• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• 대한치과교정학회지
• /
• 제34권2호
• /
• pp.153-163
• /
• 2004

II급 부정교합 치료 후 일어나는 재발에 영향을 미치는 요소를 알아보기 위하여 치료 후 결과가 안정하게 유지된 군과 재발이 일어난 군으로 구분하여 골격 및 치성요소를 비교하였다. 치료 전과 치료 후 측모 두부방사선사진을 이용하여 t-test와 상관분석을 시행한 결과 다음과 같은 결론을 얻었다. 1. 안정군과 재발군 간에 치료 전 골격 및 치성 관계는 대체로 차이가 없었다. 2. 안정군에서 하악골의 전방성장이 더 많이 일어났다. 3. 안정군에서의 하악 전치는 더 직립되었으며 상악전치는 설측 경사가 적은 경향을 보였다. 4. 재발군에서 교합평면이 전하방으로 경사되는 경향을 보였다.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

• 대한치과교정학회지
• /
• 제50권3호
• /
• pp.216-226
• /
• 2020

Root resorption can be caused by several factors, including contact with the cortical bone. Here we report a case involving a 21-year-old female with Angle Class II, division 1 malocclusion who exhibited significant root resorption in the maxillary right central incisor after orthodontic treatment. The patient presented with significant left-sided deviation of the maxillary incisors due to lingual dislocation of the left lateral incisor and a Class II molar relationship. Cephalometric analysis demonstrated a Class I skeletal relationship (A point-nasion-B point, 2.5°) and proclined maxillary anterior teeth (upper incisor to sella-nasion plane angle, 113.4°). The primary treatment objectives were the achievement of stable occlusion with midline agreement between the maxillary and mandibular dentitions and appropriate maxillary anterior tooth axes and molar relationship. A panoramic radiograph obtained after active treatment showed significant root resorption in the maxillary right central incisor; therefore, we performed cone-beam computed tomography, which confirmed root resorption along the cortical bone around the incisive canal. The findings from this case, where different degrees of root resorption were observed despite comparable degrees of orthodontic movement in the bilateral maxillary central incisors, suggest that the incisive canal could be an inducing factor for root resorption. However, further investigation is necessary to confirm this assumption.

• 대한소아치과학회지
• /
• 제33권2호
• /
• pp.311-316
• /
• 2006

중심교합위 상태에서 편측이나 양측으로 구치부의 상악치아가 하악치아의 협측으로 위치한 경우를 scissors bite라고 한다. 이런 부정교합은 상악의 폭이 크거나 하악의 폭이 좁은 경우 발생한다. 이로 인해 턱의 성장이 방해를 받고 악궁간 부조화를 유발하며 적절한 저작을 할 수 없게 된다. 따라서 scissors bite는 즉시 차단교정을 해야하며 일반적으로 scissors bite의 치료는 고정성 또는 가철성 장치를 이용하여 하악을 확장한다. 이에 저자는 scissors bite를 보이는 환아의 4세의 두 명의 남아에게 Schwarz장치를 이용하여 양호한 결과를 얻어 scissors bite의 치료법 제시에 도움이 되고자 보고하는 바이다.

• 대한두개안면성형외과학회지
• /
• 제15권2호
• /
• pp.53-58
• /
• 2014

Background: Maxillomandibular fixation (MMF) is usually used to treat double mandibular fractures. However, advancements in reduction and fixation techniques may allow recovery of the premorbid dental arch and occlusion without the use of MMF. We investigated whether anatomical reduction and microplate fixation without MMF could provide secure immobilization and correct occlusion in double mandibular fractures. Methods: Thirty-four patients with double mandibular fractures were treated with open reduction and internal fixation without MMF. Both fracture sites were surgically treated. For bony fixations, we used microplates with or without wire. After reduction, each fracture site was fixed at two or three points to maintain anatomical alignment of the mandible. Interdental wiring was used to reduce the fracture at the superior border and to enhance stability for 6 weeks. Mouth opening was permitted immediately. Results: No major complications were observed, including infection, plate exposure, non-union, or significant malocclusion. Five patients experienced minor complications, among whom the only one patient experienced a persistant but mild malocclusion with no need for additional management. Conclusion: This study showed that double mandibular fractures correction with two-or three-point fixation without MMF simplified the surgical procedure, increased patient comfort, and reduced complications, due to good stability and excellent adaptation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권3호
• /
• pp.291-299
• /
• 1991

We retrospectively reviewed 334 inpatients who sustained a total of 518 mandibular fractures and who ewer treated in our department between l980-1990. This results were obtained as follows : 1. In respect of incidence, there were the highest frequency in July, and the lowest frequency in May. The number of patients has not been increased year after year due to competition with other department in our hospital. 2. The age frequency was the highest in the 2nd decade(38.9%) and the ratio of man to women was 4.9 : 1. 3. The most frequent cause of mandibular fracture was traffic accident(43.4%), and the next was fall down(24.3%), fist blow(71%), industrial accident(21%) and others in order. In the traffic accident, autobicycle accident was 14.1%. 4. The most common location of mandibular fracture was symphysis(38.8%), condyle(20.7% ), angle(19.9%) and body(15.1%) were next in order of frequency. The classification by location of fracture, the frequency of single fracture was 54.8%. 5. In 334 patients of mandibular fracture, the frequency of associated injuries was facial laceration(58.4%), teeth injuries(37.7%), extremity injuries(13.2%) were next in order of frequency. 6. The patients arrived in hospital immediately within 24 hours after accident wee 61.4% of all. In respect of treatment, open reduction was 68.7% of all. 7. Complications including infection were present 11.1% of patient. Other complications inclued delayed healing malocclusion, malocclusion and neurologic problem.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권1호
• /
• pp.91-96
• /
• 2007

법랑질 형성부전증은 전치부 개교합과 같은 골격적인 문제를 자주 동반하며, 이러한 경우 구강악안면외과, 보철과, 보존과, 교정과 의사들이 함께 치료하여야 한다. 본 증례는 법랑질의 약화와 치아 우식증 등의 이유로 일반적인 교정치료를 시행할 수 없어 보철적 방법으로 치료하였다. 보존적, 보철적 방법을 이용하여 술전 교정과 같은 안정된 교합을 형성하였다. 악교정 수술을 시행하고 SAS 등을 이용하여 악간고정을 시행하여 양호한 결과를 얻을 수 있었다.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.161-169
• /
• 2019

Objective: To evaluate the effectiveness of the Frog appliance in three dimensions by using cone-beam computed tomography (CBCT) images. Methods: Forty patients (21 boys and 19 girls), averaged 11.7 years old, with an Angle Class II division 1 malocclusion were included in our study. They had either late mixed dentition or early permanent dentition, and the maxillary second molars had not yet erupted. All patients underwent CBCT before and after the treatment for measuring changes in the maxillary first molars, second premolars, central incisors, and profile. Paired-samples t-test was used to compare the mean difference in each variable before treatment and after the first phase of treatment. Results: The maxillary first molars were effectively distalized by 4.25 mm (p < 0.001) and 3.53 mm (p < 0.05) in the dental crown and root apex, respectively. The tipping increased by $2.25^{\circ}$, but the difference was not significant. Moreover the teeth moved buccally by 0.84 mm (p < 0.05) and 2.87 mm (p < 0.01) in the mesiobuccal and distobuccal cusps, respectively, whereas no significant changes occurred in the root apex. Regarding the anchorage parts, the angle of the maxillary central incisor's long axis to the sella-nasion plane increased by $2.76^{\circ}$ (p < 0.05) and the distance from the upper lip to the esthetic plane decreased by 0.52 mm (p = 0.01). Conclusions: The Frog appliance effectively distalized the maxillary molars with an acceptable degree of tipping, distobuccal rotation, and buccal crown torque, with only slight anchorage loss. Furthermore, CBCT image demonstrated that it is a simple and reliable method for three-dimensional analysis.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.170-180
• /
• 2019

Objective: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). Methods: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. Results: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. Conclusions: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.