, $inter-1^{st}$ molar distance, and $inter-2^{nd}$ molar distance in both the maxillary and mandibular arch were measured using a three-dimensional measuring device. The dental arch was classified into three groups using five ratios from the measured values by the K-means clustering method. The data were analyzed with one-way analysis of variance. RESULTS. Arch lengths (IM2D, $incisal-2^{nd}$ molar distance) were 44.13 mm in the maxilla and 40.40 mm in the mandible. Arch widths (M2W, inter $2^{nd}$ molar width) were 64.12 mm in the maxilla and 56.37 mm in the mandible. Distribution of the dental arch form was mostly ovoid shape (maxilla 52% and mandible 56%), followed by the V-shape and the U-shape. The arch width for the U-shape was broader than for the other forms. CONCLUSION. This study establishes new reference data for dental arch dimensions for young Korean adults. The most common arch form is the ovoid type in the maxilla and mandible of Koreans. Clinicians should be aware of these references and classify arch type before and during their dental treatment for effective and harmonized results in Koreans.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권3호
• /
• pp.196-204
• /
• 2002

For the study of its stability when the screw has been fixed after sagittal split ramus osteotomy(SSRO) of the mandible, the methods of screw arrangement are classified into two types, triangular and straight. The angles of screws to the bone surface are classified as perpendicular arrangements, the $60^{\circ}$ anterioinferior screw, known as triangular, and the most posterior screw, called straight arrangement, thus there are four types. The finite element method model has been made by using a three dimensional calculator and a supercomputer. The load directions are to the anterior teeth, premolar region, and molar region, and the bite force is 1 Kgf to each region. The distribution of stress, the von-Mises yield strength, and safety of margin refer to the total sum of transformed energy have been studied by comparison with each other. The following conclusion has been researched : 1. When shear stress is compared, in the triangular arrangement in the form of "ㄱ", the anterosuperior screw is seen at contributing to the support of the bone fragment. In the straight arrangement, substantial stress is seen to be concentrated on the most posterior angled screw. 2. When the von-Mises yield strength is compared, it seemed that the stress concentration on the angled anteroinferior screw is higher, it shows a higher possibility of fracture than any other screw. In the straight arrangement, stress appeared to be concentrated on the most posteriorly angled screw. 3. When the safety margins of the transfomed energy are compared, the energy conduction is much greater in the case of the angled screw than in the case of the perpendicular screw. The triangular arrangement in the form of "ㄱ" shows a superior clinical sign to that of the straight arrangement. Judging from the above results, when the screw fixation is made after SSRO in practical clinical cases, two screws should be inserted in the superior border of mandibular ramus and a third screw of mandibular inferior border should be inserted in the form of triangular. All screws on the bony surface should be placed perpendicularly-$90^{\circ}$ angles apparently best promote bony support and stability.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권3호
• /
• pp.293-299
• /
• 2008

Bite force is created by the force of adjacent teeth accompanied with tension of masticatory muscle. The bite force value is greater in male than in female and ha maximum value at first molar. Masseter muscle is associated with bite force and during muscle contraction the electric signal is expressed in EMG form. The aim of the study is to assess recovery time for masseter muscle activity and according to each part of bite force after open reduction with internal fixation when mandibular angle fracture and subcondyle fracture occurred. And to determine the appropriate period for mandibular fracture patients to have normal masticatory activity. 30 patients with normal bite condition was selected for control group and from April, 2007 to September, 2007, 20 patients who visited our department of oral and maxillofacial surgery of Dankook University, were selected for the study and were diagnosed as mandibular angle fracture and subcondyle fracture. For control group, the bite force for incisors, canine, premolars and molars and activity of the masseter muscle was measured and compared for 1, 2, 3, 4, 6 and 8 weeks. That was divided as fracture side and normal side. Mann-Whitney U test was performed for significant difference and the following result was obtained. 1. The maximum voluntary bite force for incisors, canine, premolars and molars portion were 0.113 kN, 0.182kN, 0.295kN and 0.486kN and the masseter muscle activity was 0.192 volts in the control group. 2. The maximum bite force at fracture side was recovered by 4th weeks for incisors, 6th weeks for canine and premolars and 8th weeks for molars and the masseter muscle activity was recovered by 6th weeks in the experimental group. 2. The maximum bite force at normal side was recovered by 4th weeks for incisors, 6th weeks for canine, premolars and molars and the masseter muscle activity was recovered by 3rd weeks in the experimental group. 3. The method for internal fixation by 2.0mm miniplates at both superior and inferior border had no complications according for twenty patients and had a satisfactory recovery. According to the result, patient with mandibular angle fracture and subcondyle fracture, 8 weeks was required for bite force recovery. Therefore, patients with open reduction and internal fixation under general anesthesis, it can be assumed that 8 weeks was needed after operation in order to have normal bite force and masseter muscle recovery.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.795-804
• /
• 1997

Developmental dental morphological anomalies are fusion, gemination, twinning, concrescence and etc. They may cause many problems in conservative, periodontal and esthetic aspects. Fusion is a condition where two separate tooth buds unite at some stage in their development to form a bifid crown. If tooth contact occurs early, at least before the start of calcification, the two teeth may be completely unites to form a single large tooth. If tooth contact occurs after the time when a portion of the tooth crown has completed its formation, there may be union of the roots only. In fusion the dentin is always confluent. Fusion teeth is more common in the deciduous than in the permanent dentition. Fused teeth are relatively rare, and are mostly mandibular anterior teeth. Fusion of normal and supernumerary teeth or between normal teeth may occurs. The exact etiology factor of fusion is unknown, but genetic and environmental factors seems to be related. A variety of complications and subsequent treatments have been suggested on this teeth. Periodontal conditions may arise due to a groove formed at the line of fusion of the two teeth. Crowding or Protrusion with potential for malocclusion or delayed eruption of adjacent teeth. Fusion teeth appear in the anterior region, they usually cause esthetic problems. Treatments vary depending on the problem, the location, and the extent of fusion. Treatment of fused teeth has been reported from endodontic, orthodontic, periodontic, surgical and multidisciplinary. This report presents the esthetic improvements by separation of two clinical crowns. Bone reduction or endodontic treatments are not required.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• 대한치과교정학회지
• /
• 제32권1호통권90호
• /
• pp.43-49
• /
• 2002

치아의 형태 이상, 선천결손 등에 의해 손상된 상하악 전치부 치열에서는 교정치료만으로는 적절한 기능 교합관계를 설정하지 못하는 경우가 많다. 치료후 상하악 전치부 치열에서 어떠한 치료가 필요할지를 미리 예측할 수 있다면 치료효율을 높일 수 있을 뿐 아니라, 타 분야와의 협진에도 보다 유리할 것이다. 이를 위해 이전의 연구에서는 한국인 정상 교합자를 이용한 견치간 폭경(intercanine width), 치열궁 장경(segment depth)과 치열궁 둘레(arch perimeter)간의 상관관계를 구했으며, 이번에는 이러한 관계를 이용한 컴퓨터 프로그램을 제작한 후 손상된 상하악 전치부 치열을 보이는 두 환자에게 이 프로그램을 치료 계획시 적용하여 보았다. 프로그램 적용 결과, 치료 계획시 필요한 변화량에 대한 정보와 각 변수간 변화(견치간 폭경, 치열궁 장경, 치열궁 둘레)에 따른 전치부 교합관계 변화를 보다 명확히 보여주었다. 추후 악안면 형태에 따른 전치부 치축변화와 치열궁 변화의 관계, 안정성 있는 견치간 폭경에 대한 정보를 제공한다면, 전치부에 대한 3차원 occlusogram의 제작이 가능할 것으로 기대된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.83-88
• /
• 2011

The goal of this treatment is the surgical-orthodontic eruption of impacted permanent teeth associated with a large dentigerous cyst in a preadolescent patient. Although enucleation of the entire cyst and the extraction of impacted teeth are common treatments, missing permanent teeth cause several problems in young patients. In this report, an 11-year-old female visited with the chief complaint of a large radiolucent lesion from the mandibular anterior area to the left mandibular posterior area. The permanent left canine and premolars were displaced toward the mandibular inferior border area. The extraction of infected deciduous teeth and marsupialization were performed. After 4 months, orthodontic buttons for forced eruption were applied to the impacted permanent teeth. The teeth emerged into the oral cavity 3 months after the orthodontic treatment. Although the root form was abnormal, there were no other pathogenic signs. The alveolar bone had a normal trabecular pattern and the teeth appeared to be well maintained at postoperative 24 months.

• 대한치과의사협회지
• /
• 제22권7호통권182호
• /
• pp.607-620
• /
• 1984

Mandibular Kinesiograph (MKG-5R)으로부터 얻어지는 자료의 유효성에 관한 연구를 위하여 비철, 비자석성의 기구를 이용해서 3cm×4cm×5cm의 4차원적 입체공간내에서 수행하였다. Kinesiograph로 부터의 직접 얻어지는 자료(관찰치)와 실제 움직인 거리(실제치)간의 관계를 먼저 보기위해 Scatter plot과 Correlation이 연구됐다. 그러나 최종의 목표는 어떤 형태의 공식을 만들어 이것으로 Kinesiograph관찰치를 이용, 실제치를 알도록 하는 것이었으므로 관찰치의 통계학적 회귀분석이 수행되었다. 통계분석의 결과는 Kinesiograph 관찰치와 실제치 간의 강한 상관관계를 보였다. 그러나 높은 상관계수가 반드시 얻어진 선형모형의 완벽한 예측성을 의미하는 것은 아니다. 이 연구로부터 얻어진 선형모형이 실제치를 모두 완벽하게 예측할수는 없었다. 그 이유로서는 종속변수(실제치)의 불연속성과 관찰치(비종속변수) 상호간의 독랩성 때문이다. 결론적으로 Kinesiograph가 어떤 형태로든 적절한 방법에 의해 수정이 있지 않으면 그 계통자체내에 내재하는 비선형적 특성 때문에 그 이용이 하악운동의 제한된 범위내에만 적용될 수 있다.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.